public inbox for linux-mtd@lists.infradead.org
 help / color / mirror / Atom feed
From: Simon Haynes <simon@baydel.com>
To: David Woodhouse <dwmw2@infradead.org>
Cc: linux-mtd@lists.infradead.org
Subject: Re: JFFS2 Corruption.
Date: Tue, 24 Feb 2004 17:05:03 +0000	[thread overview]
Message-ID: <6A03D4BC2018@baydel.com> (raw)
In-Reply-To: <1077641461.7826.578.camel@hades.cambridge.redhat.com>

On Tuesday 24 Feb 2004 4:51 pm, David Woodhouse wrote:
> Hack JFFS2 to always get_mtd_device number 2 and boot with
> root=/dev/ram0

Sorry again for being so stupid. I know you have only told me half a dozen 
times that JFFS2 does not use the block read and write routines.

I have done this and rebooted several times. Normally I would expect a CRC 
error within a couple or reboots. As yet I have no CRC errors but I do get a 
large number of "Empty Flash" messages, about 15 per reboot. I do not see any 
of these if I boot via the network and mount and dismount the smc ?

I will keep rebooting over night and hack the kernel to panic on a CRC error.

Would you recommend changing the printk for the "Empty Flash" messages to a 
different level and using the ramdisk as a permanent solution ?

  reply	other threads:[~2004-02-24 17:46 UTC|newest]

Thread overview: 38+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2004-02-19 16:48 JFFS2 Corruption simon
2004-02-23 11:07 ` simon
2004-02-24  9:48   ` simon
2004-02-24 12:00     ` David Woodhouse
2004-02-24 12:54       ` Simon Haynes
2004-02-24 13:04       ` Simon Haynes
2004-02-24 13:40         ` Simon Haynes
2004-02-24 14:22           ` David Woodhouse
2004-02-24 14:25             ` Simon Haynes
2004-02-24 14:56               ` David Woodhouse
2004-02-24 14:58                 ` Simon Haynes
2004-02-24 15:35                   ` David Woodhouse
2004-02-24 15:47                     ` Simon Haynes
2004-02-24 16:14                       ` David Woodhouse
2004-02-24 16:17                         ` Simon Haynes
2004-02-24 16:51                           ` David Woodhouse
2004-02-24 17:05                             ` Simon Haynes [this message]
2004-02-24 18:05                               ` David Woodhouse
2004-02-24 18:04                                 ` Simon Haynes
2004-02-25  9:49                                 ` simon
2004-02-25 10:25                                   ` David Woodhouse
2004-02-26 11:08                                     ` Simon Haynes
2004-02-26 11:55                                       ` David Woodhouse
2004-03-03 15:31                                       ` David Woodhouse
2004-03-08 15:10                                         ` Simon Haynes
2004-03-09 15:33                                           ` Simon Haynes
2004-03-16 16:14                                             ` David Woodhouse
2004-03-19 10:37                                               ` Simon Haynes
2004-03-19 11:11                                                 ` David Woodhouse
2004-02-24 17:12                             ` Simon Haynes
2004-02-24 16:55                           ` David Woodhouse
  -- strict thread matches above, loose matches on Subject: below --
2004-02-05 13:15 JFFS2 corruption Florian Schirmer
2004-02-08 10:37 ` David Woodhouse
2004-02-08 11:38   ` Florian Schirmer
2004-02-08 11:53     ` David Woodhouse
2004-02-08 17:02       ` Florian Schirmer
2004-02-08 17:13         ` David Woodhouse
2004-02-08 11:28 ` David Woodhouse

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=6A03D4BC2018@baydel.com \
    --to=simon@baydel.com \
    --cc=dwmw2@infradead.org \
    --cc=linux-mtd@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox