public inbox for linux-mtd@lists.infradead.org
 help / color / mirror / Atom feed
From: Miquel Raynal <miquel.raynal@bootlin.com>
To: Richard Weinberger <richard@nod.at>,
	Miquel Raynal <miquel.raynal@bootlin.com>
Cc: Tudor Ambarus <Tudor.Ambarus@linaro.org>,
	Vignesh Raghavendra <vigneshr@ti.com>,
	Frieder Schrempf <frieder.schrempf@kontron.de>,
	Michael Walle <michael@walle.cc>,
	Pratyush Yadav <pratyush@kernel.org>,
	linux-mtd@lists.infradead.org
Subject: [GIT PULL] mtd: nand: Changes for 6.16
Date: Mon, 02 Jun 2025 18:38:47 +0200	[thread overview]
Message-ID: <87tt4yksiw.fsf@bootlin.com> (raw)

Hello,

This is the NAND PR for 6.16.

Thanks,
Miquèl

The following changes since commit 8ffd015db85fea3e15a77027fda6c02ced4d2444:

  Linux 6.15-rc2 (2025-04-13 11:54:49 -0700)

are available in the Git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux.git tags/nand/for-6.16

for you to fetch changes up to 3bfb22cecfe6b6f0d8ee56ef4b533cf68599c5d9:

  mtd: rawnand: brcmnand: legacy exec_op implementation (2025-05-26 11:32:33 +0200)

----------------------------------------------------------------
The SPI NAND subsystem has seen the introduction of DTR operations (the
equivalent of DDR transfers), which involved quite a few preparation
patches for clarifying macro names.

In the raw NAND subsystem, the brcmnand driver has been "fixed" for old
legacy SoCs with an update of the ->exec_op() hook, there has been the
introduction of a new controller driver named Loongson-1, and the
Qualcomm driver has received quite a few misc fixes as well as a new
compatible.

Aside from this, there is the usual load of misc improvement and fixes.

----------------------------------------------------------------
Dan Carpenter (1):
      mtd: rawnand: loongson1: Fix error code in ls1x_nand_dma_transfer()

David Regan (1):
      mtd: nand: brcmnand: fix NAND timeout when accessing eMMC

George Moussalem (1):
      mtd: spinand: esmt: fix id code for F50D1G41LB

Kaushal Kumar (1):
      dt-bindings: mtd: qcom,nandc: Document the SDX75 NAND controller

Keguang Zhang (3):
      dt-bindings: mtd: Add Loongson-1 NAND Controller
      mtd: rawnand: Add Loongson-1 NAND Controller Driver
      mtd: rawnand: loongson1: Fix inconsistent refcounting in ls1x_nand_chip_init()

Md Sadre Alam (3):
      mtd: rawnand: qcom: Pass 18 bit offset from NANDc base to BAM base
      mtd: rawnand: qcom: Fix last codeword read in qcom_param_page_type_exec()
      mtd: rawnand: qcom: Fix read len for onfi param page

Mikhail Arkhipov (1):
      mtd: nand: ecc-mxic: Fix use of uninitialized variable ret

Miquel Raynal (19):
      mtd: spinand: Use more specific naming for the reset op
      mtd: spinand: Use more specific naming for the write enable/disable op
      mtd: spinand: Use more specific naming for the read ID op
      mtd: spinand: Use more specific naming for the get/set feature ops
      mtd: spinand: Use more specific naming for the erase op
      mtd: spinand: Use more specific naming for the page read op
      mtd: spinand: Use more specific naming for the (single) read from cache ops
      mtd: spinand: Use more specific naming for the (dual output) read from cache ops
      mtd: spinand: Use more specific naming for the (dual IO) read from cache ops
      mtd: spinand: Use more specific naming for the (quad output) read from cache ops
      mtd: spinand: Use more specific naming for the (quad IO) read from cache ops
      mtd: spinand: Use more specific naming for the program execution op
      mtd: spinand: Use more specific naming for the (single) program load op
      mtd: spinand: Use more specific naming for the (quad) program load op
      mtd: spinand: Define octal operations
      mtd: spinand: winbond: Rename DTR variants
      mtd: spinand: winbond: Add support for W35N01JW in single mode
      mtd: spinand: winbond: Add octal support
      mtd: spinand: winbond: Add support for W35N02JW and W35N04JW chips

Philipp Stanner (1):
      mtd: rawnand: Use non-hybrid PCI devres API

Wentao Liang (3):
      mtd: bcm47xxnflash: Add error handling for bcm47xxnflash_ops_bcm4706_ctl_cmd()
      mtd: nand: sunxi: Add randomizer configuration before randomizer enable
      mtd: rawnand: sunxi: Add randomizer configuration in sunxi_nfc_hw_ecc_write_chunk

Álvaro Fernández Rojas (2):
      mtd: rawnand: brcmnand: remove unused parameters
      mtd: rawnand: brcmnand: legacy exec_op implementation

 .../mtd/loongson,ls1b-nand-controller.yaml         |  72 ++
 .../devicetree/bindings/mtd/qcom,nandc.yaml        |  30 +-
 MAINTAINERS                                        |   1 +
 drivers/mtd/nand/ecc-mxic.c                        |   2 +-
 drivers/mtd/nand/qpic_common.c                     |   8 +-
 drivers/mtd/nand/raw/Kconfig                       |   7 +
 drivers/mtd/nand/raw/Makefile                      |   1 +
 drivers/mtd/nand/raw/bcm47xxnflash/ops_bcm4706.c   |   5 +-
 drivers/mtd/nand/raw/brcmnand/brcmnand.c           | 248 +++++-
 drivers/mtd/nand/raw/denali_pci.c                  |  13 +-
 drivers/mtd/nand/raw/loongson1-nand-controller.c   | 836 +++++++++++++++++++++
 drivers/mtd/nand/raw/qcom_nandc.c                  |  18 +-
 drivers/mtd/nand/raw/sunxi_nand.c                  |   2 +
 drivers/mtd/nand/spi/alliancememory.c              |  20 +-
 drivers/mtd/nand/spi/ato.c                         |  14 +-
 drivers/mtd/nand/spi/core.c                        |  20 +-
 drivers/mtd/nand/spi/esmt.c                        |  22 +-
 drivers/mtd/nand/spi/foresee.c                     |  16 +-
 drivers/mtd/nand/spi/gigadevice.c                  |  60 +-
 drivers/mtd/nand/spi/macronix.c                    |  20 +-
 drivers/mtd/nand/spi/micron.c                      |  38 +-
 drivers/mtd/nand/spi/paragon.c                     |  20 +-
 drivers/mtd/nand/spi/skyhigh.c                     |  20 +-
 drivers/mtd/nand/spi/toshiba.c                     |  22 +-
 drivers/mtd/nand/spi/winbond.c                     | 128 +++-
 drivers/mtd/nand/spi/xtx.c                         |  20 +-
 drivers/spi/spi-qpic-snand.c                       |   1 +
 include/linux/mtd/nand-qpic-common.h               |   4 +-
 include/linux/mtd/spinand.h                        | 121 +--
 29 files changed, 1521 insertions(+), 268 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/mtd/loongson,ls1b-nand-controller.yaml
 create mode 100644 drivers/mtd/nand/raw/loongson1-nand-controller.c

______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

             reply	other threads:[~2025-06-02 16:38 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-06-02 16:38 Miquel Raynal [this message]
2025-06-02 16:48 ` [GIT PULL] mtd: nand: Changes for 6.16 Miquel Raynal

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=87tt4yksiw.fsf@bootlin.com \
    --to=miquel.raynal@bootlin.com \
    --cc=Tudor.Ambarus@linaro.org \
    --cc=frieder.schrempf@kontron.de \
    --cc=linux-mtd@lists.infradead.org \
    --cc=michael@walle.cc \
    --cc=pratyush@kernel.org \
    --cc=richard@nod.at \
    --cc=vigneshr@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox