From: Gregory CLEMENT <gregory.clement@bootlin.com>
To: Chris Packham <chris.packham@alliedtelesis.co.nz>,
miquel.raynal@bootlin.com, richard@nod.at, vigneshr@ti.com,
robh+dt@kernel.org, krzysztof.kozlowski+dt@linaro.org,
conor+dt@kernel.org
Cc: linux-mtd@lists.infradead.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
Chris Packham <chris.packham@alliedtelesis.co.nz>
Subject: Re: [PATCH v3 2/3] arm64: dts: marvell: Add NAND flash controller to AC5
Date: Thu, 13 Jul 2023 10:59:52 +0200 [thread overview]
Message-ID: <87h6q82nlj.fsf@BL-laptop> (raw)
In-Reply-To: <20230703035044.2063303-3-chris.packham@alliedtelesis.co.nz>
Chris Packham <chris.packham@alliedtelesis.co.nz> writes:
> The AC5/AC5X SoC has a NAND flash controller (NFC). Add this to
> the base SoC dtsi file as a disabled node. The NFC integration
> on the AC5/AC5X only supports SDR timing modes up to 3 so requires a
> dedicated compatible property so this limitation can be enforced.
>
> Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Now that binding and code has beeen applied I can apply this one on
mvebu/dt64
Thanks,
Gregory
> ---
>
> Notes:
> Changes in v3:
> - Use correct clock for NFC
> Changes in v2:
> - New.
>
> arch/arm64/boot/dts/marvell/ac5-98dx25xx.dtsi | 16 ++++++++++++++++
> 1 file changed, 16 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/marvell/ac5-98dx25xx.dtsi b/arch/arm64/boot/dts/marvell/ac5-98dx25xx.dtsi
> index c9ce1010c415..c64aaf51deb8 100644
> --- a/arch/arm64/boot/dts/marvell/ac5-98dx25xx.dtsi
> +++ b/arch/arm64/boot/dts/marvell/ac5-98dx25xx.dtsi
> @@ -297,6 +297,16 @@ spi1: spi@805a8000 {
> status = "disabled";
> };
>
> + nand: nand-controller@805b0000 {
> + compatible = "marvell,ac5-nand-controller";
> + reg = <0x0 0x805b0000 0x0 0x00000054>;
> + #address-cells = <0x1>;
> + #size-cells = <0x0>;
> + interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&nand_clock>;
> + status = "disabled";
> + };
> +
> gic: interrupt-controller@80600000 {
> compatible = "arm,gic-v3";
> #interrupt-cells = <3>;
> @@ -319,5 +329,11 @@ spi_clock: spi-clock {
> #clock-cells = <0>;
> clock-frequency = <200000000>;
> };
> +
> + nand_clock: nand-clock {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + clock-frequency = <400000000>;
> + };
> };
> };
> --
> 2.41.0
>
--
Gregory Clement, Bootlin
Embedded Linux and Kernel engineering
http://bootlin.com
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
next prev parent reply other threads:[~2023-07-13 9:00 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-07-03 3:50 [PATCH v3 0/3] mtd: rawnand: marvell: add support for AC5 SoC Chris Packham
2023-07-03 3:50 ` [PATCH v3 1/3] dt-bindings: mtd: Add AC5 specific binding Chris Packham
2023-07-12 12:32 ` Miquel Raynal
2023-07-12 18:13 ` Conor Dooley
2023-07-13 7:23 ` Miquel Raynal
2023-07-12 20:36 ` Chris Packham
2023-07-13 7:57 ` Miquel Raynal
2023-07-03 3:50 ` [PATCH v3 2/3] arm64: dts: marvell: Add NAND flash controller to AC5 Chris Packham
2023-07-13 8:59 ` Gregory CLEMENT [this message]
2023-07-03 3:50 ` [PATCH v3 3/3] mtd: rawnand: marvell: add support for AC5 SoC Chris Packham
2023-07-13 7:57 ` Miquel Raynal
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87h6q82nlj.fsf@BL-laptop \
--to=gregory.clement@bootlin.com \
--cc=chris.packham@alliedtelesis.co.nz \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mtd@lists.infradead.org \
--cc=miquel.raynal@bootlin.com \
--cc=richard@nod.at \
--cc=robh+dt@kernel.org \
--cc=vigneshr@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).