From: Peter <pfheiss@philonline.com>
To: Linux Newbies <linux-newbie@vger.kernel.org>
Subject: Re: Mailer Connections
Date: Thu, 15 Aug 2002 09:09:20 +0800 [thread overview]
Message-ID: <200208150109.JAA01124@philonline.com> (raw)
In-Reply-To: Message from Riley Williams <rhw@InfraDead.Org> of "Wed, 14 Aug 2002 06:18:10 +0100." <Pine.LNX.4.21.0208140600380.8397-100000@Consulate.UFP.CX>
Thanks again Riley, apparently you are leaving in the UK.
said:
> The top "Received:" line gives the critical evidence when it reports
> "helo=localhost.localdomain" as this states that your system's
> hostname is currently set up as localhost.localdomain as stated, and
> this is also confirmed both by the bottom "Received:" line and by the
> "From:" line. As you can see, this is wrong.
I never had to edit /etc/sysconfig/network in all previous versions of RH.
Some kind program was doing the right thing for me. I only had to edit
/etc/hosts. Now when I had to re-install RH7.1 things went wrong. When I tried
to edit in /etc/hosts the line: "127.0.0.1 localhost.localdomain
localhost" to
"127.0.0.1 localhost" I could not print any longer and on booting, section
starting lpd, I would get a long complain not finding the printer.
I now then checked in RH6.2 /etc/sysconfig/network and it said there
HOSTNEAME="Peter". I put that into RH7.1 and now after your last mail changed
/etc/hosts
to:
127.0.0.1 localhost
202.95.238.2 philonline.com Peter
202.78.74.68 webcard.skyinet.net Pedro
Printer prints now and no complains on booting about lpd. I assume my from
address should be correct as well now.
I assume that you received my last mail twice. When I sent it the first time
and had changed HOSTNAME to "Peter" from localhost.localdomain I had not
rebooted as you suggested and I got the following messages in /var/log/maillog:
Aug 13 14:03:45 localhost sendmail[2687]: OAA02685:
to=<linux-newbie@vger.kernel.org>, ctladdr=<pfheiss@localhost.localdomain>
(500/500), delay=00:00:08, xdelay=00:00:05, mailer=esmtp,
relay=vger.kernel.org. [209.116.70.75], stat=Data format error
Aug 13 14:03:54 localhost sendmail[2687]: OAA02685: to=<rhw@InfraDead.Org>,
ctladdr=<pfheiss@localhost.localdomain> (500/500), delay=00:00:17,
xdelay=00:00:09, mailer=esmtp, relay=phoenix.infradead.org. [195.224.96.167],
stat=Sent (OK id=17eUmE-0008Fi-00)
after rebooting:
Aug 13 14:42:08 philonline sendmail[1158]: OAA01156:
to=<linux-newbie@vger.kernel.org>, ctladdr=<pfheiss@philonline.com> (500/500),
delay=00:00:11, xdelay=00:00:09, mailer=esmtp, relay=vger.kernel.org.
[209.116.70.75], stat=Sent (2.7.0 nothing apparently wrong in the message.)
Aug 13 14:42:16 philonline sendmail[1158]: OAA01156: to=<rhw@InfraDead.Org>,
ctladdr=<pfheiss@philonline.com> (500/500), delay=00:00:19, xdelay=00:00:08,
mailer=esmtp, relay=phoenix.infradead.org. [195.224.96.167], stat=Sent (OK
id=17eVNM-0008RL-00)
You can see that after rebooting my address is correct. You replied to the
first message where From: was wrong yet.
Did a programmer change something that one has to edit now
/etc/sysconfig/network a file I did not even know it existed or did I miss
something when installing RH7.1?
Regards
--
Peter
-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs
next prev parent reply other threads:[~2002-08-15 1:09 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <200208130603.OAA02685@localhost.localdomain>
2002-08-14 5:18 ` Mailer Connections Riley Williams
2002-08-15 1:09 ` Peter [this message]
2002-08-16 5:59 ` Riley Williams
2002-08-17 8:54 ` Peter
2002-08-17 9:43 ` Riley Williams
2002-08-15 17:41 ` Query regarding linking Abhijit Vijay
2002-08-15 10:09 Mailer Connections Peter
-- strict thread matches above, loose matches on Subject: below --
2002-08-14 7:18 Riley Williams
2002-08-13 15:41 Peter
2002-08-13 15:41 Peter
2002-08-11 6:19 Peter
2002-08-11 7:29 ` Riley Williams
2002-08-13 6:41 ` Peter
2002-08-11 14:55 ` Ray Olszewski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200208150109.JAA01124@philonline.com \
--to=pfheiss@philonline.com \
--cc=linux-newbie@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox