From mboxrd@z Thu Jan 1 00:00:00 1970 Message-ID: <53353524.9020605@freescale.com> Date: Fri, 28 Mar 2014 16:39:00 +0800 From: Huang Shijie MIME-Version: 1.0 To: =?UTF-8?B?TG90aGFyIFdhw59tYW5u?= Subject: Re: [PATCHv2 1/1] mtd: gpmi: make blockmark swapping optional References: <532BCFCC.4080205@freescale.com> <1395399017-19005-1-git-send-email-LW@KARO-electronics.de> <20140324095902.GB11377@localhost> <20140326095156.3e5585b8@ipc1.ka-ro> <5332AEE7.2040402@freescale.com> <20140326125502.0e8d0657@ipc1.ka-ro> <20140327095956.GA29623@localhost> <20140327132109.06258526@ipc1.ka-ro> <5334D9F7.2030001@freescale.com> <20140328091646.1ce03f90@ipc1.ka-ro> In-Reply-To: <20140328091646.1ce03f90@ipc1.ka-ro> Content-Type: text/plain; charset="UTF-8"; format=flowed Content-Transfer-Encoding: quoted-printable Cc: Fabio Estevam , Mark Rutland , Shawn Guo , Russell King , Pawel Moll , Arnd Bergmann , Ian Campbell , Artem Bityutskiy , linux-doc@vger.kernel.org, linux-kernel@vger.kernel.org, devicetree@vger.kernel.org, Rob Herring , linux-mtd@lists.infradead.org, linux-arm-kernel@lists.infradead.org, Rob Landley , Kumar Gala , Brian Norris , David Woodhouse , Sascha Hauer , Shawn Guo List-Id: Linux MTD discussion mailing list List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , =E4=BA=8E 2014=E5=B9=B403=E6=9C=8828=E6=97=A5 16:16, Lothar Wa=C3=9Fmann = =E5=86=99=E9=81=93: > Still there is no need for the Linux NAND driver to be able to read or > write partitions in a format that the Boot ROM can understand. Thus it If you do not use the NAND boot, there really no need to do so. Since you need the NAND boot, we should enable the swapping for imx28. > is perfectly legal to allow disregarding the BB marks and solely rely o= n > a flash based BBT. > The BB mark is in the page 0 of a NAND block. But the swapping can occur=20 in _each_ page of a NAND block, _NOT_ only the page 0. I think you are confusing at these two things. thanks Huang Shijie