public inbox for linux-mtd@lists.infradead.org
 help / color / mirror / Atom feed
From: "Michael Walle" <mwalle@kernel.org>
To: "Christian Marangi" <ansuelsmth@gmail.com>,
	"Tudor Ambarus" <tudor.ambarus@linaro.org>,
	"Pratyush Yadav" <pratyush@kernel.org>,
	"Miquel Raynal" <miquel.raynal@bootlin.com>,
	"Richard Weinberger" <richard@nod.at>,
	"Vignesh Raghavendra" <vigneshr@ti.com>,
	<linux-kernel@vger.kernel.org>, <linux-mtd@lists.infradead.org>
Cc: "David Bauer" <mail@david-bauer.net>
Subject: Re: [PATCH] mtd: spi-nor: Add support for BoHong bh25q128as
Date: Mon, 19 Feb 2024 09:35:27 +0100	[thread overview]
Message-ID: <CZ8X218EWPC9.25TO9O5C7VXQ9@kernel.org> (raw)
In-Reply-To: <20240217122029.3278-1-ansuelsmth@gmail.com>


[-- Attachment #1.1: Type: text/plain, Size: 3750 bytes --]

Hi,

On Sat Feb 17, 2024 at 1:20 PM CET, Christian Marangi wrote:
> From: David Bauer <mail@david-bauer.net>
>
> Add MTD support for the BoHong bh25q128as SPI NOR chip.
> The chip has 16MB of total capacity, divided into a total of 256
> sectors, each 64KB sized. The chip also supports 4KB sectors.
> Additionally, it supports dual and quad read modes.
>
> Datasheet is public and can be found here [1].

Last time it wasn't clear if this flash will support SFDP or not.
Could you please try to dump the SFDP again, see [1].


> Functionality was verified on an Tenbay WR1800K / MTK MT7621 board.

Also per [1], you'd need to provide your test results.

> [1] https://www.e-interlink.com.tw/userUpload/files/BH25Q128AS_v1_0.pdf

Link: right above your SoB please.

> Signed-off-by: David Bauer <mail@david-bauer.net>
> [ reworked to new flash_info format ]
> Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
> ---
>  drivers/mtd/spi-nor/Makefile |  1 +
>  drivers/mtd/spi-nor/bohong.c | 24 ++++++++++++++++++++++++
>  drivers/mtd/spi-nor/core.c   |  1 +
>  drivers/mtd/spi-nor/core.h   |  1 +
>  4 files changed, 27 insertions(+)
>  create mode 100644 drivers/mtd/spi-nor/bohong.c
>
> diff --git a/drivers/mtd/spi-nor/Makefile b/drivers/mtd/spi-nor/Makefile
> index 5e68468b72fc..c8849cf5124f 100644
> --- a/drivers/mtd/spi-nor/Makefile
> +++ b/drivers/mtd/spi-nor/Makefile
> @@ -2,6 +2,7 @@
>  
>  spi-nor-objs			:= core.o sfdp.o swp.o otp.o sysfs.o
>  spi-nor-objs			+= atmel.o
> +spi-nor-objs			+= bohong.o
>  spi-nor-objs			+= eon.o
>  spi-nor-objs			+= esmt.o
>  spi-nor-objs			+= everspin.o
> diff --git a/drivers/mtd/spi-nor/bohong.c b/drivers/mtd/spi-nor/bohong.c
> new file mode 100644
> index 000000000000..26988c139262
> --- /dev/null
> +++ b/drivers/mtd/spi-nor/bohong.c
> @@ -0,0 +1,24 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (C) 2005, Intec Automation Inc.
> + * Copyright (C) 2014, Freescale Semiconductor, Inc.

Please remove, there is nothing from the old code left here.

> + */
> +
> +#include <linux/mtd/spi-nor.h>
> +
> +#include "core.h"
> +
> +static const struct flash_info bohong_parts[] = {
> +	{
> +		.id = SNOR_ID(0x68, 0x40, 0x18),
> +		.name = "bh25q128as",
No names anymore, please.

> +		.size = SZ_16M,
> +		.no_sfdp_flags = SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ,
> +	},
> +};
> +
> +const struct spi_nor_manufacturer spi_nor_bohong = {
> +	.name = "bohong",

This should be dropped, too. Otherwise looks good, if SFDP is not
supported.

-michael

[1] https://docs.kernel.org/driver-api/mtd/spi-nor.html

> +	.parts = bohong_parts,
> +	.nparts = ARRAY_SIZE(bohong_parts),
> +};
> diff --git a/drivers/mtd/spi-nor/core.c b/drivers/mtd/spi-nor/core.c
> index 4129764fad8c..29c28ee683a1 100644
> --- a/drivers/mtd/spi-nor/core.c
> +++ b/drivers/mtd/spi-nor/core.c
> @@ -2037,6 +2037,7 @@ int spi_nor_sr2_bit7_quad_enable(struct spi_nor *nor)
>  
>  static const struct spi_nor_manufacturer *manufacturers[] = {
>  	&spi_nor_atmel,
> +	&spi_nor_bohong,
>  	&spi_nor_eon,
>  	&spi_nor_esmt,
>  	&spi_nor_everspin,
> diff --git a/drivers/mtd/spi-nor/core.h b/drivers/mtd/spi-nor/core.h
> index d36c0e072954..c293568ae827 100644
> --- a/drivers/mtd/spi-nor/core.h
> +++ b/drivers/mtd/spi-nor/core.h
> @@ -601,6 +601,7 @@ struct sfdp {
>  
>  /* Manufacturer drivers. */
>  extern const struct spi_nor_manufacturer spi_nor_atmel;
> +extern const struct spi_nor_manufacturer spi_nor_bohong;
>  extern const struct spi_nor_manufacturer spi_nor_eon;
>  extern const struct spi_nor_manufacturer spi_nor_esmt;
>  extern const struct spi_nor_manufacturer spi_nor_everspin;


[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 252 bytes --]

[-- Attachment #2: Type: text/plain, Size: 144 bytes --]

______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

  reply	other threads:[~2024-02-19  8:35 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-02-17 12:20 [PATCH] mtd: spi-nor: Add support for BoHong bh25q128as Christian Marangi
2024-02-19  8:35 ` Michael Walle [this message]
2024-02-19 21:56   ` Christian Marangi
  -- strict thread matches above, loose matches on Subject: below --
2021-05-09 14:47 David Bauer
2021-05-10  8:00 ` Michael Walle
2021-05-10  9:28   ` David Bauer
2021-05-10  9:35     ` Michael Walle
2021-05-10 10:27       ` David Bauer
2021-05-10 10:56         ` Michael Walle
2021-05-10 11:04           ` David Bauer
2021-05-10 11:22             ` Michael Walle
2021-05-18 19:39               ` David Bauer
2021-06-28  5:48                 ` Tudor.Ambarus
2021-07-02 14:03                   ` Tudor.Ambarus
2021-07-03 15:58                     ` George Brooke
2021-07-03 16:20                       ` Michael Walle

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=CZ8X218EWPC9.25TO9O5C7VXQ9@kernel.org \
    --to=mwalle@kernel.org \
    --cc=ansuelsmth@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mtd@lists.infradead.org \
    --cc=mail@david-bauer.net \
    --cc=miquel.raynal@bootlin.com \
    --cc=pratyush@kernel.org \
    --cc=richard@nod.at \
    --cc=tudor.ambarus@linaro.org \
    --cc=vigneshr@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox