public inbox for linux-mtd@lists.infradead.org
 help / color / mirror / Atom feed
From: "Rafał Miłecki" <zajec5@gmail.com>
To: MTD Maling List <linux-mtd@lists.infradead.org>
Cc: linux-spi@vger.kernel.org, Kamal Dasu <kdasu.kdev@gmail.com>,
	Boris Brezillon <boris.brezillon@collabora.com>
Subject: spi-nor 5.11 regression: Division by zero in kernel
Date: Mon, 2 Aug 2021 15:24:27 +0200	[thread overview]
Message-ID: <99bdb1eb-71a8-99e6-be03-a97185246740@gmail.com> (raw)

Hi,

It seems that kernel 5.11 broke spi-nor on Broadcom Northstar (BCM5301X)
platforms.

The problem seems to be spi_nor_spimem_read_data() which calculates:
op.dummy.nbytes = (nor->read_dummy * op.dummy.buswidth) / 8;

On Northstar this happens to be:
op.dummy.nbytes = (0 * 0) / 8;

That results in bcm_qspi_bspi_set_flex_mode() dividing by zero in the:
bpp |= (op->dummy.nbytes * 8) / op->dummy.buswidth;

Could you take a look at that issue, please?

GOOD	5.10.55
BAD	5.11.22
BAD	5.12.19
BAD	5.13.2
BAD	5.13.7

[    1.075513] Division by zero in kernel.
[    1.079354] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.13.7 #18
[    1.085376] Hardware name: BCM5301X
[    1.088873] [<c0108394>] (unwind_backtrace) from [<c010498c>] (show_stack+0x10/0x14)
[    1.096666] [<c010498c>] (show_stack) from [<c0696470>] (dump_stack+0x94/0xa8)
[    1.103926] [<c0696470>] (dump_stack) from [<c03e7f94>] (Ldiv0+0x8/0x10)
[    1.110653] [<c03e7f94>] (Ldiv0) from [<c0699274>] (bcm_qspi_exec_mem_op+0x3e0/0x744)
[    1.118512] [<c0699274>] (bcm_qspi_exec_mem_op) from [<c0698740>] (spi_mem_exec_op+0x184/0x4fc)
[    1.127234] [<c0698740>] (spi_mem_exec_op) from [<c0698bac>] (spi_mem_dirmap_read+0xf4/0x1c8)
[    1.135780] [<c0698bac>] (spi_mem_dirmap_read) from [<c0697d58>] (spi_nor_spimem_read_data+0x13c/0x1ec)
[    1.145199] [<c0697d58>] (spi_nor_spimem_read_data) from [<c0498d60>] (spi_nor_read+0x16c/0x174)
[    1.154008] [<c0498d60>] (spi_nor_read) from [<c04835d0>] (mtd_read_oob_std+0x9c/0xa4)
[    1.161964] [<c04835d0>] (mtd_read_oob_std) from [<c04855d0>] (mtd_read_oob+0x84/0x148)
[    1.169997] [<c04855d0>] (mtd_read_oob) from [<c04856f4>] (mtd_read+0x60/0x90)
[    1.177237] [<c04856f4>] (mtd_read) from [<c048ab50>] (bcm47xxpart_parse+0x1d4/0x744)
[    1.185089] [<c048ab50>] (bcm47xxpart_parse) from [<c0488568>] (parse_mtd_partitions+0x188/0x424)
[    1.193985] [<c0488568>] (parse_mtd_partitions) from [<c0486018>] (mtd_device_parse_register+0x7c/0x1c0)
[    1.203489] [<c0486018>] (mtd_device_parse_register) from [<c04998b8>] (spi_nor_probe+0x20c/0x2d0)
[    1.212471] [<c04998b8>] (spi_nor_probe) from [<c046fbf8>] (really_probe+0xf0/0x4dc)
[    1.220245] [<c046fbf8>] (really_probe) from [<c046dd40>] (bus_for_each_drv+0x80/0xd0)
[    1.228184] [<c046dd40>] (bus_for_each_drv) from [<c04701d0>] (__device_attach+0xf8/0x15c)
[    1.236468] [<c04701d0>] (__device_attach) from [<c046edd4>] (bus_probe_device+0x84/0x8c)
[    1.244668] [<c046edd4>] (bus_probe_device) from [<c046c6c4>] (device_add+0x300/0x840)
[    1.252606] [<c046c6c4>] (device_add) from [<c04b3dc4>] (spi_add_device+0x9c/0x164)
[    1.260292] [<c04b3dc4>] (spi_add_device) from [<c04b482c>] (spi_register_controller+0x8ac/0xbc0)
[    1.269187] [<c04b482c>] (spi_register_controller) from [<c04b7bd4>] (bcm_qspi_probe+0x600/0x700)
[    1.278092] [<c04b7bd4>] (bcm_qspi_probe) from [<c0471d3c>] (platform_probe+0x48/0x8c)
[    1.286030] [<c0471d3c>] (platform_probe) from [<c046fbf8>] (really_probe+0xf0/0x4dc)
[    1.293880] [<c046fbf8>] (really_probe) from [<c04705dc>] (device_driver_attach+0xf0/0x100)
[    1.302254] [<c04705dc>] (device_driver_attach) from [<c0470678>] (__driver_attach+0x8c/0x11c)
[    1.310888] [<c0470678>] (__driver_attach) from [<c046dc74>] (bus_for_each_dev+0x74/0xc0)
[    1.319086] [<c046dc74>] (bus_for_each_dev) from [<c046efc8>] (bus_add_driver+0xf4/0x1dc)
[    1.327286] [<c046efc8>] (bus_add_driver) from [<c0470cdc>] (driver_register+0x88/0x118)
[    1.335397] [<c0470cdc>] (driver_register) from [<c01016dc>] (do_one_initcall+0x54/0x1d0)
[    1.343598] [<c01016dc>] (do_one_initcall) from [<c08010e8>] (kernel_init_freeable+0x244/0x2ac)
[    1.352337] [<c08010e8>] (kernel_init_freeable) from [<c069a7c8>] (kernel_init+0x8/0x118)
[    1.360536] [<c069a7c8>] (kernel_init) from [<c0100130>] (ret_from_fork+0x14/0x24)
[    1.368125] Exception stack(0xc1035fb0 to 0xc1035ff8)
[    1.373184] 5fa0:                                     00000000 00000000 00000000 00000000
[    1.381384] 5fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[    1.389582] 5fe0: 00000000 00000000 00000000 00000000 00000013 00000000

______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

             reply	other threads:[~2021-08-02 13:25 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-08-02 13:24 Rafał Miłecki [this message]
2021-08-02 14:39 ` spi-nor 5.11 regression: Division by zero in kernel Tudor.Ambarus
2021-08-02 18:12   ` Pratyush Yadav
2021-08-03  4:13     ` Tudor.Ambarus

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=99bdb1eb-71a8-99e6-be03-a97185246740@gmail.com \
    --to=zajec5@gmail.com \
    --cc=boris.brezillon@collabora.com \
    --cc=kdasu.kdev@gmail.com \
    --cc=linux-mtd@lists.infradead.org \
    --cc=linux-spi@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox