From: Konstantin Kletschke <lists@ku-gbr.de>
To: "Artem B. Bityutskiy" <dedekind@yandex.ru>
Cc: linux-mtd@lists.infradead.org
Subject: Re: Inode #274 was a directory with children - removing those too...
Date: Wed, 28 Sep 2005 13:54:50 +0200 [thread overview]
Message-ID: <877jd176gl.wl%kletschke@synertronixx.de> (raw)
In-Reply-To: <878xxh77zp.wl%kletschke@synertronixx.de>
[-- Attachment #1: Type: text/plain, Size: 2660 bytes --]
At Wed, 28 Sep 2005 13:21:46 +0200,
Konstantin Kletschke <lists@ku-gbr.de> wrote:
> It happens on a virgin created image. After that on every mount.
> The partition is used as /.
I did some further debugging:
konsti@synertronixx3:/usr/src/buildroot$ ls -laR
build_arm/root/etc/network/
build_arm/root/etc/network/:
total 8
drwxr-xr-x 3 konsti konsti 41 2005-09-28 09:51 .
drwxr-xr-x 4 konsti konsti 4096 2005-09-28 09:51 ..
drwxrwxr-x 2 konsti konsti 33 2005-08-26 15:42 if-pre-up.d
-rw-r--r-- 1 konsti konsti 1618 2005-09-28 11:09 interfaces
build_arm/root/etc/network/if-pre-up.d:
total 8
drwxrwxr-x 2 konsti konsti 33 2005-08-26 15:42 .
drwxr-xr-x 3 konsti konsti 41 2005-09-28 09:51 ..
-rwxr-xr-x 1 konsti konsti 6027 2005-08-26 15:42 linux-wlan-ng-pre-up
Then:
/usr/src/buildroot/toolchain_build_arm/mtd-20050122.orig/util/mkfs.jffs2\
-e 0x20000 -l \
-d /usr/src/buildroot/build_arm/root \
-o /usr/src/buildroot/root_fs_arm.jffs2 \
-D target/scb9328/device_table.txt
On Target:
# ls -laR /etc/network/
/etc/network/:
drwxr-xr-x 6 default default 0 Sep 28 2005 .
drwxr-xr-x 5 default default 0 Jan 1 00:00 ..
drwxr-xr-x 2 root root 0 Sep 28 2005 if-down.d
drwxr-xr-x 2 root root 0 Sep 28 2005 if-post-down.d
drwxr-xr-x 2 root root 0 Aug 26 2005 if-pre-up.d
drwxr-xr-x 2 root root 0 Sep 28 2005 if-up.d
-rw-r--r-- 1 default default 1618 Sep 28 2005 interfaces
/etc/network/if-down.d:
drwxr-xr-x 2 root root 0 Sep 28 2005 .
drwxr-xr-x 6 default default 0 Sep 28 2005 ..
/etc/network/if-post-down.d:
drwxr-xr-x 2 root root 0 Sep 28 2005 .
drwxr-xr-x 6 default default 0 Sep 28 2005 ..
/etc/network/if-pre-up.d:
drwxr-xr-x 2 root root 0 Aug 26 2005 .
drwxr-xr-x 6 default default 0 Sep 28 2005 ..
/etc/network/if-up.d:
drwxr-xr-x 2 root root 0 Sep 28 2005 .
drwxr-xr-x 6 default default 0 Sep 28 2005 ..
#
With this devicetable:
/etc/network/if-up.d d 755 0 0
- - - - -
/etc/network/if-pre-up.d d 755 0 0
- - - - -
/etc/network/if-down.d d 755 0 0
- - - - -
/etc/network/if-post-down.d d 755 0 0
- - - - -
I attach jffs2dump because I am not able to convince emacs to not
linebreak it, it looks unuseable broken at 72 chars.
Konsti
[-- Attachment #2: less --]
[-- Type: application/octet-stream, Size: 5520 bytes --]
Inode node at 0x0007e42c, totlen 0x00000799, #ino 266, version 1, isize 10873, csize 1877, dsize 4096, offset 0
Inode node at 0x0007ebc8, totlen 0x0000073e, #ino 266, version 2, isize 10873, csize 1786, dsize 4096, offset 4096
Inode node at 0x0007f308, totlen 0x000003f3, #ino 266, version 3, isize 10873, csize 943, dsize 2681, offset 8192
Dirent node at 0x0007f6fc, totlen 0x0000002e, #pino 4, version 265, #ino 267, nsize 6, name shadow
Inode node at 0x0007f72c, totlen 0x000000b3, #ino 267, version 1, isize 321, csize 111, dsize 321, offset 0
Dirent node at 0x0007f7e0, totlen 0x0000002e, #pino 4, version 266, #ino 268, nsize 6, name shadow
Inode node at 0x0007f810, totlen 0x000000b3, #ino 268, version 1, isize 321, csize 111, dsize 321, offset 0
Dirent node at 0x0007f8c4, totlen 0x0000002e, #pino 4, version 267, #ino 269, nsize 6, name passwd
Inode node at 0x0007f8f4, totlen 0x00000137, #ino 269, version 1, isize 489, csize 243, dsize 489, offset 0
Dirent node at 0x0007fa2c, totlen 0x00000032, #pino 254, version 268, #ino 270, nsize 10, name S20urandom
Inode node at 0x0007fa60, totlen 0x00000270, #ino 270, version 1, isize 1108, csize 556, dsize 1108, offset 0
Dirent node at 0x0007fcd0, totlen 0x00000032, #pino 254, version 269, #ino 271, nsize 10, name S40network
Inode node at 0x0007fd04, totlen 0x00000112, #ino 271, version 1, isize 340, csize 206, dsize 340, offset 0
Dirent node at 0x0007fe18, totlen 0x00000033, #pino 254, version 270, #ino 272, nsize 11, name S50dropbear
Inode node at 0x0007fe4c, totlen 0x000001af, #ino 272, version 1, isize 1007, csize 363, dsize 734, offset 0
Inode node at 0x0008000c, totlen 0x00000104, #ino 272, version 2, isize 1007, csize 192, dsize 273, offset 734
Dirent node at 0x00080110, totlen 0x0000002b, #pino 254, version 271, #ino 273, nsize 3, name rcS
Inode node at 0x0008013c, totlen 0x0000015c, #ino 273, version 1, isize 408, csize 280, dsize 408, offset 0
Dirent node at 0x00080298, totlen 0x00000033, #pino 259, version 272, #ino 274, nsize 11, name if-pre-up.d
Inode node at 0x000802cc, totlen 0x00000044, #ino 274, version 1, isize 0, csize 0, dsize 0, offset 0
Dirent node at 0x00080310, totlen 0x00000032, #pino 259, version 273, #ino 275, nsize 10, name interfaces
Inode node at 0x00080344, totlen 0x0000034a, #ino 275, version 1, isize 1618, csize 774, dsize 1618, offset 0
Dirent node at 0x00080690, totlen 0x0000002f, #pino 259, version 274, #ino 276, nsize 7, name if-up.d
Inode node at 0x000806c0, totlen 0x00000044, #ino 276, version 1, isize 0, csize 0, dsize 0, offset 0
Dirent node at 0x00080704, totlen 0x00000033, #pino 259, version 275, #ino 277, nsize 11, name if-pre-up.d
Inode node at 0x00080738, totlen 0x00000044, #ino 277, version 1, isize 0, csize 0, dsize 0, offset 0
Dirent node at 0x0008077c, totlen 0x00000031, #pino 259, version 276, #ino 278, nsize 9, name if-down.d
Inode node at 0x000807b0, totlen 0x00000044, #ino 278, version 1, isize 0, csize 0, dsize 0, offset 0
Dirent node at 0x000807f4, totlen 0x00000036, #pino 259, version 277, #ino 279, nsize 14, name if-post-down.d
Inode node at 0x0008082c, totlen 0x00000044, #ino 279, version 1, isize 0, csize 0, dsize 0, offset 0
Dirent node at 0x00080870, totlen 0x0000003c, #pino 274, version 278, #ino 280, nsize 20, name linux-wlan-ng-pre-up
Inode node at 0x000808ac, totlen 0x0000065b, #ino 280, version 1, isize 6027, csize 1559, dsize 4096, offset 0
Inode node at 0x00080f08, totlen 0x000002e8, #ino 280, version 2, isize 6027, csize 676, dsize 1931, offset 4096
Dirent node at 0x000811f0, totlen 0x0000002f, #pino 5, version 279, #ino 281, nsize 7, name default
Inode node at 0x00081220, totlen 0x00000044, #ino 281, version 1, isize 0, csize 0, dsize 0, offset 0
Dirent node at 0x00081264, totlen 0x0000003b, #pino 6, version 280, #ino 282, nsize 19, name ld-uClibc-0.9.27.so
Inode node at 0x000812a0, totlen 0x000008b1, #ino 282, version 1, isize 19452, csize 2157, dsize 4096, offset 0
Inode node at 0x00081b54, totlen 0x00000a7e, #ino 282, version 2, isize 19452, csize 2618, dsize 4096, offset 4096
[-- Attachment #3: Type: text/plain, Size: 90 bytes --]
--
GPG KeyID EF62FCEF
Fingerprint: 13C9 B16B 9844 EC15 CC2E A080 1E69 3FDA EF62 FCEF
prev parent reply other threads:[~2005-09-28 11:55 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-09-28 10:38 Inode #274 was a directory with children - removing those too Konstantin Kletschke
2005-09-28 10:50 ` Artem B. Bityutskiy
2005-09-28 11:21 ` Konstantin Kletschke
2005-09-28 11:36 ` Artem B. Bityutskiy
2005-09-28 11:55 ` Konstantin Kletschke
2005-09-28 11:54 ` Konstantin Kletschke [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=877jd176gl.wl%kletschke@synertronixx.de \
--to=lists@ku-gbr.de \
--cc=dedekind@yandex.ru \
--cc=linux-mtd@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox