* MTD partition on ARM
@ 2007-04-01 19:59 harsh poshtiwala
2007-04-02 17:18 ` MikeW
0 siblings, 1 reply; 2+ messages in thread
From: harsh poshtiwala @ 2007-04-01 19:59 UTC (permalink / raw)
To: linux-mtd
I am novice to this stuff.
I need to make MTD partition followed by JFFS2 file system on
NOR flash of one of the ARM926ejs based board.
I didn't get much information about
1,How can i create MTD partition ? strps to create those.
2,Do i need to have MTD utilities ?
3,If yes what are the steps to integrate it ?
4,How can i implement JFFS2 on MTD partition?
I would appreciate your guidence /documentation that shows me
entire procedure to get me going on this stuff.
--
Thanks & Regards
Harsh
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: MTD partition on ARM
2007-04-01 19:59 MTD partition on ARM harsh poshtiwala
@ 2007-04-02 17:18 ` MikeW
0 siblings, 0 replies; 2+ messages in thread
From: MikeW @ 2007-04-02 17:18 UTC (permalink / raw)
To: linux-mtd
harsh poshtiwala <hiharsh <at> gmail.com> writes:
>
> I am novice to this stuff.
>
> I need to make MTD partition followed by JFFS2 file system on
> NOR flash of one of the ARM926ejs based board.
>
> I didn't get much information about
>
> 1,How can i create MTD partition ? strps to create those.
> 2,Do i need to have MTD utilities ?
> 3,If yes what are the steps to integrate it ?
> 4,How can i implement JFFS2 on MTD partition?
>
> I would appreciate your guidence /documentation that shows me
> entire procedure to get me going on this stuff.
>
I agree - there is no from-the-ground-up explanation and HowTo
for MTD. Unfortunately I am not yet expert enough myself to
write am authoritative guide.
Keep Googling (with a few well-chosen keywords as well as 'MTD') !!
Regards,
MikeW
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2007-04-02 17:19 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2007-04-01 19:59 MTD partition on ARM harsh poshtiwala
2007-04-02 17:18 ` MikeW
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox