public inbox for linux-mtd@lists.infradead.org
 help / color / mirror / Atom feed
From: Rob Herring <robh@kernel.org>
To: "Cédric Le Goater" <clg@kaod.org>
Cc: linux-spi@vger.kernel.org, linux-mtd@lists.infradead.org,
	Mark Brown <broonie@kernel.org>,
	Tudor Ambarus <tudor.ambarus@microchip.com>,
	Pratyush Yadav <p.yadav@ti.com>,
	Miquel Raynal <miquel.raynal@bootlin.com>,
	Richard Weinberger <richard@nod.at>,
	Vignesh Raghavendra <vigneshr@ti.com>,
	linux-aspeed@lists.ozlabs.org, Joel Stanley <joel@jms.id.au>,
	Andrew Jeffery <andrew@aj.id.au>,
	Chin-Ting Kuo <chin-ting_kuo@aspeedtech.com>,
	devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org
Subject: Re: [PATCH v2 03/10] dt-bindings: spi: Add Aspeed SMC controllers device tree binding
Date: Wed, 2 Mar 2022 15:26:45 -0600	[thread overview]
Message-ID: <Yh/hFS2XW9SjK4Pl@robh.at.kernel.org> (raw)
In-Reply-To: <20220302173114.927476-4-clg@kaod.org>

On Wed, Mar 02, 2022 at 06:31:07PM +0100, Cédric Le Goater wrote:
> The "interrupt" property is optional because it is only necessary for
> controllers supporting DMAs (Not implemented yet in the new driver).
> 
> Cc: Chin-Ting Kuo <chin-ting_kuo@aspeedtech.com>
> Signed-off-by: Cédric Le Goater <clg@kaod.org>
> ---
>  .../bindings/spi/aspeed,ast2600-fmc.yaml      | 90 +++++++++++++++++++
>  MAINTAINERS                                   |  9 ++
>  2 files changed, 99 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/spi/aspeed,ast2600-fmc.yaml
> 
> diff --git a/Documentation/devicetree/bindings/spi/aspeed,ast2600-fmc.yaml b/Documentation/devicetree/bindings/spi/aspeed,ast2600-fmc.yaml
> new file mode 100644
> index 000000000000..0289a4f52196
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/spi/aspeed,ast2600-fmc.yaml
> @@ -0,0 +1,90 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/spi/aspeed,ast2600-fmc.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Aspeed SMC controllers bindings
> +
> +maintainers:
> +  - Chin-Ting Kuo <chin-ting_kuo@aspeedtech.com>
> +  - Cédric Le Goater <clg@kaod.org>
> +
> +description: |
> +  This binding describes the Aspeed Static Memory Controllers (FMC and
> +  SPI) of the AST2400, AST2500 and AST2600 SOCs.
> +
> +allOf:
> +  - $ref: "spi-controller.yaml#"
> +
> +properties:
> +  compatible:
> +    enum:
> +      - aspeed,ast2600-fmc
> +      - aspeed,ast2600-spi
> +      - aspeed,ast2500-fmc
> +      - aspeed,ast2500-spi
> +      - aspeed,ast2400-fmc
> +      - aspeed,ast2400-spi
> +
> +  reg:
> +    items:
> +      - description: registers
> +      - description: memory mapping
> +
> +  clocks:
> +    maxItems: 1
> +
> +  interrupts:
> +    maxItems: 1
> +
> +patternProperties:
> +  "@[0-9a-f]+":
> +    type: object
> +
> +    properties:
> +      spi-rx-bus-width:
> +        enum: [1, 2, 4]
> +
> +    required:
> +      - reg

No need for required here, spi-controller.yaml already enforces that.

