* MD2811-D32 DOC
@ 2004-05-12 14:13 J C
2004-05-12 14:22 ` David Woodhouse
0 siblings, 1 reply; 2+ messages in thread
From: J C @ 2004-05-12 14:13 UTC (permalink / raw)
To: linux-mtd
Hello all,
I am having problems with the DOC MD2811-D32. I am assuming to use the
nand drivers for it since M-sys says it is nand technology. The diskonchip
module in the nand directory will not compile. I am using kernel
2.4.21-rmk1-omap and it is patched with the latest drivers. Can anyone tell
me if there is a newer version where diskonchip isn't broken date 3-27-2004
on the diskonchip module.
Regards,
John
_________________________________________________________________
Check out the coupons and bargains on MSN Offers! http://youroffers.msn.com
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: MD2811-D32 DOC
2004-05-12 14:13 MD2811-D32 DOC J C
@ 2004-05-12 14:22 ` David Woodhouse
0 siblings, 0 replies; 2+ messages in thread
From: David Woodhouse @ 2004-05-12 14:22 UTC (permalink / raw)
To: J C; +Cc: linux-mtd
On Wed, 2004-05-12 at 10:13 -0400, J C wrote:
> Hello all,
>
> I am having problems with the DOC MD2811-D32. I am assuming to use the
> nand drivers for it since M-sys says it is nand technology. The diskonchip
> module in the nand directory will not compile. I am using kernel
> 2.4.21-rmk1-omap and it is patched with the latest drivers. Can anyone tell
> me if there is a newer version where diskonchip isn't broken date 3-27-2004
> on the diskonchip module.
It might help if you were slightly more specific about the compilation
failure you see.
It probably won't help _much_ though. It's likely that it's because
you're using such an ancient kernel.
--
dwmw2
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2004-05-12 14:22 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2004-05-12 14:13 MD2811-D32 DOC J C
2004-05-12 14:22 ` David Woodhouse
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox