Re: [PATCH] mtd: ubi: avoid expensive do_div() on 32-bit machines

From: Zhihao Cheng <chengzhihao1@huawei.com>
To: Arnd Bergmann <arnd@kernel.org>,
	Richard Weinberger <richard@nod.at>,
	Miquel Raynal <miquel.raynal@bootlin.com>,
	Vignesh Raghavendra <vigneshr@ti.com>,
	Daniel Golle <daniel@makrotopia.org>
Cc: Arnd Bergmann <arnd@arndb.de>, <linux-mtd@lists.infradead.org>,
	<linux-kernel@vger.kernel.org>
Subject: Re: [PATCH] mtd: ubi: avoid expensive do_div() on 32-bit machines
Date: Wed, 13 Mar 2024 21:41:01 +0800	[thread overview]
Message-ID: <c7c8644b-3dcb-d949-f596-bb8d100f0fe5@huawei.com> (raw)
In-Reply-To: <20240313084707.3292300-1-arnd@kernel.org>

在 2024/3/13 16:46, Arnd Bergmann 写道:
> From: Arnd Bergmann <arnd@arndb.de>
> 
> The use of do_div() in ubi_nvmem_reg_read() makes calling it on
> 32-bit machines rather expensive. Since the 'from' variable is
> known to be a 32-bit quantity, it is clearly never needed and
> can be optimized into a regular division operation.
> 
> Fixes: b8a77b9a5f9c ("mtd: ubi: fix NVMEM over UBI volumes on 32-bit systems")
> Fixes: 3ce485803da1 ("mtd: ubi: provide NVMEM layer over UBI volumes")
> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
> ---
>   drivers/mtd/ubi/nvmem.c | 6 +++---
>   1 file changed, 3 insertions(+), 3 deletions(-)

Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com>
> 
> diff --git a/drivers/mtd/ubi/nvmem.c b/drivers/mtd/ubi/nvmem.c
> index 8aeb9c428e51..a94a1a9aaec1 100644
> --- a/drivers/mtd/ubi/nvmem.c
> +++ b/drivers/mtd/ubi/nvmem.c
> @@ -6,7 +6,6 @@
>   /* UBI NVMEM provider */
>   #include "ubi.h"
>   #include <linux/nvmem-provider.h>
> -#include <asm/div64.h>
>   
>   /* List of all NVMEM devices */
>   static LIST_HEAD(nvmem_devices);
> @@ -27,14 +26,15 @@ static int ubi_nvmem_reg_read(void *priv, unsigned int from,
>   	struct ubi_nvmem *unv = priv;
>   	struct ubi_volume_desc *desc;
>   	uint32_t offs;
> -	uint64_t lnum = from;
> +	uint32_t lnum;
>   	int err = 0;
>   
>   	desc = ubi_open_volume(unv->ubi_num, unv->vol_id, UBI_READONLY);
>   	if (IS_ERR(desc))
>   		return PTR_ERR(desc);
>   
> -	offs = do_div(lnum, unv->usable_leb_size);
> +	offs = from % unv->usable_leb_size;
> +	lnum = from / unv->usable_leb_size;
>   	while (bytes_left) {
>   		to_read = unv->usable_leb_size - offs;
>   
> 


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/