From mboxrd@z Thu Jan 1 00:00:00 1970 Message-ID: <5373FD38.3060805@ti.com> Date: Thu, 15 May 2014 02:33:12 +0300 From: Ivan Khoronzhuk MIME-Version: 1.0 To: Santosh Shilimkar , Brian Norris , David Woodhouse Subject: Re: [PATCH] nand: davinci: add support for 4K page size nand devices References: <1399588265-7130-1-git-send-email-ivan.khoronzhuk@ti.com> <5370E6F3.3050705@ti.com> In-Reply-To: <5370E6F3.3050705@ti.com> Content-Type: text/plain; charset="ISO-8859-1"; format=flowed Content-Transfer-Encoding: 7bit Cc: grygorii.strashko@ti.com, linux-mtd@lists.infradead.org, Murali Karicheri , linux-kernel@vger.kernel.org List-Id: Linux MTD discussion mailing list List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , On 05/12/2014 06:21 PM, Santosh Shilimkar wrote: > On Thursday 08 May 2014 06:31 PM, Ivan Khoronzhuk wrote: >> From: Sandeep Paulraj >> >> It is needed for k2l keystone2 EVM which uses NAND flash with 4K page >> size, hence add support for 4K page size nand devices. >> >> Signed-off-by: Sandeep Paulraj >> Signed-off-by: Ivan Khoronzhuk >> --- >> >> Based on l2-mtd/master >> >> drivers/mtd/nand/davinci_nand.c | 41 ++++++++++++++++++++++++++++++----------- >> 1 file changed, 30 insertions(+), 11 deletions(-) >> >> diff --git a/drivers/mtd/nand/davinci_nand.c b/drivers/mtd/nand/davinci_nand.c >> index b922c8e..24a5769 100644 >> --- a/drivers/mtd/nand/davinci_nand.c >> +++ b/drivers/mtd/nand/davinci_nand.c >> @@ -520,6 +520,31 @@ static struct nand_ecclayout hwecc4_2048 = { >> }, >> }; >> >> +/* An ECC layout for using 4-bit ECC with large-page (4096bytes) flash, >> + * storing ten ECC bytes plus the manufacturer's bad block marker byte, >> + * and not overlapping the default BBT markers. >> + */ > Comment style .... > /* > * > */ yes >> +static struct nand_ecclayout hwecc4_4096 __initconst = { >> + .eccbytes = 80, >> + .eccpos = { >> + /* at the end of spare sector */ >> + 48, 49, 50, 51, 52, 53, 54, 55, 56, 57, >> + 58, 59, 60, 61, 62, 63, 64, 65, 66, 67, >> + 68, 69, 70, 71, 72, 73, 74, 75, 76, 77, >> + 78, 79, 80, 81, 82, 83, 84, 85, 86, 87, >> + 88, 89, 90, 91, 92, 93, 94, 95, 96, 97, >> + 98, 99, 100, 101, 102, 103, 104, 105, 106, 107, >> + 108, 109, 110, 111, 112, 113, 114, 115, 116, 117, >> + 118, 119, 120, 121, 122, 123, 124, 125, 126, 127, >> + }, >> + .oobfree = { >> + /* 2 bytes at offset 0 hold manufacturer badblock markers */ >> + {.offset = 2, .length = 46, }, >> + /* 5 bytes at offset 8 hold BBT markers */ >> + /* 8 bytes at offset 16 hold JFFS2 clean markers */ >> + }, >> +}; >> + >> #if defined(CONFIG_OF) >> static const struct of_device_id davinci_nand_of_match[] = { >> {.compatible = "ti,davinci-nand", }, >> @@ -796,18 +821,12 @@ static int nand_davinci_probe(struct platform_device *pdev) >> info->chip.ecc.mode = NAND_ECC_HW_OOB_FIRST; >> goto syndrome_done; >> } >> + if (chunks == 8) { > May be use some meaning macros instead of magic value '8' It just continues style used in the code: if (chunks == 1) { ... if (chunks == 4) { ... if (chunks == 8) { ... > >> + info->ecclayout = hwecc4_4096; >> + info->chip.ecc.mode = NAND_ECC_HW_OOB_FIRST; >> + goto syndrome_done; >> + } >> >> - /* 4KiB page chips are not yet supported. The eccpos from >> - * nand_ecclayout cannot hold 80 bytes and change to eccpos[] >> - * breaks userspace ioctl interface with mtd-utils. Once we >> - * resolve this issue, NAND_ECC_HW_OOB_FIRST mode can be used >> - * for the 4KiB page chips. >> - * >> - * TODO: Note that nand_ecclayout has now been expanded and can >> - * hold plenty of OOB entries. >> - */ >> - dev_warn(&pdev->dev, "no 4-bit ECC support yet " >> - "for 4KiB-page NAND\n"); >> ret = -EIO; >> goto err; >> >> -- Regards, Ivan Khoronzhuk