Re: [PATCH] mtd: spi-nor: Add support for BoHong bh25q128as

[<Tudor.Ambarus@microchip.com>]

On 6/28/21 8:48 AM, Tudor.Ambarus@microchip.com wrote:
> EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe
> 
> On 5/18/21 10:39 PM, David Bauer wrote:
>> EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe
>>
>> Hi Michael,
>>
>> Sorry for the late reply, was not feeling well past week.
>>
>> On 5/10/21 1:22 PM, Michael Walle wrote:
>>> Hi David,
>>>
>>> Am 2021-05-10 13:04, schrieb David Bauer:
>>>> On 5/10/21 12:56 PM, Michael Walle wrote:
>>>>> Am 2021-05-10 12:27, schrieb David Bauer:
>>>>>> On 5/10/21 11:35 AM, Michael Walle wrote:
>>>>>>> Am 2021-05-10 11:28, schrieb David Bauer:
>>>>>>>> On 5/10/21 10:00 AM, Michael Walle wrote
>>>>>>>>
>>>>>>>> [...]
>>>>>>>>
>>>>>>>>>> +static const struct flash_info bohong_parts[] = {
>>>>>>>>>> +    /* BoHong Microelectronics */
>>>>>>>>>> +    { "bh25q128as", INFO(0x684018, 0, 64 * 1024, 256,
>>>>>>>>>
>>>>>>>>> I couldn't find "BoHong" in JEP106BC. 0x68 (without continuation codes)
>>>>>>>>> is "Convex Computer". So this is wrong. OTOH I'm not sure, how many
>>>>>>>>> SPI flashes "convex computer" have, if any ;) This company was brought
>>>>>>>>> by HP in the end.
>>>>>>>>>
>>>>>>>>> In any case, this patch depends on how we handle continuation codes or
>>>>>>>>> if we can handle them at all. Or if this flash just lie about its
>>>>>>>>> manufacturer id and don't and CC.
>>>>>>>>
>>>>>>>> First of all, BoHong and Boya microelectronics seems to be the same
>>>>>>>> company, as their datasheets seem to copy each other. There's not much
>>>>>>>> information about either of both, so I'd say that's a fair assumption.
>>>>>>>>
>>>>>>>> Regarding the continuation codes, Boya is listed in bank nine, however
>>>>>>>> in this case I should currently read an all 0x7f ID shouldn't I?
>>>>>>>
>>>>>>> I'd guess so, yes.
>>>>>>>
>>>>>>>> The datasheet also only specifies 3 bytes as a return value for
>>>>>>>> register 0x9fh :(
>>>>>>>
>>>>>>> Yeah. So, this flash falls into the same category "simply hijacks
>>>>>>> a manuf id" as all the other flashes.
>>>>>>
>>>>>> From a quick check, this is also be the case for GigaDevices and XMC.
>>>>>>
>>>>>> My spontaneous idea would be to extend support for JEDEC IDs to read
>>>>>> the up to 9 banks of the vendor ID and fix up the existing offenders.
>>>>>
>>>>> you mean gigadevices and xmc? I'd presume they are also lacking the
>>>>> continuation bytes.
>>>>
>>>> Correct, same story with them.
>>>>
>>>>>
>>>>>> To not break existing boards, we could either skip the continuation
>>>>>> bytes of the kernel ID definitions for all flash chips or flag the
>>>>>> already existing ones and only perform this on such flagged chips.
>>>>>>
>>>>>> Personally, I'd say that only performing this on existing chips would
>>>>>> be better, as new vendors with this violation scheme might probably
>>>>>> appear and cause conflicts.
>>>>>>
>>>>>> As we still lack auto detection for new chips with that, configuring
>>>>>> the flash chip used with the chip name via DT would allow to set the
>>>>>> exact chip used and also validate if the manufacturer / product after
>>>>>> the continuation bits matches the one read from the chip.
>>>>>>
>>>>>> What do you think?
>>>>>
>>>>> If you'd ask me, unless there is a real world conflict, I'd just go
>>>>> ahead and add them as is. If there is a conflict we'd need to find
>>>>> a per device resolution for it.
>>>>
>>>> Okay, I'll resend a v2 with the removed copyright then.
>>>
>>> Could you also apply my SFDP patch [1] and send the dump (if there
>>> is any)? Unfortunately, I can't think of a good way to do that along
>>> with the patch and if this in some way regarded as copyrighted material.
>>> So feel free to send it to me privately. I'm starting to build a
>>> database.
>>
>> Bad news, I'm not able to get a SFDP with your patches, as the SFDP extraction
>> fails at the version check.
>>
>> Is there anything else I can try?
>>
> 
> So no SFDP data?
> Have you tried to read more of ID bytes, maybe there's an extended ID? Please
> dump 15 bytes of ID.

what's the difference between by25q128as and bh25q128as? I see they share the
same flash ID.

______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/