linux-mtd.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: Richard Weinberger <richard@nod.at>
To: Boris Brezillon <boris.brezillon@free-electrons.com>,
	David Woodhouse <dwmw2@infradead.org>,
	Brian Norris <computersforpeace@gmail.com>,
	linux-mtd@lists.infradead.org
Cc: Hans de Goede <hdegoede@redhat.com>,
	linux-kernel@vger.kernel.org, Aleksei Mamlin <mamlinav@gmail.com>
Subject: Re: [PATCH v2 05/15] mtd: nand: add manufacturer specific initialization/detection steps
Date: Sat, 18 Jun 2016 11:23:01 +0200	[thread overview]
Message-ID: <576512F5.7050506@nod.at> (raw)
In-Reply-To: <1465390849-13199-6-git-send-email-boris.brezillon@free-electrons.com>

Boris,

Am 08.06.2016 um 15:00 schrieb Boris Brezillon:
> A lot of NANDs are implementing generic features in a non-generic way,
> or are providing advanced auto-detection logic where the NAND ID bytes
> meaning changes with the NAND generation.
> 
> Providing this vendor specific initialization step will allow us to get
> rid of the full ids in the nand_ids table or all the vendor specific
> cases added over the time in the generic NAND ID decoding logic.
> 
> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
> ---
>  drivers/mtd/nand/nand_base.c | 42 ++++++++++++++++++++++++++++++++----------
>  include/linux/mtd/nand.h     | 36 ++++++++++++++++++++++++++++++++++++
>  2 files changed, 68 insertions(+), 10 deletions(-)
> 
> diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
> index 95e9a8e..0a7d1c6 100644
> --- a/drivers/mtd/nand/nand_base.c
> +++ b/drivers/mtd/nand/nand_base.c
> @@ -3580,7 +3580,7 @@ static int nand_get_bits_per_cell(u8 cellinfo)
>   * chip. The rest of the parameters must be decoded according to generic or
>   * manufacturer-specific "extended ID" decoding patterns.
>   */
> -static void nand_decode_ext_id(struct nand_chip *chip)
> +void nand_decode_ext_id(struct nand_chip *chip)
>  {
>  	struct mtd_info *mtd = nand_to_mtd(chip);
>  	int extid, id_len = chip->id.len;
> @@ -3705,6 +3705,7 @@ static void nand_decode_ext_id(struct nand_chip *chip)
>  
>  	}
>  }
> +EXPORT_SYMBOL_GPL(nand_decode_ext_id);
>  
>  /*
>   * Old devices have chip data hardcoded in the device ID table. nand_decode_id
> @@ -3815,7 +3816,7 @@ static int nand_detect(struct nand_chip *chip, struct nand_flash_dev *type)
>  {
>  	struct mtd_info *mtd = nand_to_mtd(chip);
>  	int busw;
> -	int i, maf_idx;
> +	int i, maf_idx, ret;
>  	u8 *id_data = chip->id.data;
>  	u8 maf_id, dev_id;
>  
> @@ -3856,6 +3857,14 @@ static int nand_detect(struct nand_chip *chip, struct nand_flash_dev *type)
>  
>  	chip->id.len = nand_id_len(id_data, 8);
>  
> +	/* Try to identify manufacturer */
> +	for (maf_idx = 0; nand_manuf_ids[maf_idx].id != 0x0; maf_idx++) {
> +		if (nand_manuf_ids[maf_idx].id == maf_id)
> +			break;
> +	}
> +
> +	chip->manufacturer.ops = nand_manuf_ids[maf_idx].ops;
> +

Instead of checking on every access whether chip->manufacturer.ops is present, just
assign a nop field.
i.e.

diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
index 55f3ab8..aadebe7 100644
--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
@@ -3703,6 +3703,10 @@ static int nand_detect(struct nand_chip *chip, struct nand_flash_dev *type)

 	chip->manufacturer.ops = nand_manuf_ids[maf_idx].ops;

+	if (!chip->manufacturer.ops)
+		/* assign no operations */
+		chip->manufacturer.ops = nand_manuf_ids[0].ops;
+
 	if (!type)
 		type = nand_flash_ids;

diff --git a/drivers/mtd/nand/nand_ids.c b/drivers/mtd/nand/nand_ids.c
index f1476ff..cdd26af 100644
--- a/drivers/mtd/nand/nand_ids.c
+++ b/drivers/mtd/nand/nand_ids.c
@@ -173,6 +173,8 @@ extern const struct nand_manufacturer_ops micron_nand_manuf_ops;
 extern const struct nand_manufacturer_ops amd_nand_manuf_ops;
 extern const struct nand_manufacturer_ops macronix_nand_manuf_ops;

+static const struct nand_manufacturer_ops no_ops;
+
 struct nand_manufacturers nand_manuf_ids[] = {
 	{NAND_MFR_TOSHIBA, "Toshiba", &toshiba_nand_manuf_ops},
 	{NAND_MFR_SAMSUNG, "Samsung", &samsung_nand_manuf_ops},
@@ -188,7 +190,7 @@ struct nand_manufacturers nand_manuf_ids[] = {
 	{NAND_MFR_SANDISK, "SanDisk"},
 	{NAND_MFR_INTEL, "Intel"},
 	{NAND_MFR_ATO, "ATO"},
-	{0x0, "Unknown"}
+	{0x0, "Unknown", &no_ops}
 };

 EXPORT_SYMBOL(nand_manuf_ids);


>  	if (!type)
>  		type = nand_flash_ids;
>  
> @@ -3903,8 +3912,14 @@ static int nand_detect(struct nand_chip *chip, struct nand_flash_dev *type)
>  	chip->chipsize = (uint64_t)type->chipsize << 20;
>  
>  	if (!type->pagesize) {
> -		/* Decode parameters from extended ID */
> -		nand_decode_ext_id(chip);
> +		/*
> +		 * Try manufacturer detection if available and use
> +		 * nand_decode_ext_id() otherwise.
> +		 */
> +		if (chip->manufacturer.ops->detect)

You need to check here for chip->manufacturer.ops first.

Thanks,
//richard

  reply	other threads:[~2016-06-18  9:23 UTC|newest]

Thread overview: 24+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-06-08 13:00 [PATCH v2 00/15] mtd: nand: allow vendor specific detection/initialization Boris Brezillon
2016-06-08 13:00 ` [PATCH v2 01/15] mtd: nand: get rid of the mtd parameter in all auto-detection functions Boris Brezillon
2016-06-08 13:00 ` [PATCH v2 02/15] mtd: nand: store nand ID in struct nand_chip Boris Brezillon
2016-06-08 13:00 ` [PATCH v2 03/15] mtd: nand: get rid of busw parameter Boris Brezillon
2016-06-08 13:00 ` [PATCH v2 04/15] mtd: nand: rename nand_get_flash_type() into nand_detect() Boris Brezillon
2016-06-08 13:00 ` [PATCH v2 05/15] mtd: nand: add manufacturer specific initialization/detection steps Boris Brezillon
2016-06-18  9:23   ` Richard Weinberger [this message]
2016-06-18 11:31     ` Boris Brezillon
2016-06-18 11:40       ` Boris Brezillon
2016-06-18 11:34     ` Boris Brezillon
2016-06-18 12:34       ` Richard Weinberger
2016-06-08 13:00 ` [PATCH v2 06/15] mtd: nand: kill the MTD_NAND_IDS Kconfig option Boris Brezillon
2016-06-08 13:00 ` [PATCH v2 07/15] mtd: nand: move Samsung specific init/detection logic in nand_samsung.c Boris Brezillon
2016-06-08 13:00 ` [PATCH v2 08/15] mtd: nand: move Hynix specific init/detection logic in nand_hynix.c Boris Brezillon
2016-06-08 13:00 ` [PATCH v2 09/15] mtd: nand: move Toshiba specific init/detection logic in nand_toshiba.c Boris Brezillon
2016-06-08 13:00 ` [PATCH v2 10/15] mtd: nand: move Micron specific init logic in nand_micron.c Boris Brezillon
2016-06-08 13:00 ` [PATCH v2 11/15] mtd: nand: move AMD/Spansion specific init/detection logic in nand_amd.c Boris Brezillon
2016-06-08 13:00 ` [PATCH v2 12/15] mtd: nand: move Macronix specific initialization in nand_macronix.c Boris Brezillon
2016-06-08 13:00 ` [PATCH v2 13/15] mtd: nand: samsung: retrieve ECC requirements from extended ID Boris Brezillon
2016-06-08 13:00 ` [PATCH v2 14/15] mtd: nand: hynix: rework NAND ID decoding to extract more information Boris Brezillon
2016-06-08 14:34   ` kbuild test robot
2016-06-08 13:00 ` [PATCH v2 15/15] mtd: nand: hynix: add read-retry support for 1x nm MLC NANDs Boris Brezillon
2016-06-18 22:09 ` [PATCH v2 00/15] mtd: nand: allow vendor specific detection/initialization Richard Weinberger
2016-06-19  8:34   ` Boris Brezillon

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=576512F5.7050506@nod.at \
    --to=richard@nod.at \
    --cc=boris.brezillon@free-electrons.com \
    --cc=computersforpeace@gmail.com \
    --cc=dwmw2@infradead.org \
    --cc=hdegoede@redhat.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mtd@lists.infradead.org \
    --cc=mamlinav@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).