Re: [PATCH 6/7] Documentation: atmel-quadspi: add binding file for Atmel QSPI driver

[Cyrille Pitchen <cyrille.pitchen@atmel.com>]

Hi Sergei,

thanks for the review. For the next series I've removed all references to
"qspi" in the node example but the one from the compatible string.
I've also removed the leading 0 in the size of the second memory region.

Best Regards,

Cyrille

Le 17/07/2015 13:44, Sergei Shtylyov a écrit :
> Hello.
> 
> On 7/16/2015 6:27 PM, Cyrille Pitchen wrote:
> 
>> This patch documents the DT bindings for the driver of the Atmel QSPI
>> controller embedded inside sama5d2x SoCs.
> 
>> Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com>
>> ---
>>   .../devicetree/bindings/mtd/atmel-quadspi.txt      | 29 ++++++++++++++++++++++
>>   1 file changed, 29 insertions(+)
>>   create mode 100644 Documentation/devicetree/bindings/mtd/atmel-quadspi.txt
> 
>> diff --git a/Documentation/devicetree/bindings/mtd/atmel-quadspi.txt b/Documentation/devicetree/bindings/mtd/atmel-quadspi.txt
>> new file mode 100644
>> index 000000000000..a0d60ac7ae10
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/mtd/atmel-quadspi.txt
>> @@ -0,0 +1,29 @@
>> +* Atmel Quad Serial Peripheral Interface (QSPI)
>> +
>> +Required properties:
>> +  - compatible : Should be "atmel,sama5d2-qspi"
>> +  - reg : the first contains the register location and length,
>> +          the second contains the memory mapping address and length
>> +  - interrupts : Should contain the interrupt for the device
>> +  - clocks : The clock needed by the QSPI controller
>> +  - #address-cells : should be 1
>> +  - #size-cells : should be 0
>> +
>> +Example:
>> +
>> +qspi0: qspi@f0020000 {
> 
>     Once again, the ePAPR standard tells up to call the node just "spi", not "qspi".
> 
>> +    compatible = "atmel,sama5d2-qspi";
>> +    reg = <0xf0020000 0x100>,
>> +          <0xd0000000 0x08000000>;
> 
>    Either you use the leading zeroes or you don't. :-)
> 
> [...]
> 
> MBR, Sergei
>