From mboxrd@z Thu Jan 1 00:00:00 1970 From: Greg KH Subject: Re: Incorrect driver getting loaded for Qlogic FC-HBA Date: Mon, 25 Jul 2005 17:06:00 -0700 Message-ID: <20050726000600.GB23858@kroah.com> References: Mime-Version: 1.0 Return-path: Content-Disposition: inline In-Reply-To: Sender: linux-newbie-owner@vger.kernel.org List-Id: Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: Rajat Jain Cc: kernelnewbies@nl.linux.org, linux-scsi@vger.kernel.org, linux-newbie@vger.kernel.org, linux-kernel@vger.kernel.org On Mon, Jul 25, 2005 at 11:02:39AM +0900, Rajat Jain wrote: > I'm using Kernel 2.6.9 and am having a Qlogic QLE2362 FC-HBA in my > system. I selected all the Qlogic SCSI drivers while buiding the > kernel. Now the problem is that every time I reboot, I have to > MANUALLY modprobe the qla2322.ko module in the kernel and only then my > HBA works. By default, the kernel loads qla2300.ko, which is not the > correct driver for the card, and hence the HBA does not work. Here is > the lspci output: "by default" the kernel does not load any modules. That's up to the hotplug system, or some other package. thanks, greg k-h - To unsubscribe from this list: send the line "unsubscribe linux-newbie" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.linux-learn.org/faqs