Re: UBIFS assert when rebooting a read only ubifs when it's been remounted r/w

[Richard Weinberger <richard@nod.at>]

Am 24.05.2016 um 15:23 schrieb Martin Townsend:
> On Tue, May 24, 2016 at 1:26 PM, Richard Weinberger <richard@nod.at> wrote:
>> Am 24.05.2016 um 12:37 schrieb Martin Townsend:
>>> Here's a link to the image
>>> https://file.io/0s7OA9
>>
>> 404 :-(
>>
>>> I've just tried on another board and can still get the same assert so
>>> it's not just a one off. I also saw this warning whilst formatting
>>> this board.  I tried reflashing again until I did not get the warning
>>> below but still saw the assert so I don't think they are related.
>>> ubiformat: mtd12 (nand), size 533725184 bytes (509.0 MiB), 4072
>>> eraseblocks of 131072 bytes (128.0 KiB), min. I/O size 2048 bytes
>>> libscan: scanning eraseblock 4071 -- 100 % complete
>>> ubiformat: 4070 eraseblocks are supposedly empty
>>> ubiformat: 2 bad eraseblocks found, numbers: 1324, 1640
>>> ubiformat: flashing eraseblock 191 -- 17 % complete  [   51.525672]
>>> ------------[ cut here ]------------
>>> [   80.185567] WARNING: CPU: 0 PID: 896 at
>>> /home/poweroasis/bia/build/am43-controller-aquila/tmp/work-shared/am43-controller-aquila/kernel-source/drivers/mtd/nand/nand_base.c:928
>>> nand_wait+0x150/0x174()
>>
>> Not good. Please verify.
>> See the comment above that WARN_ON().
>>
> 
> Try this one:
> http://gofile.io/?id=P2z2Zd

Again file not found. WTF?

Thanks,
//richard