From: Roger Quadros <rogerq@ti.com>
To: <computersforpeace@gmail.com>
Cc: <tony@atomide.com>, <dwmw2@infradead.org>,
<ezequiel@vanguardiasur.com.ar>, <javier@dowhile0.org>,
<fcooper@ti.com>, <nsekhar@ti.com>,
<linux-mtd@lists.infradead.org>, <linux-omap@vger.kernel.org>,
<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH v5 00/26] memory: omap-gpmc: mtd: nand: Support GPMC NAND on non-OMAP platforms
Date: Mon, 29 Feb 2016 18:25:12 +0200 [thread overview]
Message-ID: <56D470E8.4070106@ti.com> (raw)
In-Reply-To: <1455916548-3441-1-git-send-email-rogerq@ti.com>
Brian,
On 19/02/16 23:15, Roger Quadros wrote:
> Hi,
>
> @Tony
> Patches 15 and 24 are new and will need your review.
> I've modified patch 22 to include the new am335x boards introduced since v4.4.
>
> Patches are based on top of omap-for-v4.6/dt so that the DT changes apply cleanly.
>
> @Brian
> If you can Ack the MTD related changes we can push the series (excluding DT patches)
> to an immutable branch and you can then pull it into l2-mtd.git
Gentle ping on this. Thanks.
cheers,
-roger
>
> Patches tested on:
> dra-evm, am437x-gp-evm, beagleboard-c4, beagleboard-c4-legacyboot
>
> Changelog:
> v5:
> -changed ready/busy# GPIO DT binding from "ready-gpio" to "rb-gpios".
> -use irqdomain for gpmc NAND interrupts: fifoevent and termcount
>
> v4:
> -Warn if using older incompatible DT i.e. compatible property not present
> in nand node.
> -Applied Tony's patch to fix broken ethernet on torpedo.
>
> v3:
> -Fixed and tested NAND using legacy boot on omap3-beagle.
> -Support rising and falling edge interrupts on WAITpins.
> -Update DT node of all gpmc users.
>
> Patches summary:
>
> We do a couple of things in this series which result in
> cleaner device tree implementation, faster perfomance and
> multi-platform support. As an added bonus we get to use the GPMC_WAIT
> pins as GPI/Interrupts.
>
> - Establish a custom interface between NAND and GPMC driver. This is
> needed because all of the NAND registers sit in the GPMC register space.
>
> - Clean up device tree support so that omap-gpmc IP and the omap2 NAND
> driver can be used on non-OMAP platforms. e.g. Keystone.
>
> - Implement GPIOCHIP for the GPMC WAITPINS. SoCs can contain
> 2 to 4 of these and most of them would be unused otherwise. It also
> allows a cleaner implementation of NAND Ready pin status for the NAND driver.
>
> - Implement GPMC IRQ domain to proivde the 2 NAND events and
> GPMC WAITPIN edge interrupts.
>
> - Implement GPIOlib based NAND ready pin checking for OMAP NAND driver.
> On dra7-evm, Read speed increases from 13768 KiB/ to 17246 KiB/s.
> Write speed was unchanged at 7123 KiB/s.
>
> This series is available at
> git@github.com:rogerq/linux.git
> in branch
> for-v4.6/gpmc-v5
>
> --
> cheers,
> -roger
>
> Roger Quadros (26):
> ARM: OMAP2+: gpmc: Add platform data
> ARM: OMAP2+: gpmc: Add gpmc timings and settings to platform data
> memory: omap-gpmc: Introduce GPMC to NAND interface
> mtd: nand: omap2: Use gpmc_omap_get_nand_ops() to get NAND registers
> memory: omap-gpmc: Add GPMC-NAND ops to get writebufferempty status
> mtd: nand: omap2: Switch to using GPMC-NAND ops for writebuffer empty
> check
> memory: omap-gpmc: Implement IRQ domain for NAND IRQs
> mtd: nand: omap: Copy platform data parameters to omap_nand_info data
> mtd: nand: omap: Clean up device tree support
> mtd: nand: omap: Update DT binding documentation
> memory: omap-gpmc: Prevent mapping into 1st 16MB
> memory: omap-gpmc: Move device tree binding to correct location
> memory: omap-gpmc: Support general purpose input for WAITPINs
> memory: omap-gpmc: Reserve WAITPIN if needed for WAIT monitoring
> memory: omap-gpmc: Support WAIT pin edge interrupts
> memory: omap-gpmc: Prevent GPMC_STATUS from being accessed via
> gpmc_regs
> mtd: nand: omap2: Implement NAND ready using gpiolib
> ARM: dts: dra7: Fix NAND device nodes.
> ARM: dts: dra7x-evm: Provide NAND ready pin
> ARM: dts: am437x: Fix NAND device nodes
> ARM: dts: am437x: Provide NAND ready pin
> ARM: dts: am335x: Fix NAND device nodes
> ARM: dts: am335x: Provide NAND ready pin
> ARM: dts: dm814x: Fix gpmc and NAND node
> ARM: dts: dm816x: Fix gpmc and NAND node
> ARM: dts: omap3: Fix gpmc and NAND nodes
>
> Documentation/devicetree/bindings/bus/ti-gpmc.txt | 130 ----
> .../bindings/memory-controllers/omap-gpmc.txt | 141 +++++
> .../devicetree/bindings/mtd/gpmc-nand.txt | 19 +-
> arch/arm/boot/dts/am335x-baltos-ir5221.dts | 10 +-
> arch/arm/boot/dts/am335x-chilisom.dtsi | 9 +-
> arch/arm/boot/dts/am335x-cm-t335.dts | 10 +-
> arch/arm/boot/dts/am335x-evm.dts | 8 +-
> arch/arm/boot/dts/am335x-igep0033.dtsi | 9 +-
> arch/arm/boot/dts/am335x-phycore-som.dtsi | 9 +-
> arch/arm/boot/dts/am33xx.dtsi | 4 +
> arch/arm/boot/dts/am4372.dtsi | 4 +
> arch/arm/boot/dts/am437x-cm-t43.dts | 7 +-
> arch/arm/boot/dts/am437x-gp-evm.dts | 9 +-
> arch/arm/boot/dts/am43x-epos-evm.dts | 9 +-
> arch/arm/boot/dts/dm8148-evm.dts | 8 +-
> arch/arm/boot/dts/dm814x.dtsi | 4 +
> arch/arm/boot/dts/dm8168-evm.dts | 8 +-
> arch/arm/boot/dts/dm816x.dtsi | 4 +
> arch/arm/boot/dts/dra62x-j5eco-evm.dts | 8 +-
> arch/arm/boot/dts/dra7-evm.dts | 7 +-
> arch/arm/boot/dts/dra7.dtsi | 4 +
> arch/arm/boot/dts/dra72-evm.dts | 7 +-
> arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts | 3 +-
> arch/arm/boot/dts/logicpd-torpedo-som.dtsi | 8 +-
> arch/arm/boot/dts/omap3-beagle.dts | 5 +-
> arch/arm/boot/dts/omap3-cm-t3x.dtsi | 6 +-
> arch/arm/boot/dts/omap3-devkit8000-common.dtsi | 4 +
> arch/arm/boot/dts/omap3-evm-37xx.dts | 8 +-
> arch/arm/boot/dts/omap3-gta04.dtsi | 4 +
> arch/arm/boot/dts/omap3-igep.dtsi | 6 +-
> arch/arm/boot/dts/omap3-igep0020-common.dtsi | 4 +-
> arch/arm/boot/dts/omap3-igep0030-common.dtsi | 4 +
> arch/arm/boot/dts/omap3-ldp.dts | 10 +-
> arch/arm/boot/dts/omap3-lilly-a83x.dtsi | 6 +-
> arch/arm/boot/dts/omap3-overo-base.dtsi | 6 +-
> arch/arm/boot/dts/omap3-pandora-common.dtsi | 4 +
> arch/arm/boot/dts/omap3-tao3530.dtsi | 6 +-
> arch/arm/boot/dts/omap3.dtsi | 4 +
> arch/arm/boot/dts/omap3430-sdp.dts | 6 +-
> arch/arm/mach-omap2/gpmc-nand.c | 7 +-
> drivers/memory/Kconfig | 1 +
> drivers/memory/omap-gpmc.c | 653 +++++++++++++--------
> drivers/mtd/nand/omap2.c | 193 ++++--
> include/linux/omap-gpmc.h | 177 ++----
> include/linux/platform_data/gpmc-omap.h | 167 ++++++
> include/linux/platform_data/mtd-nand-omap2.h | 12 +-
> 46 files changed, 1121 insertions(+), 611 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/bus/ti-gpmc.txt
> create mode 100644 Documentation/devicetree/bindings/memory-controllers/omap-gpmc.txt
> create mode 100644 include/linux/platform_data/gpmc-omap.h
>
next prev parent reply other threads:[~2016-02-29 16:26 UTC|newest]
Thread overview: 56+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-02-19 21:15 [PATCH v5 00/26] memory: omap-gpmc: mtd: nand: Support GPMC NAND on non-OMAP platforms Roger Quadros
2016-02-19 21:15 ` [PATCH v5 01/26] ARM: OMAP2+: gpmc: Add platform data Roger Quadros
2016-02-19 21:15 ` [PATCH v5 02/26] ARM: OMAP2+: gpmc: Add gpmc timings and settings to " Roger Quadros
2016-02-19 21:15 ` [PATCH v5 03/26] memory: omap-gpmc: Introduce GPMC to NAND interface Roger Quadros
2016-03-05 1:35 ` Brian Norris
2016-03-07 8:55 ` Roger Quadros
2016-02-19 21:15 ` [PATCH v5 04/26] mtd: nand: omap2: Use gpmc_omap_get_nand_ops() to get NAND registers Roger Quadros
2016-02-19 21:15 ` [PATCH v5 05/26] memory: omap-gpmc: Add GPMC-NAND ops to get writebufferempty status Roger Quadros