Otherwise,

Reviewed-by: Rob Herring <robh@kernel.org>

> +
> +required:
> +  - compatible
> +  - reg
> +  - clocks
> +
> +unevaluatedProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +    #include <dt-bindings/interrupt-controller/aspeed-scu-ic.h>
> +    #include <dt-bindings/clock/ast2600-clock.h>
> +
> +    spi@1e620000 {
> +        reg = <0x1e620000 0xc4>, <0x20000000 0x10000000>;
> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +        compatible = "aspeed,ast2600-fmc";
> +        clocks = <&syscon ASPEED_CLK_AHB>;
> +        interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
> +        flash@0 {
> +                reg = < 0 >;
> +                compatible = "jedec,spi-nor";
> +                spi-max-frequency = <50000000>;
> +                spi-rx-bus-width = <2>;
> +        };
> +        flash@1 {
> +                reg = < 1 >;
> +                compatible = "jedec,spi-nor";
> +                spi-max-frequency = <50000000>;
> +                spi-rx-bus-width = <2>;
> +        };
> +        flash@2 {
> +                reg = < 2 >;
> +                compatible = "jedec,spi-nor";
> +                spi-max-frequency = <50000000>;
> +                spi-rx-bus-width = <2>;
> +        };
> +    };
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 4175103e928d..f5ab77548ef6 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -2925,6 +2925,15 @@ S:	Maintained
>  F:	Documentation/devicetree/bindings/mmc/aspeed,sdhci.yaml
>  F:	drivers/mmc/host/sdhci-of-aspeed*
>  
> +ASPEED SMC SPI DRIVER
> +M:	Chin-Ting Kuo <chin-ting_kuo@aspeedtech.com>
> +M:	Cédric Le Goater <clg@kaod.org>
> +L:	linux-aspeed@lists.ozlabs.org (moderated for non-subscribers)
> +L:	openbmc@lists.ozlabs.org (moderated for non-subscribers)
> +L:	linux-spi@vger.kernel.org
> +S:	Maintained
> +F:	Documentation/devicetree/bindings/spi/aspeed,ast2600-fmc.yaml
> +
>  ASPEED VIDEO ENGINE DRIVER
>  M:	Eddie James <eajames@linux.ibm.com>
>  L:	linux-media@vger.kernel.org
> -- 
> 2.34.1
> 
> 

______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

  reply	other threads:[~2022-03-02 21:36 UTC|newest]

Thread overview: 26+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-03-02 17:31 [PATCH v2 00/10] spi: spi-mem: Add driver for Aspeed SMC controllers Cédric Le Goater
2022-03-02 17:31 ` [PATCH v2 01/10] mtd: spi-nor: aspeed: Rename Kconfig option Cédric Le Goater
2022-03-02 22:16   ` Joel Stanley
2022-03-02 17:31 ` [PATCH v2 02/10] ARM: dts: aspeed: Adjust "reg" property of FMC/SPI controllers Cédric Le Goater
2022-03-02 22:18   ` Joel Stanley
2022-03-02 17:31 ` [PATCH v2 03/10] dt-bindings: spi: Add Aspeed SMC controllers device tree binding Cédric Le Goater
2022-03-02 21:26   ` Rob Herring [this message]
2022-03-02 22:20   ` Joel Stanley
2022-03-02 17:31 ` [PATCH v2 04/10] spi: spi-mem: Add driver for Aspeed SMC controllers Cédric Le Goater
2022-03-02 23:38   ` Joel Stanley
2022-03-02 17:31 ` [PATCH v2 05/10] spi: aspeed: Add support for direct mapping Cédric Le Goater
2022-03-02 22:48   ` Joel Stanley
2022-03-02 17:31 ` [PATCH v2 06/10] spi: aspeed: Adjust direct mapping to device size Cédric Le Goater
2022-03-02 22:31   ` Joel Stanley
2022-03-02 17:31 ` [PATCH v2 07/10] spi: aspeed: Workaround AST2500 limitations Cédric Le Goater
2022-03-02 22:30   ` Joel Stanley
2022-03-02 17:31 ` [PATCH v2 08/10] spi: aspeed: Add support for the AST2400 SPI controller Cédric Le Goater
2022-03-02 22:33   ` Joel Stanley
2022-03-02 17:31 ` [PATCH v2 09/10] spi: aspeed: Calibrate read timings Cédric Le Goater
2022-03-02 22:44   ` Joel Stanley
2022-03-02 17:31 ` [PATCH v2 10/10] ARM: dts: aspeed: Enable Dual SPI RX transfers Cédric Le Goater
2022-03-02 22:45   ` Joel Stanley
2022-03-02 22:48     ` Joel Stanley
2022-03-03  7:57       ` Cédric Le Goater
2022-03-03 10:01 ` [PATCH v2 00/10] spi: spi-mem: Add driver for Aspeed SMC controllers Joel Stanley
2022-03-04  7:57   ` Tao Ren

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=Yh/hFS2XW9SjK4Pl@robh.at.kernel.org \
    --to=robh@kernel.org \
    --cc=andrew@aj.id.au \
    --cc=broonie@kernel.org \
    --cc=chin-ting_kuo@aspeedtech.com \
    --cc=clg@kaod.org \
    --cc=devicetree@vger.kernel.org \
    --cc=joel@jms.id.au \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-aspeed@lists.ozlabs.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mtd@lists.infradead.org \
    --cc=linux-spi@vger.kernel.org \
    --cc=miquel.raynal@bootlin.com \
    --cc=p.yadav@ti.com \
    --cc=richard@nod.at \
    --cc=tudor.ambarus@microchip.com \
    --cc=vigneshr@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox