From mboxrd@z Thu Jan 1 00:00:00 1970 Received: from ash.lnxi.com ([207.88.130.242] helo=DLT.linuxnetworx.com) by pentafluge.infradead.org with esmtp (Exim 3.22 #1 (Red Hat Linux)) id 16tz6h-0000Wl-00 for ; Sat, 06 Apr 2002 23:56:27 +0100 To: "Jeremy Jackson" Cc: Subject: Re: JEDEC programming command spec References: <004501c1ddac$1ca95f60$7e0aa8c0@bridge> From: ebiederman@lnxi.com (Eric W. Biederman) Date: 06 Apr 2002 15:56:21 -0700 In-Reply-To: <004501c1ddac$1ca95f60$7e0aa8c0@bridge> Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Sender: linux-mtd-admin@lists.infradead.org Errors-To: linux-mtd-admin@lists.infradead.org List-Help: List-Post: List-Subscribe: , List-Id: Linux MTD discussion mailing list List-Unsubscribe: , List-Archive: "Jeremy Jackson" writes: > I read everywhere about the JEDEC std. commands... > but www.jedec.org only has CFI command set info. > > Can anyone point me to this info? Seems every vendor > has some variation, but without the original to compare with, > it seems impossible to know what is "standard" and what isn't. JESD21-C section 3.3.1 I think. Eric