From: NeilBrown <neil@brown.name>
To: David Woodhouse <dwmw2@infradead.org>,
Brian Norris <computersforpeace@gmail.com>,
Boris Brezillon <boris.brezillon@bootlin.com>,
Marek Vasut <marek.vasut@gmail.com>,
Richard Weinberger <richard@nod.at>
Cc: linux-mtd@lists.infradead.org , linux-kernel@vger.kernel.org
Subject: [PATCH/RFC] mtd: spi-nor: honour max_message_size for spi-nor writes.
Date: Fri, 27 Apr 2018 16:18:05 +1000 [thread overview]
Message-ID: <87efj1kw9u.fsf@notabene.neil.brown.name> (raw)
[-- Attachment #1: Type: text/plain, Size: 2603 bytes --]
Hi,
I've labeled this an RFC because I'm really not sure about removing the
error path from spi_nor_write() -- maybe that really matters. But on
my hardware, performing multiple small spi writes to the flash seems
to work.
The spi driver is drivers/staging/mt7621-spi. Possibly this needs to
use DMA instead of a FIFO (assuming the hardware can) - or maybe
drivers/spi/spi-mt65xx.c can be made to work on this hardware, though
that is for an ARM SOC and mt7621 is a MIPS SOC.
I note that openwrt has similar patches:
target/linux/generic/pending-4.14/450-mtd-spi-nor-allow-NOR-driver-to-write-fewer-bytes-th.patch
They also change the spi driver to do a short write, rather
than change m25p80 to request a short write.
Is there something horribly wrong with this?
Thanks,
NeilBrown
-----------------------8<------------------------
m25p80 honours max_message_size and max_transfer_size
for reads, but not for writes.
I have a driver that has a max message size of 36 bytes
(command, address, 32 bytes data, all places in a FIFO
in the controller).
This requires m25p80_write() to honour the size limits.
For that to work, spi-nor needs to quietly accept partial
writes.
With this, I can successfully re-flash my device.
Signed-off-by: NeilBrown <neil@brown.name>
---
drivers/mtd/devices/m25p80.c | 3 ++-
drivers/mtd/spi-nor/spi-nor.c | 7 -------
2 files changed, 2 insertions(+), 8 deletions(-)
diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c
index a4e18f6aaa33..7ded13507604 100644
--- a/drivers/mtd/devices/m25p80.c
+++ b/drivers/mtd/devices/m25p80.c
@@ -117,7 +117,8 @@ static ssize_t m25p80_write(struct spi_nor *nor, loff_t to, size_t len,
t[data_idx].tx_buf = buf;
t[data_idx].tx_nbits = data_nbits;
- t[data_idx].len = len;
+ t[data_idx].len = min3(len, spi_max_transfer_size(spi),
+ spi_max_message_size(spi) - cmd_sz);
spi_message_add_tail(&t[data_idx], &m);
ret = spi_sync(spi, &m);
diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c
index 42ae9a1529bb..cfa15f2801ad 100644
--- a/drivers/mtd/spi-nor/spi-nor.c
+++ b/drivers/mtd/spi-nor/spi-nor.c
@@ -1445,13 +1445,6 @@ static int spi_nor_write(struct mtd_info *mtd, loff_t to, size_t len,
goto write_err;
*retlen += written;
i += written;
- if (written != page_remain) {
- dev_err(nor->dev,
- "While writing %zu bytes written %zd bytes\n",
- page_remain, written);
- ret = -EIO;
- goto write_err;
- }
}
write_err:
--
2.14.0.rc0.dirty
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 832 bytes --]
next reply other threads:[~2018-04-27 6:18 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-04-27 6:18 NeilBrown [this message]
2018-05-09 14:02 ` [PATCH/RFC] mtd: spi-nor: honour max_message_size for spi-nor writes Boris Brezillon
2018-05-09 22:28 ` NeilBrown
2018-05-10 10:21 ` Marek Vasut
2018-05-10 11:57 ` NeilBrown
2018-05-10 12:27 ` Marek Vasut
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87efj1kw9u.fsf@notabene.neil.brown.name \
--to=neil@brown.name \
--cc=boris.brezillon@bootlin.com \
--cc=computersforpeace@gmail.com \
--cc=dwmw2@infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mtd@lists.infradead.org \
--cc=marek.vasut@gmail.com \
--cc=richard@nod.at \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).