From mboxrd@z Thu Jan 1 00:00:00 1970 From: =?iso-8859-1?q?Jose=20Colmenares?= Subject: Re: IO Date: Sun, 4 Jan 2004 22:31:08 -0600 (CST) Sender: linux-newbie-owner@vger.kernel.org Message-ID: <20040105043108.87265.qmail@web61102.mail.yahoo.com> References: <200401040951.55784.pa3gcu@zeelandnet.nl> Mime-Version: 1.0 Content-Transfer-Encoding: QUOTED-PRINTABLE Return-path: In-Reply-To: <200401040951.55784.pa3gcu@zeelandnet.nl> List-Id: Content-Type: text/plain; charset="iso-8859-1" To: linux-newbie@vger.kernel.org I'm writing this for the archive. =46ound another card (similar to the one i had, but this one works): rtl8029. To use a rtl8019 on linux you have to set it in jumpless mode. Well, i believed you did that with a software, so i looked all over, and found some commands on DOS but where not recognize by winXP. But when i took it off to install the other, it had jumpers on it.=20 Next time, find all the hardware specifications! i didn't have them because i was using a computer wich had belonged to someone else and had lost practically every manual. The rtl8019 sometimes is setup in extrange io's by windows (i believe someone said something like that on the list). In order for it to work on linux you must set it in jumpless mode. So, there was no way i was going to get it done! Thanks everyone for the support. Hopefully, sometime i'll be answering this questions! :) _________________________________________________________ Do You Yahoo!? Informaci=F3n de Estados Unidos y Am=E9rica Latina, en Yahoo! Noticias. Vis=EDtanos en http://noticias.espanol.yahoo.com - To unsubscribe from this list: send the line "unsubscribe linux-newbie"= in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.linux-learn.org/faqs