From: Miquel Raynal <miquel.raynal@bootlin.com>
To: Richard Weinberger <richard@nod.at>,
Miquel Raynal <miquel.raynal@bootlin.com>
Cc: Tudor Ambarus <Tudor.Ambarus@linaro.org>,
Vignesh Raghavendra <vigneshr@ti.com>,
Frieder Schrempf <frieder.schrempf@kontron.de>,
Michael Walle <michael@walle.cc>,
Pratyush Yadav <pratyush@kernel.org>,
linux-mtd@lists.infradead.org
Subject: [GIT PULL] mtd: nand: Changes for 7.0
Date: Fri, 13 Feb 2026 11:57:13 +0100 [thread overview]
Message-ID: <87seb4x65y.fsf@bootlin.com> (raw)
Hello,
This is the NAND PR for 7.0.
Thanks,
Miquèl
The following changes since commit 0f61b1860cc3f52aef9036d7235ed1f017632193:
Linux 6.19-rc5 (2026-01-11 17:03:14 -1000)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux.git tags/nand/for-7.0
for you to fetch changes up to 6c7860aa28b81b7e909b8d2072ed76fa22db6eda:
mtd: spi-nor: hisi-sfc: fix refcounting bug in hisi_spi_nor_register_all() (2026-02-06 15:22:42 +0100)
----------------------------------------------------------------
SPI NAND
- The major feature this release is the support for octal DTR
modes (8D-8D-8D).
- There has been as well a series of conversion to scoped for each OF
child loops.
- Support for Foresee F35SQB002G chips has been added.
Other changes are small fixes.
----------------------------------------------------------------
Ahmed Naseef (1):
mtd: spinand: add support for Dosilicon DS35Q1GA/DS35M1GA
Alok Tiwari (1):
mtd: rawnand: cadence: Fix return type of CDMA send-and-wait helper
Andrea Scian (2):
mtd: rawnand: pl353: Fix software ECC support
mtd: rawnand: pl353: Add message about ECC mode
Chen Ni (1):
mtd: spinand: winbond: Remove unneeded semicolon
Dan Carpenter (1):
mtd: spi-nor: hisi-sfc: fix refcounting bug in hisi_spi_nor_register_all()
David LaPorte (1):
mtd: spinand: Disable continuous read during probe
Geert Uytterhoeven (1):
mtd: rawnand: sunxi: Convert to common field_{get,prep}() helpers
Krzysztof Kozlowski (7):
mtd: rawnand: brcm: Simplify with scoped for each OF child loop
mtd: rawnand: denali: Simplify with scoped for each OF child loop
mtd: rawnand: ingenic: Simplify with scoped for each OF child loop
mtd: rawnand: qcom: Simplify with scoped for each OF child loop
mtd: rawnand: vf610: Fix Wvoid-pointer-to-enum-cast warning
mtd: rawnand: vf610: Simplify with scoped for each OF child loop
mtd: spi-nor: hisi-sfc: Simplify with scoped for each OF child loop
Md Sadre Alam (1):
mtd: spinand: fix NULL pointer dereference in spinand_support_vendor_ops()
Mikhail Kshevetskiy (1):
mtd: spinand: add Foresee F35SQB002G flash support
Miquel Raynal (29):
spi: spi-mem: Make the DTR command operation macro more suitable
spi: spi-mem: Create a repeated address operation
spi: spi-mem: Limit octal DTR constraints to octal DTR situations
Merge tag 'tags/spi-octal-dtr' into nand/next
spi: spi-mem: Create a repeated address operation
mtd: spinand: Fix kernel doc
mtd: spinand: Add missing check
mtd: spinand: Remove stale definitions
mtd: spinand: Use standard return values
mtd: spinand: Decouple write enable and write disable operations
mtd: spinand: Create an array of operation templates
mtd: spinand: Make use of the operation templates through SPINAND_OP()
mtd: spinand: macronix: Convert vendor specific operation to SPINAND_OP()
mtd: spinand: winbond: Convert W25N specific operation to SPINAND_OP()
mtd: spinand: winbond: Convert W35N specific operation to SPINAND_OP()
mtd: spinand: List vendor specific operations and make sure they are supported
mtd: spinand: macronix: Register vendor specific operation
mtd: spinand: winbond: Register W25N vendor specific operation
mtd: spinand: winbond: Register W35N vendor specific operation
mtd: spinand: winbond: Fix style
mtd: spinand: winbond: Rename IO_MODE register macro
mtd: spinand: winbond: Configure the IO mode after the dummy cycles
mtd: spinand: Gather all the bus interface steps in one single function
mtd: spinand: Add support for setting a bus interface
mtd: spinand: Propagate the bus interface across core helpers
mtd: spinand: Give the bus interface to the configuration helper
mtd: spinand: Warn if using SSDR-only vendor commands in a non SSDR mode
mtd: spinand: Add octal DTR support
mtd: spinand: winbond: W35N octal DTR support
Rob Herring (Arm) (1):
mtd: rawnand: atmel: Defer probe if SRAM is missing
drivers/mtd/nand/raw/atmel/nand-controller.c | 6 +-
drivers/mtd/nand/raw/brcmnand/brcmnand.c | 10 +-
drivers/mtd/nand/raw/cadence-nand-controller.c | 2 +-
drivers/mtd/nand/raw/denali_dt.c | 7 +-
drivers/mtd/nand/raw/ingenic/ingenic_nand_drv.c | 4 +-
drivers/mtd/nand/raw/pl35x-nand-controller.c | 4 +
drivers/mtd/nand/raw/qcom_nandc.c | 8 +-
drivers/mtd/nand/raw/sunxi_nand.c | 6 -
drivers/mtd/nand/raw/vf610_nfc.c | 6 +-
drivers/mtd/nand/spi/Makefile | 4 +-
drivers/mtd/nand/spi/core.c | 398 ++++++++++++++++++++----
drivers/mtd/nand/spi/dosilicon.c | 91 ++++++
drivers/mtd/nand/spi/esmt.c | 4 +-
drivers/mtd/nand/spi/foresee.c | 34 ++
drivers/mtd/nand/spi/gigadevice.c | 8 +-
drivers/mtd/nand/spi/macronix.c | 49 ++-
drivers/mtd/nand/spi/micron.c | 8 +-
drivers/mtd/nand/spi/toshiba.c | 3 +-
drivers/mtd/nand/spi/winbond.c | 129 ++++++--
drivers/mtd/spi-nor/controllers/hisi-sfc.c | 8 +-
drivers/spi/spi-mem.c | 15 +-
include/linux/mtd/spinand.h | 162 ++++++++--
include/linux/spi/spi-mem.h | 22 +-
23 files changed, 819 insertions(+), 169 deletions(-)
create mode 100644 drivers/mtd/nand/spi/dosilicon.c
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
next reply other threads:[~2026-02-13 10:57 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-02-13 10:57 Miquel Raynal [this message]
2026-02-13 17:22 ` [GIT PULL] mtd: nand: Changes for 7.0 Miquel Raynal
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87seb4x65y.fsf@bootlin.com \
--to=miquel.raynal@bootlin.com \
--cc=Tudor.Ambarus@linaro.org \
--cc=frieder.schrempf@kontron.de \
--cc=linux-mtd@lists.infradead.org \
--cc=michael@walle.cc \
--cc=pratyush@kernel.org \
--cc=richard@nod.at \
--cc=vigneshr@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox