From mboxrd@z Thu Jan 1 00:00:00 1970 From: "mohammed shareef" Subject: unknown partition table Date: Mon, 16 Jun 2008 23:13:22 +0530 Message-ID: Mime-Version: 1.0 Content-Transfer-Encoding: 7bit Return-path: DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=gamma; h=domainkey-signature:received:received:message-id:date:from:to :subject:mime-version:content-type:content-transfer-encoding :content-disposition; bh=BkNiHRoJRT4rl0qBJJjtgZLCQKtZaWSWOBjrVbM6rzI=; b=SivMrSUF5eTLJtkbVe+E2Zilaox1rAAY9rB0ddMTcFMyU/+gc/c3bfpBNhkMihnnhY 4Xq+IHIzBmKgN5c1s6+Kv2jpA1+NRo/XT4yEAPmnu0/7hJdP+GM2R4lAf3YM2PwLhicb rQWxc6eQlKBTYmx9Q/lXW6GglUk9lYGV8t76k= Content-Disposition: inline Sender: linux-newbie-owner@vger.kernel.org List-ID: Content-Type: text/plain; charset="us-ascii" To: omap , linux-newbie@vger.kernel.org Hi, I am trying to configure usb host on the osk to mount flash pen-drives. when i do mount i get the following error: "unknown partition table" has someone else come across the same kind of issue? # mount /dev/sda1 /mnt/usb -t vfat nfs: server 10.114.5.48 not responding, still trying nfs: server 10.114.5.48 OK ohci ohci: wakeup usb 1-1: new full speed USB device using ohci and address 2 usb 1-1: configuration #1 chosen from 1 choice scsi0 : SCSI emulation for USB Mass Storage devices Vendor: CBM Model: Flash Disk Rev: 5.00 Type: Direct-Access ANSI SCSI revision: 02 SCSI device sda: 2051072 512-byte hdwr sectors (1050 MB) sda: Write Protect is off sda: assuming drive cache: write through SCSI device sda: 2051072 512-byte hdwr sectors (1050 MB) sda: Write Protect is off sda: assuming drive cache: write through sda:<7>usb-storage: queuecommand called unknown partition table sd 0:0:0:0: Attached scsi removable disk sda thank you, regards, Shareef -- To unsubscribe from this list: send the line "unsubscribe linux-newbie" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.linux-learn.org/faqs