From: Detlev Zundel <dzu@denx.de>
To: Mark Mason <mason@postdiluvian.org>
Cc: Anatolij Gustschin <agust@denx.de>,
linux-mtd@lists.infradead.org,
Artem Bityutskiy <dedekind1@gmail.com>
Subject: Re: UBIFS partition on NOR flash not mountable after power cut test
Date: Thu, 02 Dec 2010 10:17:36 +0100 [thread overview]
Message-ID: <m2hbew355b.fsf@ohwell.denx.de> (raw)
In-Reply-To: <20101202041048.GA5998@postdiluvian.org> (Mark Mason's message of "Wed, 1 Dec 2010 23:10:48 -0500")
Hi Mark,
[...]
>>From the same project, I do have some improvements to the MPC8315 NAND
> driver that allows higher bus throughput during erase cycles. There's
> a chance that this is applicable to other NAND controllers, but my
> experience is limited. I'd be more than happy to share my work with
> someone who has an interest in the 83xx, and I promise that I will do
> a better job at the details than I did with the CPUs in question.
Please do post your changes to the linuxppc-dev[1] mailing list. There
are a lot of people with interst on the 83xx chips there.
Thanks!
Detlev
[1] https://lists.ozlabs.org/listinfo/linuxppc-dev
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-40 Fax: (+49)-8142-66989-80 Email: dzu@denx.de
next prev parent reply other threads:[~2010-12-02 9:18 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-11-29 18:50 UBIFS partition on NOR flash not mountable after power cut test Anatolij Gustschin
2010-11-29 20:33 ` Mark Mason
2010-12-02 3:47 ` Artem Bityutskiy
2010-12-02 4:10 ` Mark Mason
2010-12-02 9:17 ` Detlev Zundel [this message]
2010-11-30 10:41 ` Norbert van Bolhuis
2010-11-30 15:35 ` Anatolij Gustschin
2010-12-01 9:38 ` Anatolij Gustschin
[not found] ` <AANLkTikEDQyNttTcKgHLwhR53sYSFbtVK-oy2S3END46@mail.gmail.com>
2010-12-01 9:47 ` Norbert van Bolhuis
2010-12-01 9:55 ` Anatolij Gustschin
[not found] ` <AANLkTikci0e2jaHCarA9HG86b_C-1UUcT_PMy-Q_mBrP@mail.gmail.com>
2010-12-01 13:06 ` Norbert van Bolhuis
2010-12-02 3:51 ` Artem Bityutskiy
2010-12-01 12:05 ` Anatolij Gustschin
2010-12-01 15:44 ` Anatolij Gustschin
2010-12-02 4:01 ` Artem Bityutskiy
2010-12-02 4:42 ` Artem Bityutskiy
2010-12-02 9:46 ` Matthieu CASTET
2010-12-02 12:18 ` Artem Bityutskiy
2010-12-02 9:57 ` Anatolij Gustschin
2010-12-02 12:18 ` Artem Bityutskiy
2010-12-02 13:23 ` Anatolij Gustschin
2010-12-02 13:35 ` Artem Bityutskiy
2010-12-02 13:50 ` Anatolij Gustschin
2010-12-02 13:57 ` Artem Bityutskiy
2010-12-02 14:18 ` Anatolij Gustschin
2010-12-03 10:07 ` Anatolij Gustschin
2010-12-03 10:23 ` Anatolij Gustschin
2010-12-03 10:28 ` Artem Bityutskiy
2010-12-03 10:41 ` Anatolij Gustschin
2010-12-03 10:49 ` Artem Bityutskiy
2010-12-03 11:15 ` Anatolij Gustschin
2010-12-02 3:46 ` Artem Bityutskiy
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=m2hbew355b.fsf@ohwell.denx.de \
--to=dzu@denx.de \
--cc=agust@denx.de \
--cc=dedekind1@gmail.com \
--cc=linux-mtd@lists.infradead.org \
--cc=mason@postdiluvian.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).