public inbox for linux-mtd@lists.infradead.org
 help / color / mirror / Atom feed
From: jiri.pinkava@vscht.cz (Jiri Pinkava)
To: linux-mtd@lists.infradead.org
Subject: [PATCH] nand: Fix S3C NAND clock stop
Date: Mon, 11 Apr 2011 03:20:33 +0200	[thread overview]
Message-ID: <mailman.197.1302491744.1530.linux-mtd@lists.infradead.org> (raw)

Current implementation of s3c2410_nand_select_chip call
clk_disable every time when chip = -1 (de-select). This happend
multiple times even if chip was already de-selected. This causes
disabling clock even if they are already disabled and due to
nature of clock subsytem implementation this causes nand clock
to be disabled and newer enabled again.

Signed-off-by: Jiri Pinkava <jiri.pinkava@vscht.cz>
---
 drivers/mtd/nand/s3c2410.c |   57 +++++++++++++++++++++++++++++++------------
 1 files changed, 41 insertions(+), 16 deletions(-)

diff --git a/drivers/mtd/nand/s3c2410.c b/drivers/mtd/nand/s3c2410.c
index 33d832d..fbc37dc 100644
--- a/drivers/mtd/nand/s3c2410.c
+++ b/drivers/mtd/nand/s3c2410.c
@@ -54,8 +54,14 @@ static int hardware_ecc = 1;
 static int hardware_ecc = 0;
 #endif
 
+#define CLOCK_DISABLE	0
+#define CLOCK_ENABLE	1
+#define CLOCK_SUSPEND	2
+
+static int clock_state = CLOCK_DISABLE;
+
 #ifdef CONFIG_MTD_NAND_S3C2410_CLKSTOP
-static int clock_stop = 1;
+static const int clock_stop = 1;
 #else
 static const int clock_stop = 0;
 #endif
@@ -159,11 +165,33 @@ static struct s3c2410_platform_nand *to_nand_plat(struct platform_device *dev)
 	return dev->dev.platform_data;
 }
 
-static inline int allow_clk_stop(struct s3c2410_nand_info *info)
+static inline int allow_clk_suspend(struct s3c2410_nand_info *info)
 {
 	return clock_stop;
 }
 
+/**
+ * s3c2410_nand_clk_set_state - Enable, disable or suspend NAND clock.
+ * @info: The controller instance.
+ * @new_state: State to which clock should be set.
+ */
+static void s3c2410_nand_clk_set_state(struct s3c2410_nand_info *info,
+		int new_state)
+{
+	if (!allow_clk_suspend(info) && new_state == CLOCK_SUSPEND)
+		return;
+
+	if (clock_state == CLOCK_ENABLE) {
+		if (new_state != CLOCK_ENABLE)
+			clk_disable(info->clk);
+	} else {
+		if (new_state == CLOCK_ENABLE)
+			clk_enable(info->clk);
+	}
+
+	clock_state = new_state;
+}
+
 /* timing calculations */
 
 #define NS_IN_KHZ 1000000
@@ -333,8 +361,8 @@ static void s3c2410_nand_select_chip(struct mtd_info *mtd, int chip)
 	nmtd = this->priv;
 	info = nmtd->info;
 
-	if (chip != -1 && allow_clk_stop(info))
-		clk_enable(info->clk);
+	if (chip != -1)
+		s3c2410_nand_clk_set_state(info, CLOCK_ENABLE);
 
 	cur = readl(info->sel_reg);
 
@@ -356,8 +384,8 @@ static void s3c2410_nand_select_chip(struct mtd_info *mtd, int chip)
 
 	writel(cur, info->sel_reg);
 
-	if (chip == -1 && allow_clk_stop(info))
-		clk_disable(info->clk);
+	if (chip == -1)
+		s3c2410_nand_clk_set_state(info, CLOCK_SUSPEND);
 }
 
 /* s3c2410_nand_hwcontrol
@@ -694,8 +722,7 @@ static int s3c24xx_nand_remove(struct platform_device *pdev)
 	/* free the common resources */
 
 	if (info->clk != NULL && !IS_ERR(info->clk)) {
-		if (!allow_clk_stop(info))
-			clk_disable(info->clk);
+		s3c2410_nand_clk_set_state(info, CLOCK_DISABLE);
 		clk_put(info->clk);
 	}
 
@@ -947,7 +974,7 @@ static int s3c24xx_nand_probe(struct platform_device *pdev)
 		goto exit_error;
 	}
 
-	clk_enable(info->clk);
+	s3c2410_nand_clk_set_state(info, CLOCK_ENABLE);
 
 	/* allocate and map the resource */
 
@@ -1026,9 +1053,9 @@ static int s3c24xx_nand_probe(struct platform_device *pdev)
 		goto exit_error;
 	}
 
-	if (allow_clk_stop(info)) {
+	if (allow_clk_suspend(info)) {
 		dev_info(&pdev->dev, "clock idle support enabled\n");
-		clk_disable(info->clk);
+		s3c2410_nand_clk_set_state(info, CLOCK_SUSPEND);
 	}
 
 	pr_debug("initialised ok\n");
@@ -1059,8 +1086,7 @@ static int s3c24xx_nand_suspend(struct platform_device *dev, pm_message_t pm)
 
 		writel(info->save_sel | info->sel_bit, info->sel_reg);
 
-		if (!allow_clk_stop(info))
-			clk_disable(info->clk);
+		s3c2410_nand_clk_set_state(info, CLOCK_DISABLE);
 	}
 
 	return 0;
@@ -1072,7 +1098,7 @@ static int s3c24xx_nand_resume(struct platform_device *dev)
 	unsigned long sel;
 
 	if (info) {
-		clk_enable(info->clk);
+		s3c2410_nand_clk_set_state(info, CLOCK_ENABLE);
 		s3c2410_nand_inithw(info);
 
 		/* Restore the state of the nFCE line. */
@@ -1082,8 +1108,7 @@ static int s3c24xx_nand_resume(struct platform_device *dev)
 		sel |= info->save_sel & info->sel_bit;
 		writel(sel, info->sel_reg);
 
-		if (allow_clk_stop(info))
-			clk_disable(info->clk);
+		s3c2410_nand_clk_set_state(info, CLOCK_SUSPEND);
 	}
 
 	return 0;
-- 
1.7.4.4


--------------040301050000000004070907--

             reply	other threads:[~2011-04-11  1:20 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-04-11  1:20 Jiri Pinkava [this message]
  -- strict thread matches above, loose matches on Subject: below --
2011-04-11  1:27 [PATCH] nand: Fix S3C NAND clock stop Jiri Pinkava
2011-04-11  2:05 ` Randy Dunlap
2011-04-11  3:15   ` Jiří Pinkava
2011-04-11 14:48     ` Jiri Pinkava
2011-04-13  3:36       ` Artem Bityutskiy

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=mailman.197.1302491744.1530.linux-mtd@lists.infradead.org \
    --to=jiri.pinkava@vscht.cz \
    --cc=linux-mtd@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox