From: Tokunori Ikegami <ikegami.t@gmail.com>
To: Miquel Raynal <miquel.raynal@bootlin.com>
Cc: linux-mtd@lists.infradead.org,
Richard Weinberger <richard@nod.at>,
Vignesh Raghavendra <vigneshr@ti.com>
Subject: Re: [PATCH v3 1/3] mtd: cfi_cmdset_0002: Add S29GL064N ID definition
Date: Thu, 17 Mar 2022 00:56:41 +0900 [thread overview]
Message-ID: <7d0718b0-d6a8-4e2d-4e1a-b149ea929e60@gmail.com> (raw)
In-Reply-To: <20220315193740.23284a20@xps13>
Hi,
On 2022/03/16 3:37, Miquel Raynal wrote:
> Hi Tokunori,
>
> ikegami.t@gmail.com wrote on Wed, 16 Mar 2022 01:56:05 +0900:
>
>> It is for the model number 01, 02, V1 and V2.
> Please move this change to the end of the series. We do not need to
> backport this improvement.
>
> Also use the hexadecimal value in your fix (patch 3/3) so that we can
> apply it easily to older kernels.
Fixed by the version 4 patches.
Regards,
Ikegami
>
>> Signed-off-by: Tokunori Ikegami <ikegami.t@gmail.com>
>> Cc: Miquel Raynal <miquel.raynal@bootlin.com>
>> Cc: Richard Weinberger <richard@nod.at>
>> Cc: Vignesh Raghavendra <vigneshr@ti.com>
>> Cc: linux-mtd@lists.infradead.org
>> ---
>> drivers/mtd/chips/cfi_cmdset_0002.c | 3 ++-
>> 1 file changed, 2 insertions(+), 1 deletion(-)
>>
>> diff --git a/drivers/mtd/chips/cfi_cmdset_0002.c b/drivers/mtd/chips/cfi_cmdset_0002.c
>> index a761134fd3be..0125658a1d30 100644
>> --- a/drivers/mtd/chips/cfi_cmdset_0002.c
>> +++ b/drivers/mtd/chips/cfi_cmdset_0002.c
>> @@ -48,6 +48,7 @@
>> #define SST49LF040B 0x0050
>> #define SST49LF008A 0x005a
>> #define AT49BV6416 0x00d6
>> +#define S29GL064N_MN12 0x0c01
>>
>> /*
>> * Status Register bit description. Used by flash devices that don't
>> @@ -462,7 +463,7 @@ static struct cfi_fixup cfi_fixup_table[] = {
>> { CFI_MFR_AMD, 0x0056, fixup_use_secsi },
>> { CFI_MFR_AMD, 0x005C, fixup_use_secsi },
>> { CFI_MFR_AMD, 0x005F, fixup_use_secsi },
>> - { CFI_MFR_AMD, 0x0c01, fixup_s29gl064n_sectors },
>> + { CFI_MFR_AMD, S29GL064N_MN12, fixup_s29gl064n_sectors },
>> { CFI_MFR_AMD, 0x1301, fixup_s29gl064n_sectors },
>> { CFI_MFR_AMD, 0x1a00, fixup_s29gl032n_sectors },
>> { CFI_MFR_AMD, 0x1a01, fixup_s29gl032n_sectors },
>
> Thanks,
> Miquèl
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
next prev parent reply other threads:[~2022-03-16 15:57 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-03-15 16:56 [PATCH v3 0/3] mtd: cfi_cmdset_0002: Use chip_ready() for write on S29GL064N Tokunori Ikegami
2022-03-15 16:56 ` [PATCH v3 1/3] mtd: cfi_cmdset_0002: Add S29GL064N ID definition Tokunori Ikegami
2022-03-15 18:37 ` Miquel Raynal
2022-03-16 15:56 ` Tokunori Ikegami [this message]
2022-03-15 16:56 ` [PATCH v3 2/3] mtd: cfi_cmdset_0002: Move and rename chip_check/chip_ready/chip_good_for_write Tokunori Ikegami
2022-03-15 18:44 ` Miquel Raynal
2022-03-16 16:04 ` Tokunori Ikegami
2022-03-15 16:56 ` [PATCH v3 3/3] mtd: cfi_cmdset_0002: Use chip_ready() for write on S29GL064N Tokunori Ikegami
2022-03-15 18:51 ` Miquel Raynal
2022-03-16 16:05 ` Tokunori Ikegami
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=7d0718b0-d6a8-4e2d-4e1a-b149ea929e60@gmail.com \
--to=ikegami.t@gmail.com \
--cc=linux-mtd@lists.infradead.org \
--cc=miquel.raynal@bootlin.com \
--cc=richard@nod.at \
--cc=vigneshr@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox