From mboxrd@z Thu Jan 1 00:00:00 1970 From: Donald Duckie Subject: Re: Invalid kernel header included in userspace; multi-line string literals are deprecated Date: Tue, 14 Sep 2004 18:30:54 -0700 (PDT) Sender: linux-newbie-owner@vger.kernel.org Message-ID: <20040915013054.47905.qmail@web53607.mail.yahoo.com> References: <200409141121.12145.pa3gcu@zeelandnet.nl> Mime-Version: 1.0 Return-path: In-Reply-To: <200409141121.12145.pa3gcu@zeelandnet.nl> List-Id: Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: Richard Adams Cc: Linux Newbie Mailing List hi! i do not want to be assuming now, since i only got some errors from my assumptions. i have performed the options mentioned below but got some errors. what is sn0 and sn1? can modprobe or insmod know that snull.o is snull? (or am i getting the wrong idea here?) planning to do the following: > cd /to/snull/dir > modprobe snull > ifconfig sn0 10.1.2.11 up > ifconfig sn1 10.1.2.12 up > route add -net 10.1.2.0 netmask 255.255.255.0 sn0 > route add -net 10.1.2.0 netmask 255.255.255.0 sn1 and the result: ---> cd /lib/modules/2.4.18-sh/misc ls snull.o modprobe snull modprobe: Can't locate module snull (i supposed that i cant continue from here, but just tried) ifconfig sn0 101.11.21.111 up SIOCSIFADDR: No such device sn0: unknown interface: No such device sn0: unknown interface: No such device ifconfig sn1 101.11.21.121 up SIOCSIFADDR: No such device sn1: unknown interface: No such device sn1: unknown interface: No such device route add -net 101.11.21.0 netmask 255.255.255.0 sn0 SIOCADDRT: No such device route add -net 101.11.21.0 netmask 255.255.255.0 sn1 SIOCADDRT: No such device planning to do the following: > You can also place the snull modules in /lib/modules/2.4.18/kernel/drivers/net > run depmod -a > place the following in /etc/modules.conf > alias sn0 snull > alias sn1 snull and the result: ---> cp /lib/modules/2.4.18-sh/misc/snull.o /lib/modules/2.4.18-sh/kernel/drivers/net/. depmod -a then edited /etc/modules.conf to add the mentioned aliases the redo the procedures: modprobe snull; ifconfig sn0 101.11.21.111 up; ifconfig sn1 101.11.21.121 up; route add -net 101.11.21.0 netmask 255.255.255.0 sn0; route add -net 101.11.21.0 netmask 255.255.255.0 sn1 the same results were seen what seems to be wrong with sn? am i doing something wrong in here? thanks for all the information and assistance . . . --- Richard Adams wrote: > On Tuesday 14 Sep 2004 05:48, Donald Duckie wrote: > > hi! > > > > thank you very much :-) > > the make mrproper; make oldconfig; and make dep > were > > all that was lacking . . . whew!!! > > > > for my next steps though, where can i find some > > information on snull_load and snull_unload? > > running them gave me the following errors: > > No idea, but here is your answer(s). > > > [aphrodite@aphrodite2 snull]$ snull_load > > ./snull.o: ELF file ./snull.o not for this > > architecture > > You need to be root to insert modules. > As root do; > cd /to/where/snull_load/file/is > chmod a+x snull_load > > ./snull_load > But you will still get some errors because local0 > and local1 are not know on > your system, either define them in /etc/hosts or > edit snull_load and replace > local0 and local1 with an internal IP# as in. > ifconfig sn0 10.1.2.11 > ifconfig sn1 10.1.2.12 > > > > local0: Host name lookup failure > > ifconfig: `--help' gives usage information. > > local1: Host name lookup failure > > ifconfig: `--help' gives usage information. > > They are not defined in /etc/hosts. > > > > > [aphrodite@aphrodite2 snull]$ snull_unload > > sn0: unknown interface: No such device > > sn1: unknown interface: No such device > > snull: Operation not permitted > > Because the ifconfig line had an invalid host > nothing gets configured. > > You can as root simply do; > cd /to/snull/dir > modprobe snull > ifconfig sn0 10.1.2.11 up > ifconfig sn1 10.1.2.12 up > route add -net 10.1.2.0 netmask 255.255.255.0 sn0 > route add -net 10.1.2.0 netmask 255.255.255.0 sn1 > > You can also place the snull modules in > /lib/modules/2.4.18/kernel/drivers/net > run depmod -a > place the following in /etc/modules.conf > alias sn0 snull > alias sn1 snull > Now if you use ifconfig to up the interface without > loading the module first > then it should get loaded automaticly altho, i have > not tryed it here because > i do not intend to use snX ifc's. > > -- > If the Linux community is a bunch of thieves because > they > try to imitate windows programs, then the Windows > community > is built on organized crime. > > Regards Richard > pa3gcu@zeelandnet.nl > http://people.zeelandnet.nl/pa3gcu/ > > - > To unsubscribe from this list: send the line > "unsubscribe linux-newbie" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at > http://vger.kernel.org/majordomo-info.html > Please read the FAQ at > http://www.linux-learn.org/faqs > __________________________________ Do you Yahoo!? Yahoo! Mail - 50x more storage than other providers! http://promotions.yahoo.com/new_mail - To unsubscribe from this list: send the line "unsubscribe linux-newbie" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.linux-learn.org/faqs