Linux-mtd Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Vignesh Raghavendra <vigneshr@ti.com>
To: Tudor Ambarus <tudor.ambarus@microchip.com>, <p.yadav@ti.com>,
	<boris.brezillon@collabora.com>
Cc: linux-mtd@lists.infradead.org, linux-kernel@vger.kernel.org
Subject: Re: [RFC PATCH 1/3] mtd: spi-nor: Introduce SNOR_F_IO_MODE_EN_VOLATILE
Date: Tue, 29 Sep 2020 22:15:30 +0530	[thread overview]
Message-ID: <dbfbe704-6d12-bdbd-db81-0296f5a9557a@ti.com> (raw)
In-Reply-To: <20200929095951.1575658-2-tudor.ambarus@microchip.com>



On 9/29/20 3:29 PM, Tudor Ambarus wrote:
> We don't want to enter a stateful mode, where a X-X-X I/O mode
> is entered by setting a non-volatile bit, because in case of a
> reset or a crash, once in the non-volatile mode, we may not be able
> to recover in bootloaders and we may break the SPI NOR boot.
> 
> Forbid by default the I/O modes that are set via a non-volatile bit.
> 
> SPI_NOR_IO_MODE_EN_VOLATILE should be set just for the flashes that
> don't define the optional SFDP SCCR Map, so that we don't pollute the
> flash info flags.
> 

I would make this SPI_NOR_IO_MODE_EN_NON_VOLATILE. Because flashes with
volatile bits to change IO modes are more common than non volatile ones
and above change makes its easier to spot such quirky flashes.

> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
> ---
>  drivers/mtd/spi-nor/core.c | 6 ++++++
>  drivers/mtd/spi-nor/core.h | 6 ++++++
>  2 files changed, 12 insertions(+)
> 
> diff --git a/drivers/mtd/spi-nor/core.c b/drivers/mtd/spi-nor/core.c
> index 34edfcf33172..c149b318e2e8 100644
> --- a/drivers/mtd/spi-nor/core.c
> +++ b/drivers/mtd/spi-nor/core.c
> @@ -3089,6 +3089,9 @@ static int spi_nor_octal_dtr_enable(struct spi_nor *nor, bool enable)
>  	      nor->write_proto == SNOR_PROTO_8_8_8_DTR))
>  		return 0;
>  
> +	if (!(nor->flags & SNOR_F_IO_MODE_EN_VOLATILE))
> +		return 0;
> +
>  	ret = nor->params->octal_dtr_enable(nor, enable);
>  	if (ret)
>  		return ret;
> @@ -3474,6 +3477,9 @@ int spi_nor_scan(struct spi_nor *nor, const char *name,
>  	if (info->flags & SPI_NOR_4B_OPCODES)
>  		nor->flags |= SNOR_F_4B_OPCODES;
>  
> +	if (info->flags & SPI_NOR_IO_MODE_EN_VOLATILE)
> +		nor->flags |= SNOR_F_IO_MODE_EN_VOLATILE;
> +
>  	ret = spi_nor_set_addr_width(nor);
>  	if (ret)
>  		return ret;
> diff --git a/drivers/mtd/spi-nor/core.h b/drivers/mtd/spi-nor/core.h
> index 10dc03506f93..c2755c82f978 100644
> --- a/drivers/mtd/spi-nor/core.h
> +++ b/drivers/mtd/spi-nor/core.h
> @@ -27,6 +27,7 @@ enum spi_nor_option_flags {
>  	SNOR_F_HAS_4BIT_BP      = BIT(12),
>  	SNOR_F_HAS_SR_BP3_BIT6  = BIT(13),
>  	SNOR_F_SOFT_RESET	= BIT(14),
> +	SNOR_F_IO_MODE_EN_VOLATILE = BIT(15),
>  };
>  
>  struct spi_nor_read_command {
> @@ -323,6 +324,11 @@ struct flash_info {
>  					 */
>  #define SPI_NOR_OCTAL_DTR_READ	BIT(19) /* Flash supports octal DTR Read. */
>  #define SPI_NOR_OCTAL_DTR_PP	BIT(20) /* Flash supports Octal DTR Page Program */
> +#define SPI_NOR_IO_MODE_EN_VOLATILE	BIT(21) /*
> +						 * Flash enables the best
> +						 * available I/O mode via a
> +						 * volatile bit.
> +						 */
>  
>  	/* Part specific fixup hooks. */
>  	const struct spi_nor_fixups *fixups;
> 

______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

  reply	other threads:[~2020-09-29 16:46 UTC|newest]

Thread overview: 49+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-09-16 12:44 [PATCH v13 00/15] mtd: spi-nor: add xSPI Octal DTR support Pratyush Yadav
2020-09-16 12:44 ` [PATCH v13 01/15] mtd: spi-nor: core: use EOPNOTSUPP instead of ENOTSUPP Pratyush Yadav
2020-09-29 11:30   ` Tudor.Ambarus
2020-09-16 12:44 ` [PATCH v13 02/15] mtd: spi-nor: core: add spi_nor_{read, write}_reg() helpers Pratyush Yadav
2020-09-29 11:38   ` [PATCH v13 02/15] mtd: spi-nor: core: add spi_nor_{read,write}_reg() helpers Tudor.Ambarus
2020-09-29 12:54     ` Pratyush Yadav
2020-09-16 12:44 ` [PATCH v13 03/15] mtd: spi-nor: core: add spi_nor_controller_ops_erase helper Pratyush Yadav
2020-09-16 12:44 ` [PATCH v13 04/15] mtd: spi-nor: add support for DTR protocol Pratyush Yadav
2020-09-16 12:44 ` [PATCH v13 05/15] mtd: spi-nor: sfdp: get command opcode extension type from BFPT Pratyush Yadav
2020-09-30  6:17   ` Tudor.Ambarus
2020-09-16 12:44 ` [PATCH v13 06/15] mtd: spi-nor: sfdp: parse xSPI Profile 1.0 table Pratyush Yadav
2020-09-30  6:44   ` Tudor.Ambarus
2020-09-30  6:53     ` Pratyush Yadav
2020-09-16 12:44 ` [PATCH v13 07/15] mtd: spi-nor: core: use dummy cycle and address width info from SFDP Pratyush Yadav
2020-09-30  6:46   ` Tudor.Ambarus
2020-09-16 12:44 ` [PATCH v13 08/15] mtd: spi-nor: core: do 2 byte reads for SR and FSR in DTR mode Pratyush Yadav
2020-09-30  6:50   ` Tudor.Ambarus
2020-09-30  6:55     ` Pratyush Yadav
2020-09-16 12:44 ` [PATCH v13 09/15] mtd: spi-nor: core: enable octal DTR mode when possible Pratyush Yadav
2020-09-29 11:26   ` Tudor.Ambarus
2020-09-29 12:51     ` Pratyush Yadav
2020-09-29 13:05       ` Tudor.Ambarus
2020-09-30  7:11   ` Tudor.Ambarus
2020-09-16 12:44 ` [PATCH v13 10/15] mtd: spi-nor: sfdp: detect Soft Reset sequence support from BFPT Pratyush Yadav
2020-09-30  7:23   ` Tudor.Ambarus
2020-09-30  7:31     ` Pratyush Yadav
2020-09-16 12:44 ` [PATCH v13 11/15] mtd: spi-nor: core: perform a Soft Reset on shutdown Pratyush Yadav
2020-09-29 13:08   ` Pratyush Yadav
2020-09-30  7:32     ` Tudor.Ambarus
2020-09-30  7:43       ` Pratyush Yadav
2020-09-16 12:44 ` [PATCH v13 12/15] mtd: spi-nor: core: disable Octal DTR mode on suspend Pratyush Yadav
2020-09-30  7:40   ` Tudor.Ambarus
2020-09-30  7:44     ` Pratyush Yadav
2020-09-16 12:44 ` [PATCH v13 13/15] mtd: spi-nor: core: expose spi_nor_default_setup() in core.h Pratyush Yadav
2020-09-30  7:51   ` Tudor.Ambarus
2020-09-30  8:03     ` Pratyush Yadav
2020-09-16 12:44 ` [PATCH v13 14/15] mtd: spi-nor: spansion: add support for Cypress Semper flash Pratyush Yadav
2020-09-30  8:36   ` Tudor.Ambarus
2020-09-30 12:32     ` Pratyush Yadav
2020-09-16 12:44 ` [PATCH v13 15/15] mtd: spi-nor: micron-st: allow using MT35XU512ABA in Octal DTR mode Pratyush Yadav
2020-09-30  9:12   ` Tudor.Ambarus
2020-09-29  9:59 ` [RFC PATCH 0/3] mtd: spi-nor: Tackle stateful modes Tudor Ambarus
2020-09-29  9:59   ` [RFC PATCH 1/3] mtd: spi-nor: Introduce SNOR_F_IO_MODE_EN_VOLATILE Tudor Ambarus
2020-09-29 16:45     ` Vignesh Raghavendra [this message]
2020-09-29  9:59   ` [RFC PATCH 2/3] mtd: spi-nor: Introduce MTD_SPI_NOR_ALLOW_STATEFUL_MODES Tudor Ambarus
2020-09-29 16:45     ` Vignesh Raghavendra
2020-09-29  9:59   ` [RFC PATCH 3/3] mtd: spi-nor: Parse SFDP SCCR Map Tudor Ambarus
2020-09-30  9:57 ` [PATCH v13 00/15] mtd: spi-nor: add xSPI Octal DTR support Tudor.Ambarus
2020-09-30 12:01   ` Pratyush Yadav

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=dbfbe704-6d12-bdbd-db81-0296f5a9557a@ti.com \
    --to=vigneshr@ti.com \
    --cc=boris.brezillon@collabora.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mtd@lists.infradead.org \
    --cc=p.yadav@ti.com \
    --cc=tudor.ambarus@microchip.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox