From: simon polette <spolette@gmail.com>
To: linux-mtd@lists.infradead.org
Subject: Ubiattach problem after flashing an image
Date: Thu, 2 Apr 2009 15:58:56 +0200 [thread overview]
Message-ID: <72795ccb0904020658s35f8fd6aw97798be53ed7d559@mail.gmail.com> (raw)
Hi,
I'm using the last mtd utils version provided by the git mtd
repository. I want to flash an ubi image built with mkfs.ubfis and
ubinize into a Nand flash. Once the nand is flashed, when I try to
attach ubi, I get this error :
# ubiattach /dev/ubi_ctrl -m 2
[ 968.980000] UBI: attaching mtd2 to ubi1
[ 969.000000] UBI: physical eraseblock size: 131072 bytes (128 KiB)
[ 969.030000] UBI: logical eraseblock size: 129024 bytes
[ 969.050000] UBI: smallest flash I/O unit: 2048
[ 969.060000] UBI: sub-page size: 512
[ 969.080000] UBI: VID header offset: 512 (aligned 512)
[ 969.100000] UBI: data offset: 2048
[ 969.330000] UBI error: vtbl_check: volume table check failed:
record 1, error 9
ubiattach: error!: cannot attach mtd2
error 22 (Invalid argument)
The ubi image I use is ok because I already successfully flashed it
and used it with this hardware. This error appeared since I upgraded
both mtd utils and Linux kernel, but even if come back to the previous
versions I was used to work with, this error persist. I think I'm
doing something wrong, but don't know where at all.
Any idea is welcome.
Best regards,
Simon Polette
next reply other threads:[~2009-04-02 13:59 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-04-02 13:58 simon polette [this message]
2009-04-03 7:09 ` Ubiattach problem after flashing an image Artem Bityutskiy
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=72795ccb0904020658s35f8fd6aw97798be53ed7d559@mail.gmail.com \
--to=spolette@gmail.com \
--cc=linux-mtd@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox