From mboxrd@z Thu Jan 1 00:00:00 1970 Received: from tomts15-srv.bellnexxia.net ([209.226.175.3]) by pentafluge.infradead.org with esmtp (Exim 3.22 #1 (Red Hat Linux)) id 16Beai-0002N5-00 for ; Wed, 05 Dec 2001 16:08:13 +0000 From: "Mike Ruthven" To: "David Woodhouse" , Cc: Subject: RE: nftl Date: Wed, 5 Dec 2001 11:18:24 -0500 Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset="US-ASCII" Content-Transfer-Encoding: 7bit In-Reply-To: <15764.1007566892@redhat.com> Sender: linux-mtd-admin@lists.infradead.org Errors-To: linux-mtd-admin@lists.infradead.org List-Help: List-Post: List-Subscribe: , List-Id: Linux MTD discussion mailing list List-Unsubscribe: , List-Archive: > -----Original Message----- > From: David Woodhouse [mailto:dwmw2@redhat.com]On Behalf Of David > Woodhouse > Sent: December 5, 2001 10:42 AM > To: ilatypov@infradead.org > Cc: Mike Ruthven; linux-mtd@lists.infradead.org > Subject: Re: nftl > > > > ilatypov@infradead.org said: > > I encountered the same with an M-Sys-pre-formatted DOC chip. It > > seems that the existing MTD code will work only after re-formatting > > the chip with the nftl_format. Correct me if I am wrong. > > Shouldn't take much to make that format work with our NFTL code. Again, > it's disabled mostly because it's not tested. > > -- > dwmw2 > > That's it. Thanks. Not that one case is a test, but I was able to nftl_format my DOC with erase size 0x4000.