public inbox for linux-mtd@lists.infradead.org
 help / color / mirror / Atom feed
From: <Tudor.Ambarus@microchip.com>
To: <macromorgan@hotmail.com>, <linux-mtd@lists.infradead.org>,
	<vigneshr@ti.com>, <andreas@rammhold.de>, <figgyc@figgyc.uk>
Cc: <richard@nod.at>, <miquel.raynal@bootlin.com>
Subject: Re: [PATCH] mtd: spi-nor: XTX: Add support for XTX XT25F128B
Date: Mon, 5 Apr 2021 08:52:11 +0000	[thread overview]
Message-ID: <9930cb45-cd30-9cc5-c099-7cc547ec60d5@microchip.com> (raw)
In-Reply-To: <SN6PR06MB5342C82F372F37FB8E21B327A57A9@SN6PR06MB5342.namprd06.prod.outlook.com>

Hi,

On 4/2/21 11:15 PM, Chris Morgan wrote:
> EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe
> 
> Add support for a new vendor (XTX) along with a new chip from the
> vendor (XT25F128B). This chip is used in the Odroid Go Advance,
> and has been tested extensively using the spi-gpio driver, as it
> is connected to a serial flash controller that is not currently
> supported (but the pins can be repurposed to GPIO). Read, write, and
> erase all work as expected.
> 
> Datasheet can be found here:
> https://datasheet.lcsc.com/szlcsc/2005251034_XTX-XT25F128BSSIGT_C558844.pdf
> 
> Signed-off-by: Chris Morgan <macromorgan@hotmail.com>

Chris, we're trying to figure out how to deal with the continuation codes.
Discussions on going at:
https://lkml.org/lkml/2021/2/7/223
https://www.spinics.net/lists/kernel/msg3808260.html

> ---
>  drivers/mtd/spi-nor/Makefile |  1 +
>  drivers/mtd/spi-nor/core.c   |  1 +
>  drivers/mtd/spi-nor/core.h   |  1 +
>  drivers/mtd/spi-nor/xtx.c    | 24 ++++++++++++++++++++++++
>  4 files changed, 27 insertions(+)
>  create mode 100644 drivers/mtd/spi-nor/xtx.c
> 
> diff --git a/drivers/mtd/spi-nor/Makefile b/drivers/mtd/spi-nor/Makefile
> index 653923896205..3f7a52d7fa0b 100644
> --- a/drivers/mtd/spi-nor/Makefile
> +++ b/drivers/mtd/spi-nor/Makefile
> @@ -17,6 +17,7 @@ spi-nor-objs                  += sst.o
>  spi-nor-objs                   += winbond.o
>  spi-nor-objs                   += xilinx.o
>  spi-nor-objs                   += xmc.o
> +spi-nor-objs                   += xtx.o
>  obj-$(CONFIG_MTD_SPI_NOR)      += spi-nor.o
> 
>  obj-$(CONFIG_MTD_SPI_NOR)      += controllers/
> diff --git a/drivers/mtd/spi-nor/core.c b/drivers/mtd/spi-nor/core.c
> index 0522304f52fa..9a89ec473e4b 100644
> --- a/drivers/mtd/spi-nor/core.c
> +++ b/drivers/mtd/spi-nor/core.c
> @@ -2215,6 +2215,7 @@ static const struct spi_nor_manufacturer *manufacturers[] = {
>         &spi_nor_winbond,
>         &spi_nor_xilinx,
>         &spi_nor_xmc,
> +       &spi_nor_xtx,
>  };
> 
>  static const struct flash_info *
> diff --git a/drivers/mtd/spi-nor/core.h b/drivers/mtd/spi-nor/core.h
> index 4a3f7f150b5d..ee0e45eaffcd 100644
> --- a/drivers/mtd/spi-nor/core.h
> +++ b/drivers/mtd/spi-nor/core.h
> @@ -425,6 +425,7 @@ extern const struct spi_nor_manufacturer spi_nor_sst;
>  extern const struct spi_nor_manufacturer spi_nor_winbond;
>  extern const struct spi_nor_manufacturer spi_nor_xilinx;
>  extern const struct spi_nor_manufacturer spi_nor_xmc;
> +extern const struct spi_nor_manufacturer spi_nor_xtx;
> 
>  void spi_nor_spimem_setup_op(const struct spi_nor *nor,
>                              struct spi_mem_op *op,
> diff --git a/drivers/mtd/spi-nor/xtx.c b/drivers/mtd/spi-nor/xtx.c
> new file mode 100644
> index 000000000000..4eec737e94c7
> --- /dev/null
> +++ b/drivers/mtd/spi-nor/xtx.c
> @@ -0,0 +1,24 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (C) 2021, Chris Morgan <macromorgan@hotmail.com>
> + * Based on XMC SPI NOR module
> + * Copyright (C) 2005, Intec Automation Inc.
> + * Copyright (C) 2014, Freescale Semiconductor, Inc.
> + */
> +
> +#include <linux/mtd/spi-nor.h>
> +
> +#include "core.h"
> +
> +static const struct flash_info xtx_parts[] = {
> +       /* XTX (XTX Technology Limited) */
> +       { "XT25F128B", INFO(0x0b4018, 0, 64 * 1024, 256,
> +                            SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
> +                            SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB) },
> +};
> +
> +const struct spi_nor_manufacturer spi_nor_xtx = {
> +       .name = "xtx",
> +       .parts = xtx_parts,
> +       .nparts = ARRAY_SIZE(xtx_parts),
> +};
> --
> 2.25.1
> 

______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

  reply	other threads:[~2021-04-05  8:53 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-04-02 20:15 [PATCH] mtd: spi-nor: XTX: Add support for XTX XT25F128B Chris Morgan
2021-04-05  8:52 ` Tudor.Ambarus [this message]
2021-04-05 19:16   ` Chris Morgan
2021-06-28  5:56     ` Tudor.Ambarus
2021-07-02 12:49 ` Alex Bee
2021-07-02 13:21   ` Tudor.Ambarus
2021-07-02 14:33     ` Alex Bee

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=9930cb45-cd30-9cc5-c099-7cc547ec60d5@microchip.com \
    --to=tudor.ambarus@microchip.com \
    --cc=andreas@rammhold.de \
    --cc=figgyc@figgyc.uk \
    --cc=linux-mtd@lists.infradead.org \
    --cc=macromorgan@hotmail.com \
    --cc=miquel.raynal@bootlin.com \
    --cc=richard@nod.at \
    --cc=vigneshr@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox