From mboxrd@z Thu Jan 1 00:00:00 1970 From: Andrew Subject: scsi hd Date: Mon, 15 May 2006 21:00:36 +0200 Message-ID: <4468CFD4.6090202@arrakis.es> Mime-Version: 1.0 Content-Transfer-Encoding: 7bit Return-path: Sender: linux-newbie-owner@vger.kernel.org List-Id: Content-Type: text/plain; charset="us-ascii"; format="flowed" To: linux-newbie@vger.kernel.org I am trying to install an scsi hd (IBM DDRS 34560) on a P4 runnning Slackware 10.2 / 2.6.13. The hd came out of a pII/300 I found and which worked perfectly once I changed the ram. At the moment it has an ntfs system on it. The scsi adaptor it was attached to is an Adaptec AHA-2940U/UW/D / AIC-7881U. I think the right module is the aha152x. CONFIG_SCSI = y I don't know what else I need configured. The aha152x module loads without errors. Where do I go from here? /proc/scsi/scsi does not list any devices. Presumably I am missing one or more steps. TIA, Andrew - To unsubscribe from this list: send the line "unsubscribe linux-newbie" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.linux-learn.org/faqs