public inbox for linux-mtd@lists.infradead.org
 help / color / mirror / Atom feed
From: "zydla son" <zydlason@hotmail.com>
To: "PPC-embedded" <linuxppc-embedded@lists.linuxppc.org>
Cc: "MTD" <linux-mtd@lists.infradead.org>
Subject: kernel can not detect flash device.
Date: Mon, 14 May 2001 15:35:06 +0200	[thread overview]
Message-ID: <DAV46AyfxRydC3hSsxL000018db@hotmail.com> (raw)

Hi,
    
    My target platform is ForcePowerCore 6750 which has four userflash(AM29F016) and I choose the relative options according to the "Linux MTD, JFFS HOWTO",but kernel can not detect flash device.
    Some infos:
_______________________________________________________________________________
physmap flash device: 200000 at ffe00000   /* system address range is from ffe0.0000 to ffff.ffff */
Physically mapped flash: Found no CFI device at location zero

    My .config(about MTD)
_______________________________________________________________________________
#
# Memory Technology Devices (MTD)
#
CONFIG_MTD=y
CONFIG_MTD_DEBUG=y
CONFIG_MTD_DEBUG_VERBOSE=3
# CONFIG_MTD_PARTITIONS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
# CONFIG_MTD_BOOTLDR_PARTS is not set
# CONFIG_MTD_CHAR is not set
# CONFIG_MTD_BLOCK is not set
# CONFIG_MTD_BLOCK_RO is not set
# CONFIG_FTL is not set
# CONFIG_NFTL is not set

#
# RAM/ROM/Flash chip drivers
#
CONFIG_MTD_CFI=y
CONFIG_MTD_CFI_VIRTUAL_ER=y
CONFIG_MTD_CFI_ADV_OPTIONS=y
CONFIG_MTD_CFI_NOSWAP=y
# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
# CONFIG_MTD_CFI_LART_BIT_SWAP is not set
CONFIG_MTD_CFI_GEOMETRY=y
CONFIG_MTD_CFI_B1=y
# CONFIG_MTD_CFI_B2 is not set
# CONFIG_MTD_CFI_B4 is not set
CONFIG_MTD_CFI_I1=y
# CONFIG_MTD_CFI_I2 is not set
CONFIG_MTD_CFI_I4=y
# CONFIG_MTD_CFI_INTELEXT is not set
CONFIG_MTD_CFI_AMDSTD=y
# CONFIG_MTD_AMDSTD is not set
# CONFIG_MTD_SHARP is not set
# CONFIG_MTD_RAM is not set
CONFIG_MTD_ROM=y
# CONFIG_MTD_JEDEC is not set

#
# Mapping drivers for chip access
#
CONFIG_MTD_PHYSMAP=y
CONFIG_MTD_PHYSMAP_START=ffe00000
CONFIG_MTD_PHYSMAP_LEN=200000
CONFIG_MTD_PHYSMAP_BUSWIDTH=4
# CONFIG_MTD_SUN_UFLASH is not set
# CONFIG_MTD_NORA is not set
# CONFIG_MTD_PNC2000 is not set
# CONFIG_MTD_RPXLITE is not set
# CONFIG_MTD_SC520CDP is not set
# CONFIG_MTD_NETSC520 is not set
# CONFIG_MTD_SBC_GXX is not set
# CONFIG_MTD_ELAN_104NC is not set
# CONFIG_MTD_SA1100 is not set
# CONFIG_MTD_SA1100_REDBOOT_PARTITIONS is not set
# CONFIG_MTD_SA1100_BOOTLDR_PARTITIONS is not set
# CONFIG_MTD_DC21285 is not set
# CONFIG_MTD_IQ80310 is not set
# CONFIG_MTD_DBOX2 is not set
# CONFIG_MTD_CSTM_MIPS_IXX is not set
# CONFIG_MTD_CFI_FLAGADM is not set
# CONFIG_MTD_MIXMEM is not set
# CONFIG_MTD_OCTAGON is not set
# CONFIG_MTD_VMAX is not set
# CONFIG_MTD_ARM is not set

#
# Self-contained MTD device drivers
#
# CONFIG_MTD_PMC551 is not set
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_MTDRAM is not set
# CONFIG_MTD_DOC1000 is not set
# CONFIG_MTD_DOC2000 is not set
# CONFIG_MTD_DOC2001 is not set
# CONFIG_MTD_DOCPROBE is not set

#
# NAND Flash Device Drivers
#
# CONFIG_MTD_NAND is not set
# CONFIG_MTD_NAND_SPIA is not set

______________________________________________

Thanks a lot!
zydlason

             reply	other threads:[~2001-05-14 13:33 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2001-05-14 13:35 zydla son [this message]
2001-05-14 13:46 ` kernel can not detect flash device David Woodhouse

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=DAV46AyfxRydC3hSsxL000018db@hotmail.com \
    --to=zydlason@hotmail.com \
    --cc=linux-mtd@lists.infradead.org \
    --cc=linuxppc-embedded@lists.linuxppc.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox