From mboxrd@z Thu Jan 1 00:00:00 1970 From: Ole Martin Handeland Subject: RTL network card problem Date: Tue, 21 Sep 2004 17:54:34 +0200 Sender: linux-newbie-owner@vger.kernel.org Message-ID: Mime-Version: 1.0 Content-Transfer-Encoding: 7bit Return-path: List-Id: Content-Type: text/plain; charset="us-ascii"; format="flowed" To: linux-newbie@vger.kernel.org Hi, When i just inserted this second network card my redhat network config shows this: Desc. Type Device Status RTL-8139/8139C/8139C+ Ethernet eth0 ok RTL-8139/8139C/8139C+ Unknown dev22193 ok Yes, i have two pci slots with two identical cards in. ifconfig shows this: dev22193 Link encap:Ethernet HWaddr 00:E0:4C:39:32:3F inet addr:192.168.0.5 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::2e0:4cff:fe39:323f/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:55 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 b) TX bytes:7474 (7.2 Kb) Interrupt:10 Base address:0xc000 eth0 Link encap:Ethernet HWaddr 00:10:A7:13:CB:0D inet addr:192.168.1.101 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::210:a7ff:fe13:cb0d/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:108 errors:0 dropped:0 overruns:0 frame:0 TX packets:37 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:16616 (16.2 Kb) TX bytes:4623 (4.5 Kb) Interrupt:11 Base address:0xc400 So, my question is: why is this network card just partially found? my kudzu found it, i configured it, and it dont work...? System: 700mhz celeron, 256mb ram, fedora core 2, and, as you see, one and a half network cards... - To unsubscribe from this list: send the line "unsubscribe linux-newbie" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.linux-learn.org/faqs