[PATCH 1/2] mtd: m25p80: fix retlen usage in m25p80_read and propagate errors

[Heiner Kallweit <hkallweit1@gmail.com>]

So far retlen usage in m25p80_read is different from retlen usage in other
places on the mtd subsystem. Usually bytes read are added to the current
value of *retlen, here the current value is ignored.
As a prerequisite for using m25p80_read in a loop if the transfer size is
limited we have to fix this.
Also propagate the return code of spi_sync.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
---
 drivers/mtd/devices/m25p80.c | 15 ++++++++-------
 1 file changed, 8 insertions(+), 7 deletions(-)

diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c
index c9c3b7f..c2d1f65 100644
--- a/drivers/mtd/devices/m25p80.c
+++ b/drivers/mtd/devices/m25p80.c
@@ -126,10 +126,9 @@ static int m25p80_read(struct spi_nor *nor, loff_t from, size_t len,
 	struct spi_device *spi = flash->spi;
 	struct spi_transfer t[2];
 	struct spi_message m;
-	unsigned int dummy = nor->read_dummy;
-
 	/* convert the dummy cycles to the number of bytes */
-	dummy /= 8;
+	unsigned int cmdlen = m25p_cmdsz(nor) + nor->read_dummy / 8;
+	int ret;
 
 	spi_message_init(&m);
 	memset(t, 0, (sizeof t));
@@ -138,7 +137,7 @@ static int m25p80_read(struct spi_nor *nor, loff_t from, size_t len,
 	m25p_addr2cmd(nor, from, flash->command);
 
 	t[0].tx_buf = flash->command;
-	t[0].len = m25p_cmdsz(nor) + dummy;
+	t[0].len = cmdlen;
 	spi_message_add_tail(&t[0], &m);
 
 	t[1].rx_buf = buf;
@@ -146,10 +145,12 @@ static int m25p80_read(struct spi_nor *nor, loff_t from, size_t len,
 	t[1].len = len;
 	spi_message_add_tail(&t[1], &m);
 
-	spi_sync(spi, &m);
+	ret = spi_sync(spi, &m);
 
-	*retlen = m.actual_length - m25p_cmdsz(nor) - dummy;
-	return 0;
+	if (m.actual_length > cmdlen)
+		*retlen += m.actual_length - cmdlen;
+
+	return ret;
 }
 
 /*
-- 
2.7.1