public inbox for linux-mtd@lists.infradead.org
 help / color / mirror / Atom feed
* [PATCH v3] mtd: spi-nor: macronix: Add support for mx66l2g45g
@ 2022-05-23 15:03 Jiaqing Zhao
  2022-05-23 17:04 ` Michael Walle
  0 siblings, 1 reply; 4+ messages in thread
From: Jiaqing Zhao @ 2022-05-23 15:03 UTC (permalink / raw)
  To: linux-mtd, Tudor Ambarus, Pratyush Yadav, Michael Walle
  Cc: linux-kernel, Jiaqing Zhao

Macronix mx66l2g45g is a 3V, 2Gbit (256MB) NOR flash that supports
x1, x2, and x4 operation modes.

Tested read/write/erase with Aspeed AST2600 BMC SoC operating in x2
mode at 50MHz, using Aspeed spi-mem driver.

Signed-off-by: Jiaqing Zhao <jiaqing.zhao@linux.intel.com>
---
 drivers/mtd/spi-nor/macronix.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/mtd/spi-nor/macronix.c b/drivers/mtd/spi-nor/macronix.c
index d81a4cb2812b..33d02a01b381 100644
--- a/drivers/mtd/spi-nor/macronix.c
+++ b/drivers/mtd/spi-nor/macronix.c
@@ -95,6 +95,8 @@ static const struct flash_info macronix_nor_parts[] = {
 	{ "mx66l1g45g",  INFO(0xc2201b, 0, 64 * 1024, 2048)
 		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
 			      SPI_NOR_QUAD_READ) },
+	// TODO: Use SNOR_ID3() for "mx66l2g45g"
+	{ "mx66l2g45g",  INFO(0xc2201c, 0, 0, 0) PARSE_SFDP },
 	{ "mx66l1g55g",  INFO(0xc2261b, 0, 64 * 1024, 2048)
 		NO_SFDP_FLAGS(SPI_NOR_QUAD_READ) },
 	{ "mx66u2g45g",	 INFO(0xc2253c, 0, 64 * 1024, 4096)
-- 
2.34.1


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

^ permalink raw reply related	[flat|nested] 4+ messages in thread

end of thread, other threads:[~2022-05-24  7:20 UTC | newest]

Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2022-05-23 15:03 [PATCH v3] mtd: spi-nor: macronix: Add support for mx66l2g45g Jiaqing Zhao
2022-05-23 17:04 ` Michael Walle
2022-05-24  3:35   ` Jiaqing Zhao
2022-05-24  7:19     ` Michael Walle

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox