From: ashwinp@aftek.com
To: linux-mtd@lists.infradead.org
Subject: Is my flash being detected?
Date: Fri, 22 Jun 2001 08:23:03 -0600 (MDT) [thread overview]
Message-ID: <993219781.58250@email.aftek.com> (raw)
Hi freinds,
I am trying to use mtd on L7205sdb.The flash chip used is AM29LV160DB.
The flash size is 16 MB in byte mode and processor data bus being 32 bits wide.
The .config for MTD is as below
CONFIG_MTD=y
CONFIG_MTD_DEBUG=y
CONFIG_MTD_DEBUG_VERBOSE=3
CONFIG_MTD_CFI=y
CONFIG_MTD_CFI_AMDEXT=y
CONFIG_MTD_ROM=y
CONFIG_MTD_PHYSMAP=y
CONFIG_MTD_PHYSMAP_START=000000
CONFIG_MTD_PHYSMAP_LEN=10000
CONFIG_MTD_PHYSMAP_BUSWIDTH=4
It does say that AMd flash found but at the end it complains that
"cfi_probe: No supported Vendor Command Set found"
Given below are my bootup messages
Linux version 2.2.1-rmk2 (root@localhost.localdomain) (libraries: /usr/local/arm/lib/gcc-lib/arm-linux/egcs-2.91.66/:/usr/lib/gcc/arm-linux/egcs-2.91.66/:/usr/local/arm/arm-linux/lib/arm-linux/egcs-2.91.66/:/usr/local/arm/arm-linux/lib/) #916 Fri Jun 22 17:51:46 IST 2001
start_kernl: Before setup_arch, 00000000-00000000
next reply other threads:[~2001-06-22 14:17 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2001-06-22 14:23 ashwinp [this message]
2001-06-22 14:42 ` Is my flash being detected? Vipin Malik
2001-06-22 15:49 ` ashwinp
2001-06-22 16:04 ` David Woodhouse
2001-06-22 14:45 ` Vipin Malik
2001-06-22 14:44 ` David Woodhouse
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=993219781.58250@email.aftek.com \
--to=ashwinp@aftek.com \
--cc=linux-mtd@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox