From mboxrd@z Thu Jan 1 00:00:00 1970 From: guo_zl9@hotmail.com (guo_zhenglin) Date: Tue, 18 Mar 2003 17:40:16 +0800 Subject: How use FTP on serial port(COM1)? References: <20030317074641.GA9492@wohnheim.fh-wedel.de> <20030317100051.GB3930@wohnheim.fh-wedel.de> Message-ID: To: linux-mtd@lists.infradead.org List-Id: linux-mtd.lists.infradead.org I don't know how to config network (ftp) on MBX860 board, please help me. 1) our finally product is ourself-design board. the designer say no Ethernet port, and only has ONE serial port used to maintenance and update system. this board has not manufactured. 2) Our company has a DEMO board , it is motorola's MBX860 board. MBX860 board has a Ethernet port (SCC1). now I can test something about network on MBX860 board. 3) firstly I want to use ftp on MBX860 board via ethernet port(SCC1). if this success,then secondly, I TRY to use ftp on MBX860 board via serial port (COM1). if must need TWO serial ports , I can advice the designer to add another serial port. lastly ,I can use ftp on ourself-design board via serial port(COM1 or COM2). 4) but I don't know how to config network (ftp) on MBX860 board, counld you help me ? thank you very much. could I need modify "/etc/sysconfig/network-scripts" ,"/sbin/ifuup" ? 5) my linux kernel :2.4.4. CROSS_COMPILE: ppc_8xx-gcc (v2.95) 6) linux can boot from MBX860 board ,and show messages : NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 512 buckets, 4Kbytes TCP: Hash tables configured (established 1024 bind 1024) Sending BOOTP requests.... OK IP-Config: Got BOOTP answer from 192.168.1.252, my address is 192.168.1.1 NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. ------------------------------ guo zhenglin E-mail: guo_zl9 at hotmail.com ------------------------------