* async page mode flash support?
@ 2008-09-12 19:32 Brian Kuschak
0 siblings, 0 replies; only message in thread
From: Brian Kuschak @ 2008-09-12 19:32 UTC (permalink / raw)
To: linux-mtd
Do the current CFI physmap flash drivers (2.6.18+) support NOR flash configured to operate in async page mode?
When I enable async page mode access in the memory controller, the CFI probe fails. I can verify on a logic analyzer and BDI-2000 that the CPU is doing an 8-word (16 byte) burst read from the flash. My bootrom and BDI-2K verify that the data is in fact transferred properly (csums match in regular and page-mode reads). However, linux fails the cfi probe. It looks like the CFI query commands are in fact sent as single-word cycles, not burst mode. (This is as it should be).
Anyone else successful using page-mode flash?
Thx,
Brian
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2008-09-12 19:33 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2008-09-12 19:32 async page mode flash support? Brian Kuschak
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox