linux-mtd.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: Alex Smith <alex.smith@imgtec.com>
To: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Cc: <linux-mtd@lists.infradead.org>,
	Brian Norris <computersforpeace@gmail.com>,
	David Woodhouse <dwmw2@infradead.org>,
	"Zubair Lutfullah Kakakhel" <Zubair.Kakakhel@imgtec.com>,
	<linux-kernel@vger.kernel.org>
Subject: Re: [PATCH v4 0/3] mtd: nand: jz4780: Add NAND and BCH drivers
Date: Mon, 7 Sep 2015 15:54:52 +0100	[thread overview]
Message-ID: <55EDA53C.6080305@imgtec.com> (raw)
In-Reply-To: <20150906203839.GB7745@laptop.cereza>

On 06/09/2015 21:38, Ezequiel Garcia wrote:
> On 27 Jul 02:50 PM, Alex Smith wrote:
>> Hi,
>>
>> This series adds support for the BCH controller and NAND devices on
>> the Ingenic JZ4780 SoC.
>>
>> Tested on the MIPS Creator Ci20 board. All dependencies are now in
>> mainline so it should be possible to compile test now.
>>
>> This version of the series has been rebased on 4.2-rc4, and also adds
>> an additional patch to fix an issue that was encountered in the
>> external Ci20 3.18 kernel branch.
>>
>> Review and feedback welcome.
>>
> 
> The NEMC driver seems to be upstream. Any chance you submit devicetree
> changes as well for Ci20 (so we can actually test this)?

Sure, can do. The pinctrl driver is not yet upstream (needs some work) which is why I didn't add the DT changes initially, but at least if you boot the board from the NAND then U-Boot should have left everything in a state usable by the kernel.

Thanks,
Alex

> 
>> Thanks,
>> Alex
>>
>> Alex Smith (3):
>>   mtd: nand: increase ready wait timeout and report timeouts
>>   dt-bindings: binding for jz4780-{nand,bch}
>>   mtd: nand: jz4780: driver for NAND devices on JZ4780 SoCs
>>
>>  .../bindings/mtd/ingenic,jz4780-nand.txt           |  57 ++++
>>  drivers/mtd/nand/Kconfig                           |   7 +
>>  drivers/mtd/nand/Makefile                          |   1 +
>>  drivers/mtd/nand/jz4780_bch.c                      | 354 +++++++++++++++++++
>>  drivers/mtd/nand/jz4780_bch.h                      |  42 +++
>>  drivers/mtd/nand/jz4780_nand.c                     | 376 +++++++++++++++++++++
>>  drivers/mtd/nand/nand_base.c                       |  15 +-
>>  7 files changed, 849 insertions(+), 3 deletions(-)
>>  create mode 100644 Documentation/devicetree/bindings/mtd/ingenic,jz4780-nand.txt
>>  create mode 100644 drivers/mtd/nand/jz4780_bch.c
>>  create mode 100644 drivers/mtd/nand/jz4780_bch.h
>>  create mode 100644 drivers/mtd/nand/jz4780_nand.c
>>
>> -- 
>> 2.4.6
>>
>>
>> ______________________________________________________
>> Linux MTD discussion mailing list
>> http://lists.infradead.org/mailman/listinfo/linux-mtd/
> 

  reply	other threads:[~2015-09-07 14:55 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-07-27 13:50 [PATCH v4 0/3] mtd: nand: jz4780: Add NAND and BCH drivers Alex Smith
2015-07-27 13:50 ` [PATCH v4 1/3] mtd: nand: increase ready wait timeout and report timeouts Alex Smith
2015-09-06 20:37   ` Ezequiel Garcia
2015-09-07 14:38     ` Alex Smith
2015-07-27 13:50 ` [PATCH v4 2/3] dt-bindings: binding for jz4780-{nand,bch} Alex Smith
2015-09-07 17:16   ` Ezequiel Garcia
2015-07-27 14:21 ` [PATCH v4 3/3] mtd: nand: jz4780: driver for NAND devices on JZ4780 SoCs Alex Smith
2015-09-06 21:21   ` Ezequiel Garcia
2015-09-07 14:52     ` Alex Smith
2015-08-18 12:39 ` [PATCH v4 0/3] mtd: nand: jz4780: Add NAND and BCH drivers Alex Smith
2015-08-26 14:21   ` Alex Smith
2015-09-06 20:38 ` Ezequiel Garcia
2015-09-07 14:54   ` Alex Smith [this message]
2015-09-07 16:00     ` Ezequiel Garcia

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=55EDA53C.6080305@imgtec.com \
    --to=alex.smith@imgtec.com \
    --cc=Zubair.Kakakhel@imgtec.com \
    --cc=computersforpeace@gmail.com \
    --cc=dwmw2@infradead.org \
    --cc=ezequiel@vanguardiasur.com.ar \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mtd@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).