From: Zhihao Cheng <chengzhihao1@huawei.com>
To: "Matthew Wilcox (Oracle)" <willy@infradead.org>,
Richard Weinberger <richard@nod.at>
Cc: <linux-mtd@lists.infradead.org>
Subject: Re: [PATCH 05/15] ubifs: Convert do_writepage() to take a folio
Date: Mon, 22 Jan 2024 19:31:11 +0800 [thread overview]
Message-ID: <5fdb5f71-999e-bd9b-9f85-ecd3ce81ff48@huawei.com> (raw)
In-Reply-To: <20240120230824.2619716-6-willy@infradead.org>
在 2024/1/21 7:08, Matthew Wilcox (Oracle) 写道:
> Replace the call to SetPageError() with a call to mapping_set_error().
> Support large folios by using kmap_local_folio() and remapping each time
> we cross a page boundary. Saves a lot of hidden calls to compound_head().
>
> Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
> ---
> fs/ubifs/file.c | 56 ++++++++++++++++++++++++++-----------------------
> 1 file changed, 30 insertions(+), 26 deletions(-)
>
Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com>
> diff --git a/fs/ubifs/file.c b/fs/ubifs/file.c
> index b297582c9b75..e755d0a11146 100644
> --- a/fs/ubifs/file.c
> +++ b/fs/ubifs/file.c
> @@ -903,60 +903,64 @@ static int ubifs_read_folio(struct file *file, struct folio *folio)
> return 0;
> }
>
> -static int do_writepage(struct page *page, int len)
> +static int do_writepage(struct folio *folio, size_t len)
> {
> - int err = 0, i, blen;
> + int err = 0, blen;
> unsigned int block;
> void *addr;
> + size_t offset = 0;
> union ubifs_key key;
> - struct inode *inode = page->mapping->host;
> + struct inode *inode = folio->mapping->host;
> struct ubifs_info *c = inode->i_sb->s_fs_info;
>
> #ifdef UBIFS_DEBUG
> struct ubifs_inode *ui = ubifs_inode(inode);
> spin_lock(&ui->ui_lock);
> - ubifs_assert(c, page->index <= ui->synced_i_size >> PAGE_SHIFT);
> + ubifs_assert(c, folio->index <= ui->synced_i_size >> PAGE_SHIFT);
> spin_unlock(&ui->ui_lock);
> #endif
>
> - /* Update radix tree tags */
> - set_page_writeback(page);
> + folio_start_writeback(folio);
>
> - addr = kmap(page);
> - block = page->index << UBIFS_BLOCKS_PER_PAGE_SHIFT;
> - i = 0;
> - while (len) {
> - blen = min_t(int, len, UBIFS_BLOCK_SIZE);
> + addr = kmap_local_folio(folio, offset);
> + block = folio->index << UBIFS_BLOCKS_PER_PAGE_SHIFT;
> + for (;;) {
> + blen = min_t(size_t, len, UBIFS_BLOCK_SIZE);
> data_key_init(c, &key, inode->i_ino, block);
> err = ubifs_jnl_write_data(c, inode, &key, addr, blen);
> if (err)
> break;
> - if (++i >= UBIFS_BLOCKS_PER_PAGE)
> + len -= blen;
> + if (!len)
> break;
> block += 1;
> addr += blen;
> - len -= blen;
> + if (folio_test_highmem(folio) && !offset_in_page(addr)) {
> + kunmap_local(addr - blen);
> + offset += PAGE_SIZE;
> + addr = kmap_local_folio(folio, offset);
> + }
> }
> + kunmap_local(addr);
> if (err) {
> - SetPageError(page);
> - ubifs_err(c, "cannot write page %lu of inode %lu, error %d",
> - page->index, inode->i_ino, err);
> + mapping_set_error(folio->mapping, err);
> + ubifs_err(c, "cannot write folio %lu of inode %lu, error %d",
> + folio->index, inode->i_ino, err);
> ubifs_ro_mode(c, err);
> }
>
> - ubifs_assert(c, PagePrivate(page));
> - if (PageChecked(page))
> + ubifs_assert(c, folio->private != NULL);
> + if (folio_test_checked(folio))
> release_new_page_budget(c);
> else
> release_existing_page_budget(c);
>
> atomic_long_dec(&c->dirty_pg_cnt);
> - detach_page_private(page);
> - ClearPageChecked(page);
> + folio_detach_private(folio);
> + folio_clear_checked(folio);
>
> - kunmap(page);
> - unlock_page(page);
> - end_page_writeback(page);
> + folio_unlock(folio);
> + folio_end_writeback(folio);
> return err;
> }
>
> @@ -1044,7 +1048,7 @@ static int ubifs_writepage(struct folio *folio, struct writeback_control *wbc,
> * with this.
> */
> }
> - return do_writepage(&folio->page, len);
> + return do_writepage(folio, len);
> }
>
> /*
> @@ -1063,7 +1067,7 @@ static int ubifs_writepage(struct folio *folio, struct writeback_control *wbc,
> goto out_redirty;
> }
>
> - return do_writepage(&folio->page, len);
> + return do_writepage(folio, len);
> out_redirty:
> /*
> * folio_redirty_for_writepage() won't call ubifs_dirty_inode() because
> @@ -1177,7 +1181,7 @@ static int do_truncation(struct ubifs_info *c, struct inode *inode,
> if (UBIFS_BLOCKS_PER_PAGE_SHIFT)
> offset = offset_in_folio(folio,
> new_size);
> - err = do_writepage(&folio->page, offset);
> + err = do_writepage(folio, offset);
> folio_put(folio);
> if (err)
> goto out_budg;
>
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
next prev parent reply other threads:[~2024-01-22 11:31 UTC|newest]
Thread overview: 44+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-01-20 23:08 [PATCH 00/15] ubifs folio conversion Matthew Wilcox (Oracle)
2024-01-20 23:08 ` [PATCH 01/15] ubifs: Set page uptodate in the correct place Matthew Wilcox (Oracle)
2024-01-22 7:22 ` Zhihao Cheng
2024-01-22 14:40 ` Matthew Wilcox
2024-01-23 2:36 ` Zhihao Cheng
2024-01-24 5:01 ` Matthew Wilcox
2024-01-20 23:08 ` [PATCH 02/15] ubifs: Convert from writepage to writepages Matthew Wilcox (Oracle)
2024-01-22 11:31 ` Zhihao Cheng
2024-01-20 23:08 ` [PATCH 03/15] ubifs: Convert ubifs_writepage to use a folio Matthew Wilcox (Oracle)
2024-01-22 9:27 ` Zhihao Cheng
2024-01-20 23:08 ` [PATCH 04/15] ubifs: Use a folio in do_truncation() Matthew Wilcox (Oracle)
2024-01-22 9:31 ` Zhihao Cheng
2024-01-20 23:08 ` [PATCH 05/15] ubifs: Convert do_writepage() to take a folio Matthew Wilcox (Oracle)
2024-01-22 11:31 ` Zhihao Cheng [this message]
2024-01-20 23:08 ` [PATCH 06/15] ubifs: Convert ubifs_vm_page_mkwrite() to use " Matthew Wilcox (Oracle)
2024-01-22 11:38 ` Zhihao Cheng
2024-01-20 23:08 ` [PATCH 07/15] ubifs: Convert write_begin_slow() " Matthew Wilcox (Oracle)
2024-01-20 23:08 ` [PATCH 08/15] ubifs: Convert ubifs_write_begin() " Matthew Wilcox (Oracle)
2024-01-22 11:51 ` Zhihao Cheng
2024-01-22 14:43 ` Matthew Wilcox
2024-01-23 2:15 ` Zhihao Cheng
2024-01-23 3:07 ` Matthew Wilcox
2024-01-23 4:27 ` Zhihao Cheng
2024-01-23 4:27 ` Zhihao Cheng
2024-01-20 23:08 ` [PATCH 09/15] ubifs: Convert ubifs_write_end() " Matthew Wilcox (Oracle)
2024-01-23 4:39 ` Zhihao Cheng
2024-01-20 23:08 ` [PATCH 10/15] ubifs: Convert do_readpage() to take " Matthew Wilcox (Oracle)
2024-01-22 12:09 ` Zhihao Cheng
2024-01-20 23:08 ` [PATCH 11/15] ubifs: Convert allocate_budget() to work on " Matthew Wilcox (Oracle)
2024-01-22 11:52 ` Zhihao Cheng
2024-01-20 23:08 ` [PATCH 12/15] ubifs: Convert cancel_budget() to take " Matthew Wilcox (Oracle)
2024-01-22 12:14 ` Zhihao Cheng
2024-01-20 23:08 ` [PATCH 13/15] ubifs: Pass a folio into ubifs_bulk_read() and ubifs_do_bulk_read() Matthew Wilcox (Oracle)
2024-01-22 12:15 ` Zhihao Cheng
2024-01-20 23:08 ` [PATCH 14/15] ubifs: Use a folio in ubifs_do_bulk_read() Matthew Wilcox (Oracle)
2024-01-22 12:17 ` Zhihao Cheng
2024-01-20 23:08 ` [PATCH 15/15] ubifs: Convert populate_page() to take a folio Matthew Wilcox (Oracle)
2024-01-22 12:22 ` Zhihao Cheng
2024-01-23 7:33 ` [PATCH 00/15] ubifs folio conversion Richard Weinberger
2024-01-24 5:01 ` Matthew Wilcox
2024-01-25 2:05 ` Zhihao Cheng
2024-02-15 20:46 ` Matthew Wilcox
2024-02-15 20:54 ` Richard Weinberger
2024-02-25 22:13 ` Richard Weinberger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5fdb5f71-999e-bd9b-9f85-ecd3ce81ff48@huawei.com \
--to=chengzhihao1@huawei.com \
--cc=linux-mtd@lists.infradead.org \
--cc=richard@nod.at \
--cc=willy@infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox