public inbox for linux-mtd@lists.infradead.org
 help / color / mirror / Atom feed
From: Gregory CLEMENT <gregory.clement@free-electrons.com>
To: Miquel Raynal <miquel.raynal@free-electrons.com>
Cc: David Woodhouse <dwmw2@infradead.org>,
	Brian Norris <computersforpeace@gmail.com>,
	Boris Brezillon <boris.brezillon@free-electrons.com>,
	Marek Vasut <marek.vasut@gmail.com>,
	Richard Weinberger <richard@nod.at>,
	Cyrille Pitchen <cyrille.pitchen@wedev4u.fr>,
	Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>,
	Jason Cooper <jason@lakedaemon.net>, Andrew Lunn <andrew@lunn.ch>,
	Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>,
	Russell King <linux@armlinux.org.uk>,
	Daniel Mack <daniel@zonque.org>,
	Haojian Zhuang <haojian.zhuang@gmail.com>,
	Robert Jarzmik <robert.jarzmik@free.fr>,
	Eric Miao <eric.y.miao@gmail.com>,
	Catalin Marinas <catalin.marinas@arm.com>,
	Will Deacon <will.deacon@arm.com>,
	Ezequiel Garcia <ezequiel.garcia@free-electrons.com>,
	Thomas Petazzoni <thomas.petazzoni@free-electrons.com>,
	devicetree@vger.kernel.org,
	Antoine Tenart <antoine.tenart@free-electrons.com>,
	Nadav Haklai <nadavh@marvell.com>,
	linux-mtd@lists.infradead. org,
	Neta Zur Hershkovits <neta@marvell.com>,
	Hanna Hawa <hannah@marvell.com>, Ofer Heifetz <oferh@marvell.com>,
	linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH 11/12] ARM64: dts: marvell: use reworked NAND controller driver on Armada 7K
Date: Fri, 15 Dec 2017 11:44:08 +0100	[thread overview]
Message-ID: <87r2rwl18n.fsf@free-electrons.com> (raw)
In-Reply-To: <87374cmghe.fsf@free-electrons.com> (Gregory CLEMENT's message of "Fri, 15 Dec 2017 11:29:33 +0100")

Hi,
 
 On ven., déc. 15 2017, Gregory CLEMENT <gregory.clement@free-electrons.com> wrote:

> Hi Miquel,
>  
>  On jeu., déc. 07 2017, Miquel Raynal <miquel.raynal@free-electrons.com> wrote:
>
>> Use the new bindings of the reworked Marvell NAND controller driver.
>> Also adapt the nand controller node organization to distinguish which
>> property is relevant for the controller, and which one is NAND chip
>> specific. Expose the partitions as a subnode of the NAND chip.
>>
>> Remove the 'marvell,nand-enable-arbiter' property, not needed anymore as
>> the driver activates the arbiter by default for all boards (either
>> needed or harmless).
>>
>> Signed-off-by: Miquel Raynal <miquel.raynal@free-electrons.com>
>
> Applied on mvebu/dt64

Well I have been said that actually thess changes are not ready and that
we should wait for the driver would me merged first so I moved it on
mvebu/dt64-nand

>
> Thanks,
>
> Gregory
>
>> ---
>>  arch/arm64/boot/dts/marvell/armada-7040-db.dts     | 52 +++++++++++++---------
>>  .../boot/dts/marvell/armada-cp110-master.dtsi      |  8 ++--
>>  2 files changed, 36 insertions(+), 24 deletions(-)
>>
>> diff --git a/arch/arm64/boot/dts/marvell/armada-7040-db.dts b/arch/arm64/boot/dts/marvell/armada-7040-db.dts
>> index 52b5341cb270..758452c10612 100644
>> --- a/arch/arm64/boot/dts/marvell/armada-7040-db.dts
>> +++ b/arch/arm64/boot/dts/marvell/armada-7040-db.dts
>> @@ -156,36 +156,48 @@
>>  	};
>>  };
>>  
>> -&cpm_nand {
>> +&cpm_nand_controller {
>>  	/*
>>  	 * SPI on CPM and NAND have common pins on this board. We can
>> -	 * use only one at a time. To enable the NAND (whihch will
>> +	 * use only one at a time. To enable the NAND (which will
>>  	 * disable the SPI), the "status = "okay";" line have to be
>>  	 * added here.
>>  	 */
>> -	num-cs = <1>;
>>  	pinctrl-0 = <&nand_pins>, <&nand_rb>;
>>  	pinctrl-names = "default";
>> -	nand-ecc-strength = <4>;
>> -	nand-ecc-step-size = <512>;
>> -	marvell,nand-enable-arbiter;
>> -	nand-on-flash-bbt;
>> -
>> -	partition@0 {
>> -		label = "U-Boot";
>> -		reg = <0 0x200000>;
>> -	};
>> -	partition@200000 {
>> -		label = "Linux";
>> -		reg = <0x200000 0xe00000>;
>> -	};
>> -	partition@1000000 {
>> -		label = "Filesystem";
>> -		reg = <0x1000000 0x3f000000>;
>> +
>> +	nand@0 {
>> +		reg = <0>;
>> +		label = "pxa3xx_nand-0";
>> +		marvell,rb = <0>;
>> +		nand-on-flash-bbt;
>> +		nand-ecc-strength = <4>;
>> +		nand-ecc-step-size = <512>;
>> +
>> +		partitions {
>> +			compatible = "fixed-partitions";
>> +			#address-cells = <1>;
>> +			#size-cells = <1>;
>> +
>> +			partition@0 {
>> +				label = "U-Boot";
>> +				reg = <0 0x200000>;
>> +			};
>> +
>> +			partition@200000 {
>> +				label = "Linux";
>> +				reg = <0x200000 0xe00000>;
>> +			};
>> +
>> +			partition@1000000 {
>> +				label = "Filesystem";
>> +				reg = <0x1000000 0x3f000000>;
>> +			};
>> +
>> +		};
>>  	};
>>  };
>>  
>> -
>>  &cpm_spi1 {
>>  	status = "okay";
>>  
>> diff --git a/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi
>> index e3b64d03fbd8..8a3cff9a7343 100644
>> --- a/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi
>> +++ b/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi
>> @@ -309,17 +309,17 @@
>>  				status = "disabled";
>>  			};
>>  
>> -			cpm_nand: nand@720000 {
>> +			cpm_nand_controller: nand@720000 {
>>  				/*
>>  				 * Due to the limiation of the pin available
>>  				 * this controller is only usable on the CPM
>>  				 * for A7K and on the CPS for A8K.
>>  				 */
>> -				compatible = "marvell,armada-8k-nand",
>> -					     "marvell,armada370-nand";
>> +				compatible = "marvell,armada-8k-nand-controller",
>> +					     "marvell,armada370-nand-controller";
>>  				reg = <0x720000 0x54>;
>>  				#address-cells = <1>;
>> -				#size-cells = <1>;
>> +				#size-cells = <0>;
>>  				interrupts = <ICU_GRP_NSR 115 IRQ_TYPE_LEVEL_HIGH>;
>>  				clocks = <&cpm_clk 1 2>;
>>  				marvell,system-controller = <&cpm_syscon0>;
>> -- 
>> 2.11.0
>>
>>
>> _______________________________________________
>> linux-arm-kernel mailing list
>> linux-arm-kernel@lists.infradead.org
>> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
>
> -- 
> Gregory Clement, Free Electrons
> Kernel, drivers, real-time and embedded Linux
> development, consulting, training and support.
> http://free-electrons.com

-- 
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com

  reply	other threads:[~2017-12-15 10:44 UTC|newest]

Thread overview: 48+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-12-07 20:18 [PATCH 00/12] Marvell NAND controller rework with ->exec_op() Miquel Raynal
2017-12-07 20:18 ` [PATCH 01/12] dt-bindings: mtd: add Marvell NAND controller documentation Miquel Raynal
2017-12-08 20:56   ` Boris Brezillon
2017-12-07 20:18 ` [PATCH 02/12] mtd: nand: add reworked Marvell NAND controller driver Miquel Raynal
2017-12-11 16:27   ` Ezequiel Garcia
2017-12-11 16:55     ` Miquel RAYNAL
2017-12-11 17:05       ` Boris Brezillon
2017-12-11 21:02         ` Miquel RAYNAL
2017-12-07 20:18 ` [PATCH 03/12] mtd: nand: replace pxa3xx_nand driver by its rework called marvell_nand Miquel Raynal
2017-12-07 20:18 ` [PATCH 04/12] dt-bindings: mtd: remove pxa3xx NAND controller documentation Miquel Raynal
2017-12-07 20:18 ` [PATCH 05/12] mtd: nand: remove useless fields from pxa3xx NAND platform data Miquel Raynal
2017-12-07 20:18 ` [PATCH 06/12] ARM: dts: armada-370-xp: use reworked NAND controller driver Miquel Raynal
2017-12-07 20:18 ` [PATCH 07/12] ARM: dts: armada-375: " Miquel Raynal
2017-12-07 20:18 ` [PATCH 08/12] ARM: dts: armada-38x: " Miquel Raynal
2017-12-07 20:18 ` [PATCH 09/12] ARM: dts: armada-39x: " Miquel Raynal
2017-12-07 20:18 ` [PATCH 10/12] ARM: dts: pxa: " Miquel Raynal
2017-12-07 20:18 ` [PATCH 11/12] ARM64: dts: marvell: use reworked NAND controller driver on Armada 7K Miquel Raynal
2017-12-15 10:29   ` Gregory CLEMENT
2017-12-15 10:44     ` Gregory CLEMENT [this message]
2017-12-07 20:18 ` [PATCH 12/12] ARM64: dts: marvell: use reworked NAND controller driver on Armada 8K Miquel Raynal
2017-12-15 10:29   ` Gregory CLEMENT
2017-12-15 10:44     ` Gregory CLEMENT
2017-12-09 23:27 ` [PATCH 00/12] Marvell NAND controller rework with ->exec_op() Ezequiel Garcia
2017-12-14  6:09 ` Boris Brezillon
2017-12-18  7:11   ` Robert Jarzmik
2017-12-18  8:25     ` Miquel RAYNAL
2017-12-20 21:26       ` Robert Jarzmik
2017-12-20 21:41         ` Boris Brezillon
2017-12-22 20:11           ` Robert Jarzmik
2017-12-22 21:24             ` Boris Brezillon
2017-12-22 22:37               ` Miquel RAYNAL
2017-12-22 22:50                 ` Miquel RAYNAL
2017-12-23 13:42                 ` Robert Jarzmik
2017-12-23 14:57                   ` Miquel RAYNAL
2017-12-23 17:14                     ` Robert Jarzmik
2017-12-23 22:42                       ` Miquel RAYNAL
2018-01-02 11:03                       ` Miquel RAYNAL
2018-01-02 19:21                         ` Robert Jarzmik
2018-01-03  7:40                           ` Miquel RAYNAL
2018-01-03 19:58                             ` Robert Jarzmik
2018-01-03 20:10                               ` Boris Brezillon
2018-01-03 20:52                                 ` Boris Brezillon
2018-01-07 20:55                                   ` Robert Jarzmik
2018-01-07 21:09                                     ` Miquel RAYNAL
2018-01-07 21:19                                       ` Boris Brezillon
2018-01-07 21:26                                         ` Boris Brezillon
2018-01-09  7:57                                   ` Robert Jarzmik
2018-01-09 11:06                                     ` Miquel RAYNAL

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=87r2rwl18n.fsf@free-electrons.com \
    --to=gregory.clement@free-electrons.com \
    --cc=andrew@lunn.ch \
    --cc=antoine.tenart@free-electrons.com \
    --cc=boris.brezillon@free-electrons.com \
    --cc=catalin.marinas@arm.com \
    --cc=computersforpeace@gmail.com \
    --cc=cyrille.pitchen@wedev4u.fr \
    --cc=daniel@zonque.org \
    --cc=devicetree@vger.kernel.org \
    --cc=dwmw2@infradead.org \
    --cc=eric.y.miao@gmail.com \
    --cc=ezequiel.garcia@free-electrons.com \
    --cc=hannah@marvell.com \
    --cc=haojian.zhuang@gmail.com \
    --cc=jason@lakedaemon.net \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-mtd@lists.infradead.org \
    --cc=linux@armlinux.org.uk \
    --cc=marek.vasut@gmail.com \
    --cc=mark.rutland@arm.com \
    --cc=miquel.raynal@free-electrons.com \
    --cc=nadavh@marvell.com \
    --cc=neta@marvell.com \
    --cc=oferh@marvell.com \
    --cc=richard@nod.at \
    --cc=robert.jarzmik@free.fr \
    --cc=robh+dt@kernel.org \
    --cc=sebastian.hesselbarth@gmail.com \
    --cc=thomas.petazzoni@free-electrons.com \
    --cc=will.deacon@arm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox