Re: [PATCH v4 3/4] mtd: spi-nor: winbond: add OTP support to w25q32fw/jw

[<Tudor.Ambarus@microchip.com>]

On 3/15/21 11:26 AM, Michael Walle wrote:
> EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe
> 
> Am 2021-03-15 09:26, schrieb Tudor.Ambarus@microchip.com:
>> On 3/6/21 2:05 AM, Michael Walle wrote:
>>> EXTERNAL EMAIL: Do not click links or open attachments unless you know
>>> the content is safe
>>>
>>> With all the helper functions in place, add OTP support for the
>>> Winbond
>>> W25Q32JW and W25Q32FW.
>>>
>>> Both were tested on a LS1028A SoC with a NXP FSPI controller.
>>>
>>> Signed-off-by: Michael Walle <michael@walle.cc>
>>> ---
>>>  drivers/mtd/spi-nor/winbond.c | 17 +++++++++++++++--
>>>  1 file changed, 15 insertions(+), 2 deletions(-)
>>>
>>> diff --git a/drivers/mtd/spi-nor/winbond.c
>>> b/drivers/mtd/spi-nor/winbond.c
>>> index e5dfa786f190..9a3f8ff007fd 100644
>>> --- a/drivers/mtd/spi-nor/winbond.c
>>> +++ b/drivers/mtd/spi-nor/winbond.c
>>> @@ -55,14 +55,18 @@ static const struct flash_info winbond_parts[] = {
>>>         { "w25q32", INFO(0xef4016, 0, 64 * 1024,  64, SECT_4K) },
>>>         { "w25q32dw", INFO(0xef6016, 0, 64 * 1024,  64,
>>>                            SECT_4K | SPI_NOR_DUAL_READ |
>>> SPI_NOR_QUAD_READ |
>>> -                          SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB) },
>>> +                          SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
>>> +                          OTP_INFO(256, 3, 0x1000, 0x1000)
>>> +       },
>>> +
>>>         { "w25q32jv", INFO(0xef7016, 0, 64 * 1024,  64,
>>>                            SECT_4K | SPI_NOR_DUAL_READ |
>>> SPI_NOR_QUAD_READ |
>>>                            SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
>>>         },
>>>         { "w25q32jwm", INFO(0xef8016, 0, 64 * 1024,  64,
>>>                             SECT_4K | SPI_NOR_DUAL_READ |
>>> SPI_NOR_QUAD_READ |
>>> -                           SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB) },
>>> +                           SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
>>> +                           OTP_INFO(256, 3, 0x1000, 0x1000) },
>>>         { "w25q64jwm", INFO(0xef8017, 0, 64 * 1024, 128,
>>>                             SECT_4K | SPI_NOR_DUAL_READ |
>>> SPI_NOR_QUAD_READ |
>>>                             SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB) },
>>> @@ -131,9 +135,18 @@ static int winbond_set_4byte_addr_mode(struct
>>> spi_nor *nor, bool enable)
>>>         return spi_nor_write_disable(nor);
>>>  }
>>>
>>> +static const struct spi_nor_otp_ops winbond_otp_ops = {
>>> +       .read = spi_nor_otp_read_secr,
>>> +       .write = spi_nor_otp_write_secr,
>>> +       .lock = spi_nor_otp_lock_sr2,
>>> +       .is_locked = spi_nor_otp_is_locked_sr2,
>>> +};
>>
>> Should we have this in otp.c? It can be shared with gigadevice as well
>> as far as I understood.
> 
> It should work in principle for both vendors, but I couldn't test it. So
> for now, I've kept it private to winbond.c. If there will be OTP support
> for other flashes with the same ops, it should be moved.
> 

Ok.

______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/