From mboxrd@z Thu Jan 1 00:00:00 1970 Received: from [61.135.145.13] (helo=websmtp03.sohu.com) by pentafluge.infradead.org with esmtp (Exim 3.22 #1 (Red Hat Linux)) id 17cMUH-0000ay-00 for ; Wed, 07 Aug 2002 09:48:14 +0100 Received: from mail.sohu.com (unknown [192.168.41.41]) by websmtp03.sohu.com (Postfix) with ESMTP id 0AB23672C6 for ; Wed, 7 Aug 2002 16:37:30 +0800 (CST) Message-ID: <871203.1028710084678.JavaMail.postfix@mailsrv1.mail.sohu.com> Date: Wed, 7 Aug 2002 16:48:04 +0800 (CST) From: To: linux-mtd@lists.infradead.org Subject: problem at boot from doc2000-with grub Mime-Version: 1.0 Content-Type: text/plain; charset="GB2312" Content-Transfer-Encoding: 8bit Sender: linux-mtd-admin@lists.infradead.org Errors-To: linux-mtd-admin@lists.infradead.org List-Help: List-Post: List-Subscribe: , List-Id: Linux MTD discussion mailing list List-Unsubscribe: , List-Archive: hi I have managed to compile the kernel and the grub, now I can read/write the doc2000 and I also get the grub_firmware which is about 89664 bytes, but still I cannot make the doc boot itself up. Although a previous good how to tell me to doc_loadbios /dev/mtd0 grub_firmware, but I find the doc_firmware space is only about 49k bytes, this 88k one can not inserted into it. I've tried to use dformat5.1 /BDKL0:90k to change the firmware space but I met the old !=1 preblem, but dformat4.2 seems doesn't support the parameter, what shall I do then? I am using a doc-2000 in a pc104 SBC with phoenix bios. thans jay