linux-next.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
To: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>,
	linux-next@vger.kernel.org
Subject: Re: linux-next: ide build failure
Date: Mon, 16 Jun 2008 13:55:43 +1000	[thread overview]
Message-ID: <1213588543.8129.122.camel@pasglop> (raw)
In-Reply-To: <20080616133817.83c9f304.sfr@canb.auug.org.au>

On Mon, 2008-06-16 at 13:38 +1000, Stephen Rothwell wrote:
> Hi Bart,
> 
> Today's linux-next build (powerpc ppc64_defconfig) failed like this:
> 
> drivers/ide/ppc/pmac.c: In function 'pmac_ide_cable_detect':
> drivers/ide/ppc/pmac.c:926: error: implicit declaration of function 'drv_get_drvdata'
> drivers/ide/ppc/pmac.c:926: warning: cast to pointer from integer of different size
> drivers/ide/ppc/pmac.c: In function 'pmac_ide_init_dev':
> drivers/ide/ppc/pmac.c:950: warning: cast to pointer from integer of different size
> drivers/ide/ppc/pmac.c: In function 'pmac_ide_setup_device':
> drivers/ide/ppc/pmac.c:1082: error: request for member 'irq' in something not a structure or union
> drivers/ide/ppc/pmac.c: In function 'pmac_ide_pci_suspend':
> drivers/ide/ppc/pmac.c:1321: error: 'hwif' undeclared (first use in this function)
> drivers/ide/ppc/pmac.c:1321: error: (Each undeclared identifier is reported only once
> drivers/ide/ppc/pmac.c:1321: error: for each function it appears in.)
> drivers/ide/ppc/pmac.c:1316: warning: unused variable 'pmif'
> drivers/ide/ppc/pmac.c: In function 'pmac_ide_pci_resume':
> drivers/ide/ppc/pmac.c:1336: error: 'hwif' undeclared (first use in this function)
> drivers/ide/ppc/pmac.c:1332: warning: unused variable 'pmif'
> 
> I applied the patch below ... (which clearly needs work)

Bart, I hadn't managed to review / test your new patches yet, but
please, avoid putting anything touching the pmac stuff in your
"next" tree until it's been fully acked by me. Stuff in linux-next
is stuff that is supposed to be -ready to be merged- upstream. Those
patches definitely are not.

Thanks !

Ben.

> -- 
> Cheers,
> Stephen Rothwell                    sfr@canb.auug.org.au
> http://www.canb.auug.org.au/~sfr/
> 
> >From e23339391c5e18a12f2c5d51ca5032df92d9d978 Mon Sep 17 00:00:00 2001
> From: Stephen Rothwell <sfr@canb.auug.org.au>
> Date: Mon, 16 Jun 2008 13:35:36 +1000
> Subject: [PATCH] ide pmac fixes 1
> 
> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
> ---
>  drivers/ide/ppc/pmac.c |   16 ++++++++--------
>  1 files changed, 8 insertions(+), 8 deletions(-)
> 
> diff --git a/drivers/ide/ppc/pmac.c b/drivers/ide/ppc/pmac.c
> index 0671fb8..363bc4e 100644
> --- a/drivers/ide/ppc/pmac.c
> +++ b/drivers/ide/ppc/pmac.c
> @@ -923,7 +923,7 @@ static int pmac_ide_do_resume(pmac_ide_hwif_t *pmif)
>  static u8 pmac_ide_cable_detect(ide_hwif_t *hwif)
>  {
>  	pmac_ide_hwif_t *pmif =
> -		(pmac_ide_hwif_t *)drv_get_drvdata(hwif->gendev.parent);
> +		(pmac_ide_hwif_t *)dev_get_drvdata(hwif->gendev.parent);
>  	struct device_node *np = pmif->node;
>  	const char *cable = of_get_property(np, "cable-type", NULL);
>  
> @@ -947,7 +947,7 @@ static void pmac_ide_init_dev(ide_drive_t *drive)
>  {
>  	ide_hwif_t *hwif = drive->hwif;
>  	pmac_ide_hwif_t *pmif =
> -		(pmac_ide_hwif_t *)drv_get_drvdata(hwif->gendev.parent);
> +		(pmac_ide_hwif_t *)dev_get_drvdata(hwif->gendev.parent);
>  
>  	if (pmif->mediabay) {
>  #ifdef CONFIG_PMAC_MEDIABAY
> @@ -1076,10 +1076,10 @@ static int __devinit pmac_ide_setup_device(pmac_ide_hwif_t *pmif, hw_regs_t *hw)
>  		msleep(jiffies_to_msecs(IDE_WAKEUP_DELAY));
>  	}
>  
> -	printk(KERN_INFO DRV_NAME ": Found Apple %s controller (%s), "
> -			 "bus ID %d%s, irq %d\n", model_name[pmif->kind],
> -			 pmif->mdev ? "MacIO" : "PCI", pmif->aapl_bus_id,
> -			 pmif->mediabay ? " (mediabay)" : "", hw.irq);
> +//	printk(KERN_INFO DRV_NAME ": Found Apple %s controller (%s), "
> +//			 "bus ID %d%s, irq %d\n", model_name[pmif->kind],
> +//			 pmif->mdev ? "MacIO" : "PCI", pmif->aapl_bus_id,
> +//			 pmif->mediabay ? " (mediabay)" : "", hw.irq);
>  
>  	hwif = ide_find_port_slot(&d);
>  	if (hwif == NULL)
> @@ -1318,7 +1318,7 @@ pmac_ide_pci_suspend(struct pci_dev *pdev, pm_message_t mesg)
>  
>  	if (mesg.event != pdev->dev.power.power_state.event
>  			&& (mesg.event & PM_EVENT_SLEEP)) {
> -		rc = pmac_ide_do_suspend(hwif);
> +		rc = pmac_ide_do_suspend(pmif);
>  		if (rc == 0)
>  			pdev->dev.power.power_state = mesg;
>  	}
> @@ -1333,7 +1333,7 @@ pmac_ide_pci_resume(struct pci_dev *pdev)
>  	int rc = 0;
>  
>  	if (pdev->dev.power.power_state.event != PM_EVENT_ON) {
> -		rc = pmac_ide_do_resume(hwif);
> +		rc = pmac_ide_do_resume(pmif);
>  		if (rc == 0)
>  			pdev->dev.power.power_state = PMSG_ON;
>  	}


  reply	other threads:[~2008-06-16  3:58 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2008-06-16  3:38 linux-next: ide build failure Stephen Rothwell
2008-06-16  3:55 ` Benjamin Herrenschmidt [this message]
2008-06-16  9:54   ` Bartlomiej Zolnierkiewicz
2008-06-16 19:24     ` Bartlomiej Zolnierkiewicz
2008-06-16 22:40     ` Benjamin Herrenschmidt
2008-06-17  9:53       ` Bartlomiej Zolnierkiewicz
  -- strict thread matches above, loose matches on Subject: below --
2008-05-30  1:54 Stephen Rothwell
2008-05-31 13:38 ` Bartlomiej Zolnierkiewicz
2008-06-01  2:05   ` Stephen Rothwell

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1213588543.8129.122.camel@pasglop \
    --to=benh@kernel.crashing.org \
    --cc=bzolnier@gmail.com \
    --cc=linux-next@vger.kernel.org \
    --cc=sfr@canb.auug.org.au \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).