From mboxrd@z Thu Jan 1 00:00:00 1970 Received: from jeeves.momenco.com ([64.169.228.99] helo=host099.momenco.com ident=root) by pentafluge.infradead.org with esmtp (Exim 4.14 #3 (Red Hat Linux)) id 19EEUt-0005Mb-3Y for ; Fri, 09 May 2003 21:29:39 +0100 From: "Matthew Dharm" To: "Edward A. Hildum" Date: Fri, 9 May 2003 13:29:53 -0700 Message-ID: MIME-Version: 1.0 In-Reply-To: <5.1.1.5.2.20030509131915.015142c0@mail.arc.nasa.gov> Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit cc: linux-mtd@lists.infradead.org Subject: RE: DiskOnChip 2000 128Mb problem List-Id: Linux MTD discussion mailing list List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Did the Linux drivers work for you? Matt -- Matthew D. Dharm Senior Software Designer Momentum Computer Inc. 1815 Aston Ave. Suite 107 (760) 431-8663 X-115 Carlsbad, CA 92008-7310 Momentum Works For You www.momenco.com > -----Original Message----- > From: Edward A. Hildum [mailto:ehildum@mail.arc.nasa.gov] > Sent: Friday, May 09, 2003 1:24 PM > To: Matthew Dharm > Cc: linux-mtd@lists.infradead.org > Subject: RE: DiskOnChip 2000 128Mb problem > > > I had a similar experience using a DOC 2000 TSOP 256M part. > Its chip ID is > 0x30, which is right for a Millenium part, even though it > has a DOC 2000 > part number. The part also has an IPL which can be updated > like Millenium > parts. > > Ted Hildum > > At 09:58 AM 5/9/2003 -0700, you wrote: > > > -----Original Message----- > > > From: David Woodhouse [mailto:dwmw2@infradead.org] > > > Sent: Friday, May 09, 2003 9:48 AM > > > To: Matthew Dharm > > > Cc: linux-mtd@lists.infradead.org > > > Subject: RE: DiskOnChip 2000 128Mb problem > > > > > > > > > On Fri, 2003-05-09 at 17:40, Matthew Dharm wrote: > > > > Is it normal for a DoC 2000 to be detected as a Millenium? > > > > > > No, but it's not normal for its contents to be read back as > > > 0x01 0x02 > > > 0x03 etc. either: ) > > > >Okay, so we're all on the same page. > > > > > > I've already checked the bus width and timing. > > > > > > And it's definitely not set to 16-bit? -ECONFUSED. > > > >No kidding. I'm hoping the docs will have something > useful, and I'm > >about to pull out the bus analyizer. > > > > > >Matt > > > > > >______________________________________________________ > >Linux MTD discussion mailing list > >http://lists.infradead.org/mailman/listinfo/linux-mtd/ >