From mboxrd@z Thu Jan 1 00:00:00 1970 From: ali shahrokni Subject: Firewire camera and PCMCIA card under Debian Date: Mon, 11 Sep 2006 17:37:06 +0100 Message-ID: <450590B2.4000809@laposte.net> Mime-Version: 1.0 Content-Transfer-Encoding: 7bit Return-path: Sender: linux-newbie-owner@vger.kernel.org List-Id: Content-Type: text/plain; charset="us-ascii"; format="flowed" To: linux-newbie@vger.kernel.org Hello, I am trying to connect a unibrain firewire camera to my T40 thinkpad using a PCMCIA firecard. I am running debian testing and kernel 2.6.15. The card is detected and the output of dmeg follows but the camera doesn't even turn on and nothing happens when I connect it to the card! Any help would be greatly appreciated. Cheers, Ali ieee1394: raw1394: /dev/raw1394 device initialized video1394: Installed video1394 module usb 2-2: new full speed USB device using uhci_hcd and address 3 pccard: card ejected from slot 1 ieee1394: Node removed: ID:BUS[0-00:1023] GUID[0814435800000528] ohci1394: fw-host0: Set PHY Reg timeout [0xffffffff/0x00004000/100] ohci1394: fw-host0: Set PHY Reg timeout [0xffffffff/0x00004000/100] pccard: CardBus card inserted into slot 1 PCI: Enabling device 0000:07:00.0 (0000 -> 0002) ACPI: PCI Interrupt 0000:07:00.0[A] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11 PCI: Setting latency timer of device 0000:07:00.0 to 64 ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[11] MMIO=[c4004000-c40047ff] Max Packet=[2048] eth1394: eth1: IEEE-1394 IPv4 over 1394 Ethernet (fw-host0) ieee1394: Host added: ID:BUS[0-00:1023] GUID[0814435800000528] - To unsubscribe from this list: send the line "unsubscribe linux-newbie" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.linux-learn.org/faqs