2016-02-19 21:15 ` [PATCH v5 06/26] mtd: nand: omap2: Switch to using GPMC-NAND ops for writebuffer empty check Roger Quadros
2016-02-19 21:15 ` [PATCH v5 07/26] memory: omap-gpmc: Implement IRQ domain for NAND IRQs Roger Quadros
2016-02-19 21:15 ` [PATCH v5 08/26] mtd: nand: omap: Copy platform data parameters to omap_nand_info data Roger Quadros
2016-02-19 21:15 ` [PATCH v5 09/26] mtd: nand: omap: Clean up device tree support Roger Quadros
2016-03-05 2:10 ` Brian Norris
2016-03-07 9:06 ` Roger Quadros
2016-03-05 2:28 ` Brian Norris
2016-03-07 9:02 ` Roger Quadros
2016-02-19 21:15 ` [PATCH v5 10/26] mtd: nand: omap: Update DT binding documentation Roger Quadros
2016-02-23 19:41 ` Rob Herring
2016-02-24 9:55 ` Roger Quadros
2016-03-05 2:04 ` Brian Norris
2016-03-07 9:46 ` Roger Quadros
2016-03-07 18:58 ` Brian Norris
2016-03-07 10:32 ` [PATCH v6 " Roger Quadros
2016-03-17 14:48 ` Rob Herring
2016-02-19 21:15 ` [PATCH v5 11/26] memory: omap-gpmc: Prevent mapping into 1st 16MB Roger Quadros
2016-02-19 21:15 ` [PATCH v5 12/26] memory: omap-gpmc: Move device tree binding to correct location Roger Quadros
2016-02-23 20:50 ` Rob Herring
2016-02-24 9:51 ` Roger Quadros
2016-02-19 21:15 ` [PATCH v5 13/26] memory: omap-gpmc: Support general purpose input for WAITPINs Roger Quadros
2016-03-07 9:34 ` Boris Brezillon
2016-03-07 9:38 ` Boris Brezillon
2016-03-07 10:02 ` Roger Quadros
2016-03-07 10:31 ` Boris Brezillon
2016-02-19 21:15 ` [PATCH v5 14/26] memory: omap-gpmc: Reserve WAITPIN if needed for WAIT monitoring Roger Quadros
2016-02-19 21:15 ` [PATCH v5 15/26] memory: omap-gpmc: Support WAIT pin edge interrupts Roger Quadros
2016-02-19 21:15 ` [PATCH v5 16/26] memory: omap-gpmc: Prevent GPMC_STATUS from being accessed via gpmc_regs Roger Quadros
2016-02-19 21:15 ` [PATCH v5 17/26] mtd: nand: omap2: Implement NAND ready using gpiolib Roger Quadros
2016-03-05 1:46 ` Brian Norris
2016-03-07 9:11 ` Roger Quadros
2016-03-07 9:22 ` Boris Brezillon
2016-02-19 21:15 ` [PATCH v5 18/26] ARM: dts: dra7: Fix NAND device nodes Roger Quadros
2016-02-19 21:15 ` [PATCH v5 19/26] ARM: dts: dra7x-evm: Provide NAND ready pin Roger Quadros
2016-02-19 21:15 ` [PATCH v5 20/26] ARM: dts: am437x: Fix NAND device nodes Roger Quadros
2016-02-19 21:15 ` [PATCH v5 21/26] ARM: dts: am437x: Provide NAND ready pin Roger Quadros
2016-02-19 21:15 ` [PATCH v5 22/26] ARM: dts: am335x: Fix NAND device nodes Roger Quadros
2016-02-19 21:15 ` [PATCH v5 23/26] ARM: dts: am335x: Provide NAND ready pin Roger Quadros
2016-02-19 21:15 ` [PATCH v5 24/26] ARM: dts: dm814x: Fix gpmc and NAND node Roger Quadros
2016-02-19 21:15 ` [PATCH v5 25/26] ARM: dts: dm816x: " Roger Quadros
2016-02-19 21:15 ` [PATCH v5 26/26] ARM: dts: omap3: Fix gpmc and NAND nodes Roger Quadros
2016-02-19 22:04 ` [PATCH v5 00/26] memory: omap-gpmc: mtd: nand: Support GPMC NAND on non-OMAP platforms Tony Lindgren
2016-02-22 10:15 ` Roger Quadros
2016-02-22 16:42 ` Tony Lindgren
2016-02-22 20:05 ` Roger Quadros
2016-02-22 20:12 ` nick
2016-02-29 16:25 ` Roger Quadros [this message]
2016-03-05 2:33 ` Brian Norris
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=56D470E8.4070106@ti.com \
--to=rogerq@ti.com \
--cc=computersforpeace@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=dwmw2@infradead.org \
--cc=ezequiel@vanguardiasur.com.ar \
--cc=fcooper@ti.com \
--cc=javier@dowhile0.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mtd@lists.infradead.org \
--cc=linux-omap@vger.kernel.org \
--cc=nsekhar@ti.com \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).