public inbox for linux-mtd@lists.infradead.org
 help / color / mirror / Atom feed
* JEDEC programming command spec
@ 2002-04-06 20:46 Jeremy Jackson
  2002-04-06 22:56 ` Eric W. Biederman
  0 siblings, 1 reply; 3+ messages in thread
From: Jeremy Jackson @ 2002-04-06 20:46 UTC (permalink / raw)
  To: linux-mtd

I read everywhere about the JEDEC std. commands...
but www.jedec.org only has CFI command set info.

Can anyone point me to this info?  Seems every vendor
has some variation, but without the original to compare with,
it seems impossible to know what is "standard" and what isn't.

Thanks,

Jeremy

^ permalink raw reply	[flat|nested] 3+ messages in thread

* Re: JEDEC programming command spec
  2002-04-06 20:46 JEDEC programming command spec Jeremy Jackson
@ 2002-04-06 22:56 ` Eric W. Biederman
  2002-04-07  1:34   ` Jeremy Jackson
  0 siblings, 1 reply; 3+ messages in thread
From: Eric W. Biederman @ 2002-04-06 22:56 UTC (permalink / raw)
  To: Jeremy Jackson; +Cc: linux-mtd

"Jeremy Jackson" <jerj@coplanar.net> writes:

> I read everywhere about the JEDEC std. commands...
> but www.jedec.org only has CFI command set info.
> 
> Can anyone point me to this info?  Seems every vendor
> has some variation, but without the original to compare with,
> it seems impossible to know what is "standard" and what isn't.

JESD21-C section 3.3.1 I think.

Eric

^ permalink raw reply	[flat|nested] 3+ messages in thread

* Re: JEDEC programming command spec
  2002-04-06 22:56 ` Eric W. Biederman
@ 2002-04-07  1:34   ` Jeremy Jackson
  0 siblings, 0 replies; 3+ messages in thread
From: Jeremy Jackson @ 2002-04-07  1:34 UTC (permalink / raw)
  To: Eric W. Biederman; +Cc: linux-mtd

Got it.  3.5.x actually. 

Thanks,

Jeremy

----- Original Message ----- 
From: "Eric W. Biederman" <ebiederman@lnxi.com>
To: "Jeremy Jackson" <jerj@coplanar.net>
Cc: <linux-mtd@lists.infradead.org>
Sent: Saturday, April 06, 2002 2:56 PM
Subject: Re: JEDEC programming command spec


> "Jeremy Jackson" <jerj@coplanar.net> writes:
> 
> > I read everywhere about the JEDEC std. commands...
> > but www.jedec.org only has CFI command set info.
> > 
> > Can anyone point me to this info?  Seems every vendor
> > has some variation, but without the original to compare with,
> > it seems impossible to know what is "standard" and what isn't.
> 
> JESD21-C section 3.3.1 I think.
> 
> Eric
> 

^ permalink raw reply	[flat|nested] 3+ messages in thread

end of thread, other threads:[~2002-04-07  1:42 UTC | newest]

Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2002-04-06 20:46 JEDEC programming command spec Jeremy Jackson
2002-04-06 22:56 ` Eric W. Biederman
2002-04-07  1:34   ` Jeremy Jackson

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox