From: Christian Marangi <ansuelsmth@gmail.com>
To: Michael Walle <mwalle@kernel.org>
Cc: Tudor Ambarus <tudor.ambarus@linaro.org>,
Pratyush Yadav <pratyush@kernel.org>,
Miquel Raynal <miquel.raynal@bootlin.com>,
Richard Weinberger <richard@nod.at>,
Vignesh Raghavendra <vigneshr@ti.com>,
linux-kernel@vger.kernel.org, linux-mtd@lists.infradead.org,
David Bauer <mail@david-bauer.net>
Subject: Re: [PATCH] mtd: spi-nor: Add support for BoHong bh25q128as
Date: Mon, 19 Feb 2024 22:56:30 +0100 [thread overview]
Message-ID: <65d3ce8f.050a0220.e5faf.c252@mx.google.com> (raw)
In-Reply-To: <CZ8X218EWPC9.25TO9O5C7VXQ9@kernel.org>
On Mon, Feb 19, 2024 at 09:35:27AM +0100, Michael Walle wrote:
> Hi,
>
> On Sat Feb 17, 2024 at 1:20 PM CET, Christian Marangi wrote:
> > From: David Bauer <mail@david-bauer.net>
> >
> > Add MTD support for the BoHong bh25q128as SPI NOR chip.
> > The chip has 16MB of total capacity, divided into a total of 256
> > sectors, each 64KB sized. The chip also supports 4KB sectors.
> > Additionally, it supports dual and quad read modes.
> >
> > Datasheet is public and can be found here [1].
>
> Last time it wasn't clear if this flash will support SFDP or not.
> Could you please try to dump the SFDP again, see [1].
>
Ok will include in v2.
>
> > Functionality was verified on an Tenbay WR1800K / MTK MT7621 board.
>
> Also per [1], you'd need to provide your test results.
>
> > [1] https://www.e-interlink.com.tw/userUpload/files/BH25Q128AS_v1_0.pdf
>
> Link: right above your SoB please.
>
> > Signed-off-by: David Bauer <mail@david-bauer.net>
> > [ reworked to new flash_info format ]
> > Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
> > ---
> > drivers/mtd/spi-nor/Makefile | 1 +
> > drivers/mtd/spi-nor/bohong.c | 24 ++++++++++++++++++++++++
> > drivers/mtd/spi-nor/core.c | 1 +
> > drivers/mtd/spi-nor/core.h | 1 +
> > 4 files changed, 27 insertions(+)
> > create mode 100644 drivers/mtd/spi-nor/bohong.c
> >
> > diff --git a/drivers/mtd/spi-nor/Makefile b/drivers/mtd/spi-nor/Makefile
> > index 5e68468b72fc..c8849cf5124f 100644
> > --- a/drivers/mtd/spi-nor/Makefile
> > +++ b/drivers/mtd/spi-nor/Makefile
> > @@ -2,6 +2,7 @@
> >
> > spi-nor-objs := core.o sfdp.o swp.o otp.o sysfs.o
> > spi-nor-objs += atmel.o
> > +spi-nor-objs += bohong.o
> > spi-nor-objs += eon.o
> > spi-nor-objs += esmt.o
> > spi-nor-objs += everspin.o
> > diff --git a/drivers/mtd/spi-nor/bohong.c b/drivers/mtd/spi-nor/bohong.c
> > new file mode 100644
> > index 000000000000..26988c139262
> > --- /dev/null
> > +++ b/drivers/mtd/spi-nor/bohong.c
> > @@ -0,0 +1,24 @@
> > +// SPDX-License-Identifier: GPL-2.0
> > +/*
> > + * Copyright (C) 2005, Intec Automation Inc.
> > + * Copyright (C) 2014, Freescale Semiconductor, Inc.
>
> Please remove, there is nothing from the old code left here.
>
> > + */
> > +
> > +#include <linux/mtd/spi-nor.h>
> > +
> > +#include "core.h"
> > +
> > +static const struct flash_info bohong_parts[] = {
> > + {
> > + .id = SNOR_ID(0x68, 0x40, 0x18),
> > + .name = "bh25q128as",
> No names anymore, please.
>
Mhhh why this change? Doesn't this makes the thing problematic to
identify?
> > + .size = SZ_16M,
> > + .no_sfdp_flags = SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ,
> > + },
> > +};
> > +
> > +const struct spi_nor_manufacturer spi_nor_bohong = {
> > + .name = "bohong",
>
> This should be dropped, too. Otherwise looks good, if SFDP is not
> supported.
>
Ok, thanks a lot for the review!
>
> [1] https://docs.kernel.org/driver-api/mtd/spi-nor.html
>
> > + .parts = bohong_parts,
> > + .nparts = ARRAY_SIZE(bohong_parts),
> > +};
> > diff --git a/drivers/mtd/spi-nor/core.c b/drivers/mtd/spi-nor/core.c
> > index 4129764fad8c..29c28ee683a1 100644
> > --- a/drivers/mtd/spi-nor/core.c
> > +++ b/drivers/mtd/spi-nor/core.c
> > @@ -2037,6 +2037,7 @@ int spi_nor_sr2_bit7_quad_enable(struct spi_nor *nor)
> >
> > static const struct spi_nor_manufacturer *manufacturers[] = {
> > &spi_nor_atmel,
> > + &spi_nor_bohong,
> > &spi_nor_eon,
> > &spi_nor_esmt,
> > &spi_nor_everspin,
> > diff --git a/drivers/mtd/spi-nor/core.h b/drivers/mtd/spi-nor/core.h
> > index d36c0e072954..c293568ae827 100644
> > --- a/drivers/mtd/spi-nor/core.h
> > +++ b/drivers/mtd/spi-nor/core.h
> > @@ -601,6 +601,7 @@ struct sfdp {
> >
> > /* Manufacturer drivers. */
> > extern const struct spi_nor_manufacturer spi_nor_atmel;
> > +extern const struct spi_nor_manufacturer spi_nor_bohong;
> > extern const struct spi_nor_manufacturer spi_nor_eon;
> > extern const struct spi_nor_manufacturer spi_nor_esmt;
> > extern const struct spi_nor_manufacturer spi_nor_everspin;
>
--
Ansuel
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
next prev parent reply other threads:[~2024-02-19 21:56 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-02-17 12:20 [PATCH] mtd: spi-nor: Add support for BoHong bh25q128as Christian Marangi
2024-02-19 8:35 ` Michael Walle
2024-02-19 21:56 ` Christian Marangi [this message]
-- strict thread matches above, loose matches on Subject: below --
2021-05-09 14:47 David Bauer
2021-05-10 8:00 ` Michael Walle
2021-05-10 9:28 ` David Bauer
2021-05-10 9:35 ` Michael Walle
2021-05-10 10:27 ` David Bauer
2021-05-10 10:56 ` Michael Walle
2021-05-10 11:04 ` David Bauer
2021-05-10 11:22 ` Michael Walle
2021-05-18 19:39 ` David Bauer
2021-06-28 5:48 ` Tudor.Ambarus
2021-07-02 14:03 ` Tudor.Ambarus
2021-07-03 15:58 ` George Brooke
2021-07-03 16:20 ` Michael Walle
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=65d3ce8f.050a0220.e5faf.c252@mx.google.com \
--to=ansuelsmth@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mtd@lists.infradead.org \
--cc=mail@david-bauer.net \
--cc=miquel.raynal@bootlin.com \
--cc=mwalle@kernel.org \
--cc=pratyush@kernel.org \
--cc=richard@nod.at \
--cc=tudor.ambarus@linaro.org \
--cc=vigneshr@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